Mplayer hänger sig på "init-alsa"
Jag kan inte spela upp film med alsa verkar det som, den hänger sig på
init-alsa hela tiden. Jag har testad med -ao esd men då får jag bad CPU
Usage... Kan man köra över kollen för cpu usage? Jag har fått igång -ao
esd vid något tillfälle. Skickar nedan med vad som händer då jag
försöker. Jag kör Mplayer Nogui på Ubuntu Hoary, jag har även försökt
med egen byggd Mplayer från CVS och den installerar bra men jag får
samma fel, körde in Ubuntus egen igen för den borde ju funka bäst med
min installation tycker jag. Min maskin är en 1,6ghz Notebook med 512mb
internminne från Fujitsu/Siemens, en S6120D. Ubuntu går som tåget i
övrigt, har aldrig haft bättre linux på den, Suse 9.3 var skit mot
Ubuntu. Hoppas jag kan ställa denna fråga här, har sett att ni
diskuterar Ubuntu ibland, det är Debian i grunden som alla vet.
Först som vanligt :
niklas@ubuntu:~$ mplayer
/home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.avi
MPlayer 1.0pre6-3.3.5 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for Debian.
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing /home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.avi.
AVI file format detected.
VIDEO: [XVID] 608x256 12bpp 23.976 fps 1114.3 kbps (136.0 kbyte/s)
Clip info:
Software: Nandub v1.0rc2
SUB: Detected subtitle file format: subviewer
SUB: Read 865 subtitles.
SUB: Adjusted 3 subtitle(s).
SUB: added subtitle file (1):
/home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.srt
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [liba52] AC3 decoding with liba52
AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 56000->192000 (448.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local
display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: default
-- --
Här ställer den sig hur länge som helst, när jag avbryter med CTRL+C så
får jag :
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 2 in module: ao2_init
-- --
... och sedan med försök till -ao esd
niklas@ubuntu:~$ mplayer -ao esd
/home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.avi
MPlayer 1.0pre6-3.3.5 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for Debian.
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing /home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.avi.
AVI file format detected.
VIDEO: [XVID] 608x256 12bpp 23.976 fps 1114.3 kbps (136.0 kbyte/s)
Clip info:
Software: Nandub v1.0rc2
SUB: Detected subtitle file format: subviewer
SUB: Read 865 subtitles.
SUB: Adjusted 3 subtitle(s).
SUB: added subtitle file (1):
/home/niklas/MyMovies/aquatic/The.Life.Aquatic.cd1.srt
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [liba52] AC3 decoding with liba52
AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 56000->192000 (448.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local
display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
[AO ESD] latency: [server: 0.28s, net: 0.00s] (adjust 0.28s)
AO: [esd] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
MPlayer interrupted by signal 11 in module: decode_audio
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in
DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We
can't and
won't help unless you provide this information when reporting a
possible bug.
niklas@ubuntu:~$
-- --
Jahapp hoppas någon känner igen detta.
niklas adolfsson, Linköping
--
Reply to: