Yeni bir modül filan yüklemem gerekir mi? $u anda lsmod ciktim $öyle:
Module Size Used by
nvidia 3923452 12
ipv6 254720 12
binfmt_misc 11496 1
af_packet 21704 4
8139too 25952 0
8139cp 20160 0
mii 4992 2 8139too,8139cp
snd_via82xx 27872 0
snd_ac97_codec 78360 1 snd_via82xx
snd_pcm 92712 2 snd_via82xx,snd_ac97_codec
snd_timer 24644 1 snd_pcm
snd_page_alloc 10020 2 snd_via82xx,snd_pcm
gameport 4480 1 snd_via82xx
snd_mpu401_uart 7488 1 snd_via82xx
snd_rawmidi 24032 1 snd_mpu401_uart
snd_seq_device 8652 1 snd_rawmidi
snd 55300 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
via686a 20184 0
i2c_sensor 3520 1 via686a
i2c_viapro 7888 0
i2c_core 22320 3 via686a,i2c_sensor,i2c_viapro
uhci_hcd 32400 0
pci_hotplug 33136 0
via_agp 9568 1
agpgart 34792 2 nvidia,via_agp
tsdev 7776 0
mousedev 11640 2
psmouse 29320 0
parport_pc 35972 0
parport 36936 1 parport_pc
floppy 60176 0
pcspkr 3364 0
evdev 9568 0
nls_cp437 5632 1
ntfs 111760 1
dm_mod 61948 0
sr_mod 17540 0
cdrom 41216 1 sr_mod
capability 4712 0
commoncap 6880 1 capability
ide_scsi 16132 0
sg 38944 0
usb_storage 70720 0
usbcore 120312 3 uhci_hcd,usb_storage
via82cxxx_audio 30216 1
uart401 11588 1 via82cxxx_audio
sound 79884 2 via82cxxx_audio,uart401
soundcore 9664 4 snd,via82cxxx_audio,sound
ac97_codec 19916 1 via82cxxx_audio
ac97 5152 0
genrtc 8936 0
ext2 68712 1
ext3 143368 1
jbd 58200 1 ext3
mbcache 9444 2 ext2,ext3
ide_disk 18048 5
ide_generic 1216 0 [permanent]
via82cxxx 13820 0 [permanent]
trm290 4260 0 [permanent]
triflex 3712 0 [permanent]
slc90e66 5792 0 [permanent]
sis5513 16424 0 [permanent]
siimage 12576 0 [permanent]
serverworks 9192 0 [permanent]
sc1200 7296 0 [permanent]
rz1000 2496 0 [permanent]
piix 10308 0 [permanent]
pdc202xx_old 11296 0 [permanent]
opti621 4452 0 [permanent]
ns87415 4264 0 [permanent]
hpt366 20064 0 [permanent]
hpt34x 5216 0 [permanent]
generic 3904 0 [permanent]
cy82c693 4708 0 [permanent]
cs5530 5248 0 [permanent]
cs5520 4640 0 [permanent]
cmd64x 12028 0 [permanent]
atiixp 5840 0 [permanent]
amd74xx 14332 0 [permanent]
alim15x3 12140 0 [permanent]
aec62xx 7168 0 [permanent]
pdc202xx_new 9024 0 [permanent]
ide_core 130384 29 ide_scsi,usb_storage,ide_disk,ide_generic,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,server
works,sc1200,rz1000,piix,pdc202xx_old,opti621,ns87415,hpt366,hpt34x,generic,cy82c693,cs5530,cs5520,cmd64x,atiixp,amd74xx,alim15x3,a
ec62xx,pdc202xx_new
sd_mod 19024 0
ata_piix 9572 0
libata 48452 1 ata_piix
scsi_mod 137064 6 sr_mod,ide_scsi,sg,usb_storage,sd_mod,libata
unix 27476 68
fbcon 38656 0
font 8192 1 fbcon
bitblit 5664 1 fbcon
vesafb 8088 0
cfbcopyarea 4000 1 vesafb
cfbimgblt 2944 1 vesafb
cfbfillrect 3648 1 vesafb
-----Original Message-----
From: Emre Sevinc
Sent: Sat 7/30/2005 10:29 PM
To: Emre Sevinc; Erçin EKER; debian-user-turkish@lists.debian.org
Subject: RE: kernel 2.6'da cdrom sürücü ile ilgilifarkli bir sey mi yapmak gerekiyor?
2.4'te calisan eject komutunu verdigimde de $öyle
bir hata ile karsilasiyorum:
$ eject -v
eject: using default device `cdrom'
eject: device name is `cdrom'
eject: expanded name is `/cdrom'
eject: `/cdrom' is not mounted
eject: `/dev/cdrom' can be mounted at `/cdrom'
eject: `/dev/cdrom' is not a multipartition device
eject: trying to eject `/dev/cdrom' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/cdrom' using SCSI commands
eject: SCSI eject failed
eject: trying to eject `/dev/cdrom' using floppy eject command
eject: floppy eject command failed
eject: trying to eject `/dev/cdrom' using tape offline command
eject: tape offline command failed
eject: unable to eject, last error: Invalid argument
ve dmesg de $una benzer ciktilar veriyor:
ide-scsi: unsup command: dev hdb: flags = REQ_RW REQ_NOMERGE REQ_STARTED REQ_BLOCK_PC
sector 34596377, nr/cnr 8/8
bio 00000000, biotail 00000000, buffer 00000000, data 00000000, len 0
cdb: 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
ide-scsi: unsup command: dev hdb: flags = REQ_RW REQ_NOMERGE REQ_STARTED REQ_BLOCK_PC
sector 39839881, nr/cnr 8/8
bio 00000000, biotail 00000000, buffer 00000000, data 00000000, len 0
cdb: 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
-----Original Message-----
From: Emre Sevinc [mailto:emres@bilgi.edu.tr]
Sent: Sat 7/30/2005 9:55 PM
To: Erçin EKER; debian-user-turkish@lists.debian.org
Subject: RE: kernel 2.6'da cdrom sürücü ile ilgilifarkli bir sey mi yapmak gerekiyor?
-----Original Message-----
From: Erçin EKER [mailto:erc.caldera@gmx.net]
Sent: Sat 7/30/2005 9:32 PM
To: debian-user-turkish@lists.debian.org
Subject: Re: kernel 2.6'da cdrom sürücü ile ilgilifarkli bir sey mi yapmak gerekiyor?
Cts, 2005-07-30 tarihinde 20:17 +0300 saatinde, Emre Sevinc yazdi:
>> 2.6'ya gectikten sonra ilk kez az önce bir CD takmam gerekti
>> CD okuyucuya ancak önce müzik CD'sini dinlemeye kalkip nodisc
>> mesaji alinca bu sefer de bir data CD takip mount edeyim dedim
>> ilk denedigim mount komutu "Segmentation fault" verdi, ardindan
>> CD'yi cikarip tekrar taktim tekrar
>>
>> mount /cdrom
>>
>> denedim bu sefer de komut satirina düsmedi, öylece beklemeye
>> basladi, kill kullanarak iptal edemedim, kill -9 ile de iptal
>> olmuyor. CD'yi dügmesine basip tekrar cikarabildim, takip yeniden
>> mount etmeyi denedim yine ayni sekilde takildi, havada asili
>> duran iki mount süreci var ve kill -9 da bir ise yaramiyor.
>Yukaridaki durumlarda "dmesg"da çikan herhangi bir mesaj var mi?
dmesg ciktisi (ardindan da xcdroast ciktisi):
Linux version 2.6.11-1-686 (dannf@firetheft) (gcc version 3.3.6 (Debian 1:3.3.6-6)) #1 Mon Jun 20 22:00:38 MDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f6b60
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=302
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01401000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 997.883 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511420k/524224k available (1629k kernel code, 12248k reserved, 716k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(TM) CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e20)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4588k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI0 USB0 USB1 MODM UAR1 UAR2 ECP1
ACPI: (supports S0 S1 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4588KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.10 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 2F030J0, ATA DISK drive
hdb: DVD-ROM OEM316B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
ext3: No journal on filesystem on hda2
Adding 498004k swap on /dev/hda3. Priority:-1 extents:1
Generic RTC Driver v1.07
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ALC38 (ALC100P)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xDC00, IRQ 10
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: DVD-16X Model: OEM316B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: CD-RW GCE-8525B Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
Capability LSM initialized
sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS volume version 3.0.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
input: PS/2 Generic Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 5, io base 0xd400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: irq 5, io base 0xd800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:00:0e.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xe800, 00:e0:4c:e4:56:75, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0320820(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ide-scsi: unsup command: dev hdb: flags = REQ_CMD REQ_STARTED
sector 64, nr/cnr 2/2
bio dfda76e0, biotail dfda76e0, buffer c0a58000, data 00000000, len 0
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=32
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c01b2e06
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: isofs snd_mixer_oss nvidia ipv6 binfmt_misc af_packet 8139too 8139cp mii snd_via82xx snd_ac97_codec snd_pcm s
nd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd via686a i2c_sensor i2c_viapro i2c_core uhci_hcd
pci_hotplug via_agp agpgart tsdev mousedev psmouse parport_pc parport floppy pcspkr evdev nls_cp437 ntfs dm_mod capability sr_mo
d cdrom commoncap ide_scsi sg usb_storage usbcore via82cxxx_audio uart401 sound soundcore ac97_codec ac97 genrtc ext2 ext3 jbd m
bcache ide_disk ide_generic via82cxxx trm290 triflex slc90e66 sis5513 siimage serverworks sc1200 rz1000 piix pdc202xx_old opti62
1 ns87415 hpt366 hpt34x generic cy82c693 cs5530 cs5520 cmd64x atiixp amd74xx alim15x3 aec62xx pdc202xx_new ide_core sd_mod ata_p
iix libata scsi_mod unix fbcon font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[<c01b2e06>] Tainted: P VLI
EFLAGS: 00010246 (2.6.11-1-686)
EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: dfd85090
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cb703dd0
ds: 007b es: 007b ss: 0068
Process mount (pid: 21703, threadinfo=cb702000 task=cec06530)
Stack: d9e48200 c14df6c0 ffffffea dfd85090 c01b2e9f dfd85090 00000020 d80ccd54
00000010 d9e48200 c14df6c0 ffffffea 00000000 c01b38d8 dfd85090 000000d0
00000064 fffffffd fffffff4 d9e48200 c14df6c0 ffffffea e0d0cbc0 c01b39e8
Call Trace:
[<c01b2e9f>] kobject_get_path+0x1f/0x80
[<c01b38d8>] do_kobject_uevent+0x28/0x110
[<c01b39e8>] kobject_uevent+0x28/0x30
[<c0157c7e>] bdev_uevent+0x2e/0x50
[<c0157e16>] kill_block_super+0x26/0x60
[<c01572e8>] deactivate_super+0x48/0x70
[<c0157dc1>] get_sb_bdev+0x121/0x150
[<e0d07060>] isofs_get_sb+0x30/0x40 [isofs]
[<e0d05cb0>] isofs_fill_super+0x0/0x6d0 [isofs]
[<c0158050>] do_kern_mount+0xa0/0x170
[<c016d087>] do_new_mount+0x77/0xc0
[<c016d6d4>] do_mount+0x174/0x1c0
[<c016d503>] copy_mount_options+0x63/0xc0
[<c016da8a>] sys_mount+0x9a/0xe0
[<c0102f33>] syscall_call+0x7/0xb
Code: 90 8d 74 26 00 55 bd ff ff ff ff 57 56 be 01 00 00 00 53 8b 54 24 14 31 db 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 3a 89 e9
89 d8 <f2> ae f7 d1 49 8b 52 24 8d 74 31 01 85 d2 75 ea 5b 89 f0 5e 5f
xcdroast ciktisi (error writing tracks dedikten sonra):
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= "1,0,0" gracetime=2 fs=4096k -v driveropts=burnfree speed=0 -dao -eject -pad -waiti tsize=185s -
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
cdrecord: Warning: Running on Linux-2.6.11-1-686
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
cdrecord: There are unsettled issues with Linux-2.5 and newer.
and thus may have bugs that are not present in the original version.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
scsidev: '1,0,0'
The original author should not be bothered with problems of this version.
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.32
TOC Type: 1 = CD-ROM
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Waiting for data on stdin...
SCSI buffer size: 64512
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Cannot allocate memory. Cannot get SCSI I/O buffer.
Driveropts: 'burnfree'