[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Error RT3899STA kernel 2.6.36-1 Debian Lenny



Hola a todos,

compile el kernel 2.6.36-1 para Debian Lenny en un portátil Dell (no
recuerdo ahora el modelo), no me funciona el sniffer, me aparece este
error:

debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
insmod rt3593sta.ko
insmod: error inserting 'rt3593sta.ko': -1 Invalid module format

[  313.466309] rt3593sta: no symbol version for module_layout
[  338.731164] rt3593sta: no symbol version for module_layout
[  379.988236] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[  379.988241] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[  379.988513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  390.760086] eth0: no IPv6 routers present
[  437.463198] rt3593sta: no symbol version for module_layout

Con el kernel que viene por defecto con la Debian Lenny si me
funciona, estos son los pasos que realizo:

debian:/home/sergio# ifconfig eth0 192.168.250.5
debian:/home/sergio# cd Desktop
debian:/home/sergio/Desktop# cd Sigma_Sniffer-11n-Linux_v4_2_0
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0# cd
Ralink-Debian-Driver/
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver#
cd RT3800STA/
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
cp -r RT2860STA /etc/Wireless
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
insmod rt3593sta.ko
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
ifconfig ra0 up
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ra0       Ralink STA  ESSID:""  Nickname:"RT2860STA"
          Mode:Auto  Frequency=2.437 GHz  Bit Rate=1 Mb/s
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Link Quality=10/100  Signal level:0 dBm  Noise level:-93 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
iwconfig ra0 mode monitor
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
/etc/rc.local start
Starting Sigma Sniffer Service
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
ps
  PID TTY          TIME CMD
 3667 pts/1    00:00:00 bash
 3743 pts/1    00:00:00 ps
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA

Alguna sugerencia?

Gracias, un saludo.


Reply to: