[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Desaparecio eth0






2014-02-05 Ricardo Zúñiga <ceaerrepe@gmail.com>:
Ramses:

No aparece la interfaz

# ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:78 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4916 (4.8 KiB)  TX bytes:4916 (4.8 KiB)

wlan0     Link encap:Ethernet  HWaddr ac:81:12:80:13:82 
          inet addr:200.0.0.80  Bcast:200.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::ae81:12ff:fe80:1382/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:55106 errors:0 dropped:0 overruns:0 frame:708601
          TX packets:28439 errors:11 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:37762119 (36.0 MiB)  TX bytes:6245801 (5.9 MiB)
          Interrupt:17

Cristian, este es el resultado

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0 (r8169)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*", ATTR{address}=="b8:70:f4:27:2b:a9", ATTR{dev_id}=$

# PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1c.1/0000:05:00.0 (wl)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*", ATTR{address}=="ac:81:12:80:13:82", ATTR{dev_id}=$

# USB device 0x:0x (rtl8187)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*", ATTR{address}=="00:4f:78:00:25:62", ATTR{dev_id}=$




2014-02-05 Cristian Mitchell <mitchell69uk@gmail.com>:




2014-02-05 Ramses <ramses.sevilla@gmail.com>:

El 05/02/2014, a las 14:47, Ricardo Zúñiga <ceaerrepe@gmail.com> escribió:

Saludos lista, les comento lo que me paso:

Vaya sorpresa me eh dado esta mañana, Desaparecio la interfaz de red cableada eth0.

# dmesg | grep -i eth
[   18.761560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Quitandole la sentencia -i no arroja resultado, pero con lspci no la veo:
# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
05:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

Agregue la interfaz en /etc/network/interfaces, pero al querer levantarla

# /etc/init.d/networking restart
[....] Running /etc/init.d/networking restart is deprecated because it may not re-enable some inte[warns ... (warning).
[....] Reconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0"
Bind socket to interface: No such device
Failed to bring up eth0.
done.

No sé por donde mas seguir no se me ocurre nada.

Haz "ifconfig -a" y manda la salida.


Saludos,

Ramses

fijate en

/etc/udev/rules.d/70-persistent-net.rules

--
MrIX
Linux user number 412793.
http://counter.li.org/

las grandes obras,
las sueñan los santos locos,
las realizan los luchadores natos,
las aprovechan los felices cuerdo,
y las critican los inútiles crónicos,




--
Atte.
Ricardo G. Zúñiga Bauer
Analista programador
Sitio web: http://ceaerrepe.com.ar
User Linux: #455331


Imagino que habrás probado reiniciar la máquina... Pues es muy raro, busca en los logs syslog, messages, dmesg haber si encuentra algo relacionado con eth0, sino está, mirate haber si algún log se roto y esta zipeado.

Saludos.

Reply to: