Debian Sorunları #3
Merhaba,
Tüm çabalarıma rağmen çözemediğim problemlere sahibim. Şöyle ki:
1) Samba'yla ilgili paketleri kurdum:
tunix@tunix:~$ dpkg -l | grep samba
ii gnosamba 0.3.3-2 A graphical configuration utility for
Samba
ii samba 3.0.10-1 a LanManager-like file and printer
server fo
ii samba-common 3.0.10-1 Samba common files used by both the
server a
tunix@tunix:~$ dpkg -l | grep smb
ii libsmbclient 3.0.10-1 shared library that allows
applications to t
ii smbclient 3.0.10-1 a LanManager-like simple client for Unix
tunix@tunix:~$ dpkg -l | grep swat
ii swat 3.0.10-1 Samba Web Administration Tool
Debian'ın kendi aracıyla bir smb.conf dosyası oluşturdum, bilgisayarım
başarılı bir şekilde ağdan görülebiliyordu. Ancak az sonra anlatacağım
sıkıntılar üstüne SWAT ile baştan oluşturdum, Emre Kadıoğlu'ndan kendi
smb.conf dosyasını aldım ama yine de sorun devam ediyor. Samba'yla
ilgili 2 büyük sorunum var:
a) Linux'un bulunduğu disk bölümlemesinden paylaşım yaparsam, ağdaki
bilgisayarlardan bu paylaşıma girilebiliyor ama eğer FAT32 ile
formatlanmış ortak disk alanımdan (/mnt/tunix/Muzik - kendi kullanıcı
adımla mount etmişim ve sorunsuz kullanıyorum şu anda mesela) bir
paylaşım açarsam buraya ağdan hiçbir kullanıcı erişemiyor, böyle biryer
yok gibi bir mesaj veriyor. Farklı klasörleri paylaşmama rağmen aynı
şeyi söylüyor.
b) Ağdan görülüp girilebilen (Linux partition'daki) paylaşımlarımdan
dosya alındığında ya da ben birinden dosya almaya kalktığımda inanılmaz
derecede yavaş geliyor.
smb.conf dosyamı ve ifconfig çıktımı yolluyorum belki bir faydası dokunur:
tunix@tunix:~$ cat /etc/samba/smb.conf
# Samba config file created using SWAT
# from 127.0.0.1 (127.0.0.1)
# Date: 2005/01/09 16:58:58
# Global parameters
[global]
server string = Debian
security = SHARE
log file = /var/log/samba/log.%m
max log size = 50
dns proxy = No
[printers]
comment = All printers
path = /var/spool/samba
printable = Yes
browseable = No
[muzik]
comment = muzik
path = /mnt/tunix/Muzik
guest ok = Yes
[sozluk]
comment = Sozluk
path = /mnt/tunix/Sozluk
guest ok = Yes
-------------------------------
tunix@tunix:~$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:02:3F:21:68:27
inet addr:192.168.0.45 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::202:3fff:fe21:6827/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:18634 errors:0 dropped:0 overruns:0 frame:0
TX packets:5602 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11147395 (10.6 MiB) TX bytes:671969 (656.2 KiB)
Interrupt:10 Base address:0x7000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:808 errors:0 dropped:0 overruns:0 frame:0
TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:46000 (44.9 KiB) TX bytes:46000 (44.9 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:193.255.147.118 P-t-P:193.255.147.2
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:4309 errors:0 dropped:0 overruns:0 frame:0
TX packets:4363 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3230753 (3.0 MiB) TX bytes:405713 (396.2 KiB)
------------------------------
2) XCDRecord kullanıyorum. Sistemimde cdrecord'u SUID biti olmadan
kurdurmuştum. (öyle olması gerekiyor muydu emin değilim; hoş SUID
yaptığımda da olay değişmedi.) XCDRoast içerisinden CD yazdırmak
istediğimde şu hatayı alıyorum:
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4241N'
Revision : '0C29'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes:
Drive buf size : 1644048 = 1605 KB
cdrecord: Operation not permitted. prevent/allow medium removal: scsi
sendcmd: no error
CDB: 1E 00 00 00 01 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
cdrecord: Cannot init drive.
Current Secsize: 2048
Şimdi baktım, cdrom grubuna da dahilim... CD yazamıyorum şu anda hiçbir
şekilde... Burada denettiğim işlem CD-RW'nin içindekini sildirmekti bu
arada..
---------------
3) Tux Racer, Battle for Wesnoth oyunlarını kurdum. /dev/squencer
dosyası bulunamadığı gerekçesiyle oyunlardan ses alamıyorum. ln -s
/dev/audio (ya da dsp) /dev/squencer dediğimde de sonuç değişmedi. Ne
yapabilirim ? Zaten yakın bir zamanda kendi kernelimi derlemeyi düşünüyorum.
4) Hala fotoğraf makinemin Sony Memory Stick olan kartını laptopumun
kart okuyucusuna okutabilmiş değilim. :(
5) GNOME menülerinin, klasörlerin yapılan herhangi bir değişiklikte
kendini güncelleyebilmesini istiyorum. Her program yükleyişimde killall
-HUP gnome-panel demek ya da REFRESH çekmek hoş bir yöntem değil bence..
Hiç değilse açık kaynak işletim sistemi kullandığıma göre daha şık bir
çözüm yapılabilmeli bence... Diğer dağıtımlarda bu güncellemeler
otomatik olarak yapılabilirken neden GNOME içerisinde yapılamasın ki ?
Bu işi yapan bir paket falan mı ?
Yardımlarınız için teşekkür ederim.
--
Alper KANAT
http://raptiye.org
Reply to: