Re: guardar archivos con acentos ¿problema con permisos o locales?
Hola Fabián y Camaleón,
Gracias por las respuestas. Primero, mi respuesta a la sugerencia de
Fabián, dmesg tira un chorro como este (el cual no me da ni una
pista).
Abajo la respuesta a la sugerencia de Camaleón (edité fstab)
germ@Galileo:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.8-2)
(ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP
Tue Jan 10 05:01:58 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64
root=UUID=9174390d-f5b8-405c-9d2e-692a2e8fd3a8 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] BIOS-e820: 000000007f680000 - 000000007f68e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f68e000 - 000000007f6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601 04/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f680000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f680000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f680000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 36c3a000 - 37615000
[ 0.000000] ACPI: RSDP 00000000000fbf30 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 000000007f680100 00064 (v01 A_M_I_ OEMXSDT
04001118 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007f680290 000F4 (v04 A_M_I_ OEMFACP
04001118 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007f6804a0 08D70 (v02 A1724 A1724000
00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007f68e000 00040
[ 0.000000] ACPI: APIC 000000007f680390 0006C (v02 A_M_I_ OEMAPIC
04001118 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007f680400 0003C (v01 A_M_I_ OEMMCFG
04001118 MSFT 00000097)
[ 0.000000] ACPI: ECDT 000000007f680440 00055 (v01 A_M_I_ OEMECDT
04001118 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007f68e040 00061 (v01 A_M_I_ AMI_OEM
04001118 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007f689210 00038 (v01 A_M_I_ OEMHPET
04001118 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007f68e0b0 02024 (v01 A_M_I_ GMCHSCI
04001118 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007f690ec0 00999 (v01 PmRef CpuPm4
00003000 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f680000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007f680000
[ 0.000000] NODE_DATA [000000007f67b000 - 000000007f67ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD ->
[ffff88007ce00000-ffff88007e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f680
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7079 pages used for memmap
[ 0.000000] DMA32 zone: 510681 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f700000 (gap:
7f700000:7f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007f400000 s80768
r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 514603
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64
root=UUID=9174390d-f5b8-405c-9d2e-692a2e8fd3a8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2039284k/2087424k available (3293k kernel code,
452k absent, 47688k reserved, 3426k data, 556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1498.271 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated
using timer frequency.. 2996.54 BogoMIPS (lpj=5993084)
[ 0.004020] pid_max: default: 32768 minimum: 301
[ 0.004167] Security Framework initialized
[ 0.008124] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010207] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011170] Mount-cache hash table entries: 256
[ 0.011520] Initializing cgroup subsys cpuacct
[ 0.011535] Initializing cgroup subsys memory
[ 0.011568] Initializing cgroup subsys devices
[ 0.011579] Initializing cgroup subsys freezer
[ 0.011585] Initializing cgroup subsys net_cls
[ 0.011591] Initializing cgroup subsys blkio
[ 0.011680] CPU: Physical Processor ID: 0
[ 0.011685] CPU: Processor Core ID: 0
[ 0.011690] mce: CPU supports 5 MCE banks
[ 0.011705] CPU0: Thermal monitoring enabled (TM2)
[ 0.011713] using mwait in idle threads.
[ 0.012484] ACPI: Core revision 20110623
[ 0.032213] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071912] CPU0: Intel(R) Atom(TM) CPU N550 @ 1.50GHz stepping 0a
[ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.072003] ... version: 3
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Disabled fast string operations
[ 0.160009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.160009] Measured 162 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.160009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.160075] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160429] #2
[ 0.160435] smpboot cpu 2: start_ip = 9a000
[ 0.008000] Disabled fast string operations
[ 0.248226] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248610] #3 Ok.
[ 0.248615] smpboot cpu 3: start_ip = 9a000
[ 0.008000] Disabled fast string operations
[ 0.336173] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336243] Brought up 4 CPUs
[ 0.336251] Total of 4 processors activated (11986.44 BogoMIPS).
[ 0.338351] devtmpfs: initialized
[ 0.344804] PM: Registering ACPI NVS region at 7f68e000 (270336 bytes)
[ 0.344804] print_constraints: dummy:
[ 0.344804] NET: Registered protocol family 16
[ 0.344925] ACPI: bus type pci registered
[ 0.345095] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.345103] PCI: not using MMCONFIG
[ 0.345108] PCI: Using configuration type 1 for base access
[ 0.346331] bio: create slab <bio-0> at 0
[ 0.346331] ACPI: Added _OSI(Module Device)
[ 0.346331] ACPI: Added _OSI(Processor Device)
[ 0.346331] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.348039] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.351723] ACPI: EC: EC description table is found, configuring boot EC
[ 0.355708] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.365174] ACPI: SSDT 000000007f6902f0 002E4 (v01 PmRef Cpu0Ist
00003000 INTL 20060113)
[ 0.366265] ACPI: Dynamic OEM Table Load:
[ 0.366274] ACPI: SSDT (null) 002E4 (v01 PmRef Cpu0Ist
00003000 INTL 20060113)
[ 0.366746] ACPI: SSDT 000000007f690790 00724 (v01 PmRef Cpu0Cst
00003001 INTL 20060113)
[ 0.368343] ACPI: Dynamic OEM Table Load:
[ 0.368352] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst
00003001 INTL 20060113)
[ 0.369203] ACPI: SSDT 000000007f690240 000AB (v01 PmRef Cpu1Ist
00003000 INTL 20060113)
[ 0.370162] ACPI: Dynamic OEM Table Load:
[ 0.370170] ACPI: SSDT (null) 000AB (v01 PmRef Cpu1Ist
00003000 INTL 20060113)
[ 0.370518] ACPI: SSDT 000000007f690700 00085 (v01 PmRef Cpu1Cst
00003000 INTL 20060113)
[ 0.371444] ACPI: Dynamic OEM Table Load:
[ 0.371452] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst
00003000 INTL 20060113)
[ 0.372332] ACPI: SSDT 000000007f690190 000AB (v01 PmRef Cpu2Ist
00003000 INTL 20060113)
[ 0.373294] ACPI: Dynamic OEM Table Load:
[ 0.373302] ACPI: SSDT (null) 000AB (v01 PmRef Cpu2Ist
00003000 INTL 20060113)
[ 0.373650] ACPI: SSDT 000000007f690670 00085 (v01 PmRef Cpu2Cst
00003000 INTL 20060113)
[ 0.374579] ACPI: Dynamic OEM Table Load:
[ 0.374587] ACPI: SSDT (null) 00085 (v01 PmRef Cpu2Cst
00003000 INTL 20060113)
[ 0.375434] ACPI: SSDT 000000007f6900e0 000AB (v01 PmRef Cpu3Ist
00003000 INTL 20060113)
[ 0.376415] ACPI: Dynamic OEM Table Load:
[ 0.376424] ACPI: SSDT (null) 000AB (v01 PmRef Cpu3Ist
00003000 INTL 20060113)
[ 0.376779] ACPI: SSDT 000000007f6905e0 00085 (v01 PmRef Cpu3Cst
00003000 INTL 20060113)
[ 0.377712] ACPI: Dynamic OEM Table Load:
[ 0.377720] ACPI: SSDT (null) 00085 (v01 PmRef Cpu3Cst
00003000 INTL 20060113)
[ 0.378317] ACPI: Interpreter enabled
[ 0.378328] ACPI: (supports S0 S3 S4 S5)
[ 0.378399] ACPI: Using IOAPIC for interrupt routing
[ 0.378478] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.380162] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.435418] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.438964] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.439482] ACPI: No dock devices found.
[ 0.439489] HEST: Table not found.
[ 0.439497] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.439741] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.440317] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.440326] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.440333] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.440340] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 0.440348] pci_root PNP0A08:00: host bridge window [mem
0x7f700000-0xfed8ffff]
[ 0.440379] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.440442] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.440460] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.440471] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.440482] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.440493] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
[ 0.440543] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.440558] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.440664] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.440690] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[ 0.440771] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.440781] pci 0000:00:1b.0: PME# disabled
[ 0.440819] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.440902] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.440911] pci 0000:00:1c.0: PME# disabled
[ 0.440950] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.441033] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.441041] pci 0000:00:1c.1: PME# disabled
[ 0.441081] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.441163] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.441172] pci 0000:00:1c.2: PME# disabled
[ 0.441214] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.441271] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.441323] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.441380] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.441430] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.441487] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.441541] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.441599] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.441662] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.441691] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
[ 0.441786] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.441795] pci 0000:00:1d.7: PME# disabled
[ 0.441829] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.441918] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.442069] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.442097] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.442112] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.442127] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.442141] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.442156] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f]
[ 0.442172] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
[ 0.442218] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.442227] pci 0000:00:1f.2: PME# disabled
[ 0.442259] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.442327] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.442432] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.442566] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 0.442600] pci 0000:02:00.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[ 0.442721] pci 0000:02:00.0: supports D1 D2
[ 0.442727] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.442737] pci 0000:02:00.0: PME# disabled
[ 0.448090] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.448102] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.448115] pci 0000:00:1c.1: bridge window [mem
0xf0000000-0xf6ffffff 64bit pref]
[ 0.448223] pci 0000:01:00.0: [1969:2062] type 0 class 0x000200
[ 0.448257] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.448277] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.448381] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448391] pci 0000:01:00.0: PME# disabled
[ 0.456057] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.456066] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.456076] pci 0000:00:1c.2: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.456170] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.456188] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.456196] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.456209] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.456218] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
[ 0.456226] pci 0000:00:1e.0: bridge window [mem
0x7f700000-0xfed8ffff] (subtractive decode)
[ 0.456262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.456667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.456792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.456869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.456965] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.456975] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 0.456981] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.477927] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.478105] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.478280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.478454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.478633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.478808] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.478984] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.479158] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.479411] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.479411] vgaarb: loaded
[ 0.479411] vgaarb: bridge control possible 0000:00:02.0
[ 0.479411] PCI: Using ACPI for IRQ routing
[ 0.486277] PCI: pci_cache_line_size set to 64 bytes
[ 0.486442] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.486450] reserve RAM buffer: 000000007f680000 - 000000007fffffff
[ 0.486750] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.486761] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.486773] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.500074] Switching to clocksource hpet
[ 0.503787] Switched to NOHz mode on CPU #0
[ 0.503901] Switched to NOHz mode on CPU #3
[ 0.503928] Switched to NOHz mode on CPU #1
[ 0.503939] Switched to NOHz mode on CPU #2
[ 0.505868] pnp: PnP ACPI init
[ 0.505912] ACPI: bus type pnp registered
[ 0.506200] pnp 00:00: [bus 00-ff]
[ 0.506209] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.506216] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.506223] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.506230] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.506237] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.506244] pnp 00:00: [mem 0x7f700000-0xfed8ffff window]
[ 0.506394] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 0.506431] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.506438] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.506562] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.506572] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.506581] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.506686] pnp 00:02: [dma 4]
[ 0.506693] pnp 00:02: [io 0x0000-0x000f]
[ 0.506699] pnp 00:02: [io 0x0081-0x0083]
[ 0.506705] pnp 00:02: [io 0x0087]
[ 0.506711] pnp 00:02: [io 0x0089-0x008b]
[ 0.506717] pnp 00:02: [io 0x008f]
[ 0.506723] pnp 00:02: [io 0x00c0-0x00df]
[ 0.506812] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.506853] pnp 00:03: [io 0x0070-0x0071]
[ 0.506877] pnp 00:03: [irq 8]
[ 0.506951] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.507058] pnp 00:04: [io 0x0060]
[ 0.507064] pnp 00:04: [io 0x0064]
[ 0.507079] pnp 00:04: [irq 1]
[ 0.507153] pnp 00:04: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 0.507264] pnp 00:05: [irq 12]
[ 0.507348] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13
SYN0a00 SYN0002 PNP0f13 (active)
[ 0.507383] pnp 00:06: [io 0x0061]
[ 0.507455] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.507489] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.507504] pnp 00:07: [irq 13]
[ 0.507583] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.507989] pnp 00:08: [io 0x0010-0x001f]
[ 0.508045] pnp 00:08: [io 0x0022-0x003f]
[ 0.508054] pnp 00:08: [io 0x0044-0x004d]
[ 0.508060] pnp 00:08: [io 0x0050-0x005e]
[ 0.508066] pnp 00:08: [io 0x0063]
[ 0.508072] pnp 00:08: [io 0x0065]
[ 0.508078] pnp 00:08: [io 0x0067-0x006f]
[ 0.508084] pnp 00:08: [io 0x0072-0x007f]
[ 0.508090] pnp 00:08: [io 0x0080]
[ 0.508096] pnp 00:08: [io 0x0084-0x0086]
[ 0.508102] pnp 00:08: [io 0x0088]
[ 0.508108] pnp 00:08: [io 0x008c-0x008e]
[ 0.508114] pnp 00:08: [io 0x0090-0x009f]
[ 0.508120] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.508127] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.508133] pnp 00:08: [io 0x025c-0x025f]
[ 0.508139] pnp 00:08: [io 0x0380-0x0383]
[ 0.508145] pnp 00:08: [io 0x0400-0x041f]
[ 0.508151] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.508158] pnp 00:08: [io 0x0800-0x087f]
[ 0.508164] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.508171] pnp 00:08: [io 0x0480-0x04bf]
[ 0.508178] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.508184] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.508191] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[ 0.508198] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.508204] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.508374] system 00:08: [io 0x025c-0x025f] has been reserved
[ 0.508384] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.508392] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.508400] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.508408] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.508417] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.508426] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.508435] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.508444] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.508453] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.508461] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.508471] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.508680] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.508760] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.508934] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.508942] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.509078] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.509088] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.509097] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.509220] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.509338] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.509348] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510069] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.510078] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.510085] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.510091] pnp 00:0c: [mem 0x00100000-0x7f6fffff]
[ 0.510098] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[ 0.510257] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.510267] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.510276] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.510285] system 00:0c: [mem 0x00100000-0x7f6fffff] could not be reserved
[ 0.510294] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.510303] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.510913] pnp: PnP ACPI: found 13 devices
[ 0.510919] ACPI: ACPI bus type pnp unregistered
[ 0.523343] PCI: max bus depth: 1 pci_try_num: 2
[ 0.523418] pci 0000:00:1c.2: BAR 15: assigned [mem
0x7f700000-0x7f8fffff 64bit pref]
[ 0.523431] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.523440] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f900000-0x7fafffff]
[ 0.523451] pci 0000:00:1c.0: BAR 15: assigned [mem
0x7fb00000-0x7fcfffff 64bit pref]
[ 0.523461] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.523469] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.523477] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.523487] pci 0000:00:1c.0: bridge window [mem 0x7f900000-0x7fafffff]
[ 0.523497] pci 0000:00:1c.0: bridge window [mem
0x7fb00000-0x7fcfffff 64bit pref]
[ 0.523509] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.523517] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.523527] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.523536] pci 0000:00:1c.1: bridge window [mem
0xf0000000-0xf6ffffff 64bit pref]
[ 0.523549] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.523556] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.523566] pci 0000:00:1c.2: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.523576] pci 0000:00:1c.2: bridge window [mem
0x7f700000-0x7f8fffff 64bit pref]
[ 0.523588] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.523614] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.523650] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.523661] pci 0000:00:1c.0: setting latency timer to 64
[ 0.523673] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.523702] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.523712] pci 0000:00:1c.1: setting latency timer to 64
[ 0.523736] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.523746] pci 0000:00:1c.2: setting latency timer to 64
[ 0.523759] pci 0000:00:1e.0: setting latency timer to 64
[ 0.523768] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.523775] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.523782] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.523789] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.523796] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.523803] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.523810] pci_bus 0000:04: resource 1 [mem 0x7f900000-0x7fafffff]
[ 0.523817] pci_bus 0000:04: resource 2 [mem 0x7fb00000-0x7fcfffff
64bit pref]
[ 0.523825] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.523831] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.523839] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff
64bit pref]
[ 0.523846] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.523853] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.523860] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff
64bit pref]
[ 0.523868] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.523874] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.523881] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.523888] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.523895] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.524133] NET: Registered protocol family 2
[ 0.524437] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.526186] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.529224] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.529908] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.529915] TCP reno registered
[ 0.529940] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.529990] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.530346] NET: Registered protocol family 1
[ 0.530392] pci 0000:00:02.0: Boot video device
[ 0.530596] PCI: CLS 32 bytes, default 64
[ 0.530730] Unpacking initramfs...
[ 1.117179] Freeing initrd memory: 10092k freed
[ 1.126411] audit: initializing netlink socket (disabled)
[ 1.126445] type=2000 audit(1328185273.120:1): initialized
[ 1.165042] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.180428] VFS: Disk quotas dquot_6.5.2
[ 1.180522] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.180714] msgmni has been set to 4002
[ 1.181232] alg: No test for stdrng (krng)
[ 1.181335] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.181345] io scheduler noop registered
[ 1.181350] io scheduler deadline registered
[ 1.181412] io scheduler cfq registered (default)
[ 1.181642] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.181714] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.181845] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.181908] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.182024] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.182085] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 1.182496] intel_idle: MWAIT substates: 0x20220
[ 1.182521] intel_idle: v0.4 model 0x1C
[ 1.182527] intel_idle: lapic_timer_reliable_states 0x2
[ 1.182668] ERST: Table is not found!
[ 1.182672] GHES: HEST is not enabled!
[ 1.182875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.361035] Linux agpgart interface v0.103
[ 1.361205] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.361339] agpgart-intel 0000:00:00.0: detected gtt size: 524288K
total, 262144K mappable
[ 1.361576] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.361908] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.362255] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 1.381090] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.381112] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.381527] mousedev: PS/2 mouse device common for all mice
[ 1.382420] rtc_cmos 00:03: RTC can wake from S4
[ 1.382665] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.382708] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.383156] cpuidle: using governor ladder
[ 1.383834] cpuidle: using governor menu
[ 1.384434] TCP cubic registered
[ 1.384636] NET: Registered protocol family 10
[ 1.385993] Mobile IPv6
[ 1.386002] NET: Registered protocol family 17
[ 1.386028] Registering the dns_resolver key type
[ 1.386476] PM: Hibernation image not present or could not be loaded.
[ 1.386513] registered taskstats version 1
[ 1.394497] rtc_cmos 00:03: setting system clock to 2012-02-02
12:21:14 UTC (1328185274)
[ 1.394620] Initializing network drop monitor service
[ 1.398312] Freeing unused kernel memory: 556k freed
[ 1.398578] Write protecting the kernel read-only data: 6144k
[ 1.409734] Freeing unused kernel memory: 784k freed
[ 1.416910] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.419976] Freeing unused kernel memory: 696k freed
[ 1.459311] udevd[59]: starting version 175
[ 1.572169] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.572181] ACPI: Thermal Zone [TZ00] (38 C)
[ 1.590852] atl1c 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.590887] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.613686] usbcore: registered new interface driver usbfs
[ 1.613769] usbcore: registered new interface driver hub
[ 1.621414] SCSI subsystem initialized
[ 1.625114] usbcore: registered new device driver usb
[ 1.627180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.627295] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.627348] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.627360] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.627483] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.627575] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.627601] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.631509] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.631586] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.632445] libata version 3.00 loaded.
[ 1.645181] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.645315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.645326] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.645335] usb usb1: Product: EHCI Host Controller
[ 1.645343] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.645351] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.645797] hub 1-0:1.0: USB hub found
[ 1.645819] hub 1-0:1.0: 8 ports detected
[ 1.646149] ahci 0000:00:1f.2: version 3.0
[ 1.646218] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.646326] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.646458] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0x1 impl SATA mode
[ 1.646474] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.646488] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.647898] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.648555] scsi0 : ahci
[ 1.649541] scsi1 : ahci
[ 1.649932] scsi2 : ahci
[ 1.650185] scsi3 : ahci
[ 1.651766] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port
0xf7cf7900 irq 43
[ 1.651777] ata2: DUMMY
[ 1.651784] ata3: DUMMY
[ 1.651791] ata4: DUMMY
[ 1.652553] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.652593] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.652605] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.652650] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.652726] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.652890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.652901] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.652911] usb usb2: Product: UHCI Host Controller
[ 1.652919] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
[ 1.652927] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.653451] hub 2-0:1.0: USB hub found
[ 1.653474] hub 2-0:1.0: 2 ports detected
[ 1.653837] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.653866] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.653878] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.653919] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.654027] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.654202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.654213] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.654223] usb usb3: Product: UHCI Host Controller
[ 1.654231] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
[ 1.654240] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.655631] hub 3-0:1.0: USB hub found
[ 1.655656] hub 3-0:1.0: 2 ports detected
[ 1.655976] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.656001] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.656057] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.656096] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.656201] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
[ 1.656335] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.656343] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.656349] usb usb4: Product: UHCI Host Controller
[ 1.656355] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
[ 1.656361] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.656737] hub 4-0:1.0: USB hub found
[ 1.656751] hub 4-0:1.0: 2 ports detected
[ 1.657044] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.657070] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.657081] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.657126] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.657240] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.657399] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.657410] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.657420] usb usb5: Product: UHCI Host Controller
[ 1.657428] usb usb5: Manufacturer: Linux