Re: Compilar módulo con DKMS
Buenas,
Al final lo he hecho asi:
apt-get install linux-headers-`uname -r` linux-source-4.9
cd /usr/src/
tar -xJf linux-source-4.9.tar.xz
wget https://github.com/fetzerch/hp-n54l-drivers/raw/master/i2c-piix4.c
cp i2c-piix4.c linux-source-4.9/drivers/i2c/busses/i2c-piix4.c
cd linux-source-4.9/
cp /boot/config-`uname -r` .config
cp ../linux-headers-`uname -r`/Module.symvers .
make oldconfig
make prepare
make scripts
make modules SUBDIRS=drivers/i2c/busses/
cp /lib/modules/4.9.0-4-amd64/kernel/drivers/i2c/busses/i2c-piix4.ko
/lib/modules/4.9.0-4-amd64/kernel/drivers/i2c/busses/i2c-piix4.ko.bak
cp drivers/i2c/busses/i2c-piix4.ko
/lib/modules/4.9.0-4-amd64/kernel/drivers/i2c/busses/
depmod -a
Un saludo.
2017-12-27 0:54 GMT+01:00 rv riveravaldez <riveravaldezmail@gmail.com>:
> On Sat, Dec 23, 2017 at 12:58 PM, Josu Lazkano <josu.lazkano@gmail.com> wrote:
>> Buenos dias,
>>
>> Estoy intentando compilar este módulo para mi servidor:
>> https://github.com/fetzerch/hp-n54l-drivers
>>
>> He seguido los pasos:
>>
>> # git clone git://github.com/fetzerch/hp-n54l-drivers.git
>> # mv hp-n54l-drivers/ /usr/src/
>> # dkms add -m hp-n54l -v drivers/
>>
>> Pero en este punto me falla:
>>
>> # dkms build -m hp-n54l -v drivers
>>
>> Kernel preparation unnecessary for this kernel. Skipping...
>>
>> Building module:
>> cleaning build area...(bad exit status: 2)
>> make -j2 KERNELRELEASE=4.9.0-4-amd64 KVER=4.9.0-4-amd64
>> src=/var/lib/dkms/hp-n54l/0.1.0/build...(bad exit status: 2)
>> Error! Bad return status for module build on kernel: 4.9.0-4-amd64 (x86_64)
>> Consult /var/lib/dkms/hp-n54l/drivers/build/make.log for more information.
>>
>> Aquí está el make.log: http://paste.debian.net/1002136/
>
> ¿Esto es correcto?
>
> /var/lib/dkms/hp-n54l/0.1.0/build/Makefile: No existe el fichero o el directorio
>
> Me refiero a si efectivamente existen o no el directorio y el fichero.
>
--
Josu Lazkano
Reply to: