Re: /dev/sda artık yok hatta /dev altinda hic bisi yok :(
Serdar Bey,
>
> Öncelikle cevabınız için teşekkür ederim
>
> MAKEDEV i dediğiniz gibi yapıyordum fakat create diye çıktıları alıyorum
> ancak /dev altında hiç bir değişiklik olmuyor. yine aynı kalıyor
> ./MAKEDEV -v sda yapıyorum
> aldığım çıktı şu
> root@debian:/dev# ./MAKEDEV -v sda
> create sda b 8 0 root:disk 0660
> create sda1 b 8 1 root:disk 0660
> create sda2 b 8 2 root:disk 0660
> create sda3 b 8 3 root:disk 0660
> create sda4 b 8 4 root:disk 0660
> create sda5 b 8 5 root:disk 0660
> create sda6 b 8 6 root:disk 0660
> create sda7 b 8 7 root:disk 0660
> create sda8 b 8 8 root:disk 0660
> create sda9 b 8 9 root:disk 0660
> create sda10 b 8 10 root:disk 0660
> create sda11 b 8 11 root:disk 0660
> create sda12 b 8 12 root:disk 0660
> create sda13 b 8 13 root:disk 0660
> create sda14 b 8 14 root:disk 0660
> create sda15 b 8 15 root:disk 0660
>
>
> fakat ls ile baktığımda sda ile ilgili hiç bir aygıt bulunmuyor.
> root@debian:/dev# ls s*
> sndstat sr0 stderr stdin stdout
>
> shm:
>
> snd:
> controlC0 midiC0D0 pcmC0D0p pcmC0D2c timer
> hwC0D0 pcmC0D0c pcmC0D1c pcmC0D2p
>
> hiçbir şekilde sda aygıtını yaratmayı beceremedi loop aygıtı da yok aynı
> şekilde /dev altında
> ancak modprobe loop dediğim zaman loop aygıtları oluşuyor /dev dizini
> altında acaba bir modulü eksikliğimi var
>
> ups konusuna gelince apt ile kurabileceğim bütün ups programlarını
> denedim ups in cdsindeki programları da denedim fakat hiç birinde ups
> aygıtına erişemedim kablo sağlam bir sorun yok kabloda mesela powstatd
> -t dediğim zaman sadece fail çıktısı alabiliyorum upsin cdsinden çıkan
> programda da aynı şekilde bir yanlışlık var bilgisayarımda ama bir türlü
> bulamıyorum ne olduğunu.
> devfsd yi kullanmayi deneyim dedim o da başlarken şu hatayı veriyor
>
> Creating extra device nodes...done.
> Started device management daemon v1.3.25 for /dev
> error loading: "devfsd-se.so" /lib/devfsd/devfsd-se.so: symbol errno,
> version GLIBC_2.0 not defined in file libc.so.6 with link time reference
>
> google da arattım bu hatayı fakat alakasız sonuçlarda karşılaştım.
>
> bu arada kernel-2.6.9-1-k7 kullaniyorum artık kerneli de güncelledim
> bilgisayarda ne sorun var bir türlü bulamıyorum. Ne yapmam lazım
>
> lsmod çıktım
> lsmod
> Module Size Used by
> ipv6 261568 6
> binfmt_misc 11592 1
> thermal 13128 0
> fan 3908 0
> button 6544 0
> processor 17384 1 thermal
> ac 4740 0
> battery 9284 0
> ipt_ttl 1792 0
> ipt_TCPMSS 4288 0
> ip_nat_irc 4464 0
> ip_nat_ftp 5104 0
> ipt_limit 2368 0
> ipt_state 1856 4
> iptable_filter 2880 1
> iptable_mangle 2752 0
> ipt_LOG 7040 8
> ipt_MASQUERADE 3776 1
> ipt_TOS 2368 0
> ipt_REDIRECT 1984 0
> iptable_nat 26696 5
> ip_nat_irc,ip_nat_ftp,ipt_MASQUERADE,ipt_REDIRECT
> ipt_REJECT 6976 1
> ip_tables 18368 12
> ipt_ttl,ipt_TCPMSS,ipt_limit,ipt_state,iptable_filter,iptable_mangle,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REDIRECT,iptable_nat,ipt_REJECT
> ip_conntrack_irc 71792 1 ip_nat_irc
> ip_conntrack_ftp 72688 1 ip_nat_ftp
> ip_conntrack 47508 7
> ip_nat_irc,ip_nat_ftp,ipt_state,ipt_MASQUERADE,iptable_nat,ip_conntrack_irc,ip_conntrack_ftp
> af_packet 22536 4
> emu10k1_gp 3648 0
> gameport 4544 1 emu10k1_gp
> snd_emu10k1 98504 1
> snd_rawmidi 25060 1 snd_emu10k1
> snd_seq_device 8072 2 snd_emu10k1,snd_rawmidi
> snd_ac97_codec 72208 1 snd_emu10k1
> snd_util_mem 4480 1 snd_emu10k1
> snd_hwdep 9476 1 snd_emu10k1
> tulip 46752 0
> snd_bt87x 13256 0
> snd_pcm_oss 53480 0
> snd_mixer_oss 19968 1 snd_pcm_oss
> snd_pcm 97608 3 snd_emu10k1,snd_bt87x,snd_pcm_oss
> snd_timer 25604 1 snd_pcm
> snd 57188 12
> snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_hwdep,snd_bt87x,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> soundcore 10272 1 snd
> snd_page_alloc 9928 3 snd_emu10k1,snd_bt87x,snd_pcm
> bt878 11636 0
> tuner 20580 0
> bttv 155788 1 bt878
> video_buf 22020 1 bttv
> firmware_class 10368 1 bttv
> i2c_algo_bit 9928 1 bttv
> v4l2_common 6016 1 bttv
> btcx_risc 4616 1 bttv
> i2c_core 24016 3 tuner,bttv,i2c_algo_bit
> videodev 9920 1 bttv
> shpchp 100644 0
> pciehp 97188 0
> pci_hotplug 34160 2 shpchp,pciehp
> tsdev 7616 0
> mousedev 11480 1
> joydev 9792 0
> ohci_hcd 21124 0
> nvidia_agp 7708 1
> parport_pc 35648 0
> parport 41416 1 parport_pc
> floppy 60176 0
> pcspkr 3560 0
> rtc 12664 0
> evdev 9472 0
> ehci_hcd 31428 0
> dmfe 21020 0
> crc32 4224 2 tulip,dmfe
> nvnet 70308 0
> agpgart 34472 1 nvidia_agp
> nls_iso8859_1 3968 1
> nls_cp437 5632 1
> capability 4488 0
> commoncap 7040 1 capability
> sr_mod 17444 0
> usbmouse 5568 0
> usbhid 32320 0
> usbcore 118564 6 ohci_hcd,ehci_hcd,usbmouse,usbhid
> sd_mod 17808 0
> ide_cd 42464 0
> cdrom 40540 2 sr_mod,ide_cd
> ide_scsi 17220 0
> scsi_mod 125132 3 sr_mod,sd_mod,ide_scsi
> isofs 37688 0
> vfat 14528 1
> fat 46560 1 vfat
> ext2 70568 0
> ext3 125672 2
> jbd 63256 1 ext3
> mbcache 9092 2 ext2,ext3
> ide_generic 1344 0
> ide_disk 20480 6
> amd74xx 14044 1
> ide_core 141936 5
> ide_cd,ide_scsi,ide_generic,ide_disk,amd74xx
> unix 28468 446
> fbcon 40064 0
> font 8256 1 fbcon
> vesafb 6688 0
> cfbcopyarea 3904 1 vesafb
> cfbimgblt 2944 1 vesafb
> cfbfillrect 3520 1 vesafb
>
>
> dmesg
>
> Sun Oct 31 03:14:07 EST 2004
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data)
> BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> 127MB HIGHMEM available.
> 896MB LOWMEM available.
> On node 0 totalpages: 262096
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 225280 pages, LIFO batch:16
> HighMem zone: 32720 pages, LIFO batch:7
> DMI 2.3 present.
> ACPI: RSDP (v000 ACPIAM ) @ 0x000f97a0
> ACPI: RSDT (v001 A M I OEMRSDT 0x10000321 MSFT 0x00000097) @
> 0x3ffd0000
> ACPI: FADT (v002 A M I OEMFACP 0x10000321 MSFT 0x00000097) @
> 0x3ffd0200
> ACPI: MADT (v001 A M I OEMAPIC 0x10000321 MSFT 0x00000097) @
> 0x3ffd0390
> ACPI: OEMB (v001 A M I OEMBIOS 0x10000321 MSFT 0x00000097) @
> 0x3ffdf040
> ACPI: DSDT (v001 A7N8X A7N8X000 0x00000009 INTL 0x02002026) @
> 0x00000000
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:8 APIC version 16
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> ACPI: IRQ9 used by override.
> ACPI: IRQ14 used by override.
