Re: restart

["Soydan T. Renkmen" <linux@simet.com.tr>]

Selam

lilo.conf dosyam asagidaki gibi
acpi=ht diye bir parametre yok. sarge rc1 i 3 makinaya kurdum
nedendir bilmiyorum ama sadece scsi diskli olan xeon makinada
yapiyor bunu. normal shutdown oluyor fakat restart diyince
takilip kaliyor.

iyi calismalar
Soydan T. Renkmen

---
# Generated by liloconfig

# This allows booting from any partition on disks with more than 1024
# cylinders.
lba32

# Specifies the boot device
boot=/dev/sda

# Specifies the device that should be mounted as root.
# If the special name CURRENT is used, the root device is set to the
# device on which the root file system is currently mounted. If the root
# has been changed with  -r , the respective device is used. If the
# variable ROOT is omitted, the root device setting contained in the
# kernel image is used. It can be changed with the rdev program.
root=/dev/sda1

# Enables map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the map
# smaller. Using COMPACT is especially recommended when booting from a
# floppy disk.
# compact

# Default menu for Debian. (Using the images from debian-bootscreen)
# from Philipp Wolfer <phil@newswriter.org>.
#bitmap=/boot/debian.bmp
#bmp-colors=1,,0,2,,0
#bmp-table=120p,173p,1,15,17
#bmp-timer=254p,432p,1,0,0

# Install the specified file as the new boot sector.
# LILO supports built in boot sectory, you only need
# to specify the type, choose one from 'text', 'menu' or 'bitmap'.
# new: install=bmp      old: install=/boot/boot-bmp.b
# new: install=text     old: install=/boot/boot-text.b
# new: install=menu     old: install=/boot/boot-menu.b or boot.b
# default: 'menu' is default, unless you have a bitmap= line
# Note: install=bmp must be used to see the bitmap menu.
# install=menu
#install=bmp

# Specifies the number of _tenths_ of a second LILO should
# wait before booting the first image.  LILO
# doesn't wait if DELAY is omitted or if DELAY is set to zero.
delay=20

# Prompt to use certaing image. If prompt is specified without timeout,
# boot will not take place unless you hit RETURN
#prompt
#timeout=50

# Specifies the location of the map file. If MAP is
# omitted, a file /boot/map is used.
map=/boot/map

# Specifies the VGA text mode that should be selected when
# booting. The following values are recognized (case is ignored):
#   NORMAL  select normal 80x25 text mode.
#   EXTENDED  select 80x50 text mode. The word EXTENDED can be
#     abbreviated to EXT.
#   ASK  stop and ask for user input (at boot time).
#   <number>  use the corresponding text mode. A list of available modes
#     can be obtained by booting with  vga=ask  and pressing [Enter].
vga=normal

# These images were automagically added. You may need to edit something.
default=linux

image=/vmlinuz
        label="linux"
        initrd=/initrd.img
        read-only

# If you have another OS on this machine (say DOS),
# you can boot if by uncommenting the following lines
# (Of course, change /dev/hda2 to wherever your DOS partition is.)
# other=/dev/hda2
#   label=dos
---

----- Original Message ----- 
From: "Halil Demirezen" <halild@bilmuh.ege.edu.tr>
To: "Soydan T. Renkmen" <linux@simet.com.tr>
Cc: <debian-user-turkish@lists.debian.org>
Sent: Tuesday, August 10, 2004 6:56 PM
Subject: Re: restart


> eger lilo.conf da acpi=ht var ise
> kaldirin. Sonra lilo ile aktif hale
> getirdikten sonra tekrar deneyin.
>
>
> On Tue, Aug 10, 2004 at 05:56:12PM +0300, Soydan T. Renkmen wrote:
> >
> > kernel versiyonu
> > 2.6.7-1-386
> >
> >
> > ----- Original Message ----- 
> > From: "Halil Demirezen" <halild@bilmuh.ege.edu.tr>
> > To: "Soydan T. Renkmen" <linux@simet.com.tr>
> > Sent: Tuesday, August 10, 2004 5:36 PM
> > Subject: Re: restart
> >
> >
> > > Kernel versiyonu?
> > >
> > > On Tue, Aug 10, 2004 at 04:22:18PM +0300, Soydan T. Renkmen wrote:
> > > > Selam,
> > > >
> > > > Sarge rc1 kurulu bir sistemim var
> > > > makinayi komut ile kapatmaya calistigimda
> > > > sorunsuz kapaniyor ancak restart etmek istedigimde
> > > > nedense restart olmuyor. Servisler filan duruyor
> > > > en son asagidaki satirlari yazip kaliyor. Bu konuda
> > > > fikri olan var mi ? Neden olabilrki boyle bisey.
> > > >
> > > >
> > > > iyi calismalar
> > > > Soydan T. Renkmen
> > > >
> > > > --
> > > > Deactivating Swap...done.
> > > > Unmounting local filesystems...done.
> > > > Rebooting... Synchronizing SCSI cache for disk sdb:
> > > > Synchronizing SCSI cache for disk sda:
> > > > Restarting system.
> > > >
> > > >
> > > > -- 
> > > > To UNSUBSCRIBE, email to
debian-user-turkish-REQUEST@lists.debian.org
> > > > with a subject of "unsubscribe". Trouble? Contact
> > listmaster@lists.debian.org
> > >
> > >
> >
>
>
> -- 
> To UNSUBSCRIBE, email to debian-user-turkish-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>