> ACPI: IRQ15 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Built 1 zonelists
> Kernel command line: root=/dev/hda1 ro
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 65536 bytes)
> Detected 2079.725 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1031200k/1048384k available (1578k kernel code, 16440k reserved,
> 711k data, 156k init, 130880k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> Calibrating delay loop... 4120.57 BogoMIPS (lpj=2060288)
> Security Scaffold v1.0.0 initialized
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
> CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) XP 2600+ stepping 01
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 pin1=0 pin2=-1
> checking if image is initramfs...it isn't (ungzip failed); looks like an
> initrd
> Freeing initrd memory: 4692k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040816
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *3
> ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *11
> ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *10
> ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *11
> ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
> ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *3
> ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
> ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3
> ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
> ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
> ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
> ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
> ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled.
> ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
> ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00f4360
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x4fca, dseg 0xf0000
> PnPBIOS: Missing SMALL_TAG_ENDDEP tag
> PnPBIOS: Missing SMALL_TAG_ENDDEP tag
> PnPBIOS: Missing SMALL_TAG_ENDDEP tag
> PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
> PCI: Using ACPI for IRQ routing
> ACPI: PCI Interrupt Link [LKSM] BIOS reported IRQ 22, using IRQ 23
> ACPI: PCI Interrupt Link [LKSM] enabled at IRQ 23
> ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 177
> ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
> ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 185
> ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
> ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 193
> ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
> ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 201
> ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
> ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 185
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
> ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 209
> ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 16 (level, high) -> IRQ 209
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
> ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 217
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
> ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 225
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
> ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 18 (level, high) -> IRQ 225
> pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
> pnp: 00:0a: ioport range 0x480-0x4ff could not be reserved
> highmem bounce pool size: 64 pages
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> Initializing Cryptographic API
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing
> enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> input: AT Translated Set 2 keyboard on isa0060/serio0
> NET: Registered protocol family 2
> IP: routing cache hash table of 8192 buckets, 64Kbytes
> TCP: Hash tables configured (established 262144 bind 65536)
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI wakeup devices:
> PCI0 PS2K UAR1 MAC USB0 USB1 USB2 FWR PCI1
> RAMDISK: cramfs filesystem found at block 0
> RAMDISK: Loading 4692KiB [1 disk] into ram disk...
> |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 156k freed
> vesafb: probe of vesafb0 failed with error -6
> NET: Registered protocol family 1
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> NFORCE2: IDE controller at PCI slot 0000:00:09.0
> NFORCE2: chipset revision 162
> NFORCE2: not 100% native mode: will probe irqs later
> NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
> NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> hda: ST340014A, ATA DISK drive
> hdb: ST3120022A, ATA DISK drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 1024KiB
> hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63,
> UDMA(100)
> hda: cache flushes supported
> /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
> hdb: max request size: 1024KiB
> hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63,
> UDMA(100)
> hdb: cache flushes supported
> /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
> Probing IDE interface ide1...
> hdc: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> Adding 505996k swap on /dev/hda5. Priority:-1 extents:1
> EXT3 FS on hda1, internal journal
> SCSI subsystem initialized
> ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
> as device
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: ASUS Model: CRW-5224A Rev: 1.40
> Type: CD-ROM ANSI SCSI revision: 02
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> usbcore: registered new driver usbmouse
> drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
> sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Capability LSM initialized
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hdb1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Linux agpgart interface v0.100 (c) Dave Jones
> nvnet: module license 'NVIDIA' taints kernel.
> ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
> ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 217
> eth1: Davicom DM9102 at pci0000:01:07.0, 00:08:a1:4c:28:09, irq 217.
> ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 201
> ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
> PCI: Setting latency timer of device 0000:00:02.2 to 64
> ehci_hcd 0000:00:02.2: irq 201, pci mem f8894000
> ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
> PCI: cache line size of 64 is not supported by device 0000:00:02.2
> ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> Real Time Clock Driver v1.12
> input: PC Speaker
> inserting floppy driver for 2.6.9-1-k7
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> parport0: Printer, Canon BJC-2000
> agpgart: Detected NVIDIA nForce2 chipset
> agpgart: Maximum main memory to use for agp memory: 941M
> agpgart: AGP aperture is 64M @ 0xf8000000
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 185
> ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ohci_hcd 0000:00:02.0: irq 185, pci mem f898e000
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 193
> ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
> PCI: Setting latency timer of device 0000:00:02.1 to 64
> ohci_hcd 0000:00:02.1: irq 193, pci mem f89fa000
> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 3 ports detected
> usb 3-1: new low speed USB device using address 2
> input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical
> Desktop® 1.00] on usb-0000:00:02.1-1
> mice: PS/2 mouse device common for all mice
> ts: Compaq touchscreen protocol output
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> Linux video capture interface: v1.00
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 209
> bttv0: Bt878 (rev 2) at 0000:01:06.0, irq: 209, latency: 64, mmio:
> 0xf0600000
> bttv0: detected: FlyVideo 98 (LR50)/ Chronos Video Shuttle II [card=35],
> PCI subsystem ID is 1851:1850
> bttv0: using: Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II
> [card=35,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=0084ff00 [init]
> bttv0: FlyVideo Radio=no RemoteControl=yes Tuner=5 gpio=0x84ff00
> bttv0: FlyVideo LR90=no tda9821/tda9820=no capture_only=no
> bttv0: using tuner=5
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tuner: Ignoring new-style parameters in presence of obsolete ones
> tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
> tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878
> #0 [sw]
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 16 (level, high) -> IRQ 209
> bt878(0): Bt878 (rev 2) at 01:06.1, irq: 209, latency: 64, memory:
> 0xf0700000
> Linux Tulip driver version 1.1.13 (May 11, 2002)
> ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 225
> gameport: pci0000:01:08.1 speed 864 kHz
> NET: Registered protocol family 17
> ip_conntrack version 2.1 (8190 buckets, 65520 max) - 332 bytes per
> conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> IN=eth1 OUT= MAC=00:08:a1:4c:28:09:00:11:5d:0c:88:70:08:00
> SRC=195.174.112.136 DST=195.174.34.201 LEN=48 TOS=0x00 PREC=0x00 TTL=123
> ID=56507 DF PROTO=TCP SPT=1227 DPT=135 WINDOW=64240 RES=0x00 SYN URGP=0
> On Sun, 2004-11-07 at 21:34, Serdar Aytekin wrote:
> > Merhaba,
> >
> > /dev/ altindaki aygitlarin tekrar olusabilmesi icin MAKEDEV komutunu hangi
> > sekilde uyguladiniz bilemiyorum ama su sekilde bir denermisiniz;
> >
> > cd /dev/
> > ./MAKEDEV -v generic
> >
> > genel olarak kullanilan aygitlari sisteminize tekrar olusturur.
> >
> > Seri portdan UPS ile haberlesen bir programa ihtiyaciniz var sanirim, bu
> > isler icin cok tercih edilen "upsd" (UPS Monitor Program via serial
> > interface) yi kullanabilirsiniz. Depolarda deb paketide mevcut.
> >
> > Saygilarimla,
> > Serdar Aytekin
> >
> > > Merhaba,
> > >
> > > Debian testing 2.6.7-1-k7 kullaniyorum.
> > >
> > > bir iso image ini mount etmek istedim fakat /dev/loop aygiti bulunamadi
> > > hatasi aldim modprobe loop dedim
> > > bu sefer de
> > > mount: wrong fs type, bad option, bad superblock on /dev/loop0,
> > > or too many mounted file systems
> > > (could this be the IDE device where you in fact use
> > > ide-scsi so that sr0 or sda or so is needed?)
> > >
> > > hatası aldım /dev dizinin içine baktığımda eskiden bir ton şey varken
> > > artık hiç bir şey yok modprobe sd_mod ide-scsi ide-core scsi_mod
> > >
> > > yaptım gene bir sonuç alamadım hatta bunları /etc/modules dosyasının
> > > içine ekledim yine bir sonuç alamadım MAKEDEV yaptıktan sonra da bir
> > > şey değişmedi yeni kernele geçtim aynı sorun ne yapmam lazım
> > > geçenlerde bir güncellemede hotplug ve discover güncellendi sorun
> > > bunlardan kaynaklanabilir mi?
> > >
> > > bir de bilgisayarın seri portlarına erişemiyorum. bir ups aldım seri
> > > porttan bağlanan fakat seri portlara erişemiyorum. apt-get ile setserial
> > > paketini yükledim modules.conf dosyasında seri portlarla ilgili bölümü
> > > aynen modprobe.conf dosyasına kopyaladım fakat bir sonuç alamadım seri
> > > portlarla iletişim kuramıyorum.
> > > anakartım asus a7n8x-vm
> > > işlemci amd-athlon-xp 2600+
> > > ram 1GB kingston ddr 400
> > >
> > >
> > > seri portlarla iletişim kurabilmem için ve /dev altında aygıtların
> > > tekrar oluşması için ne yapmam lazım.
> > >
> > >
> > > Yardımlarınız için şimdiden teşekkürler.
> >
Reply to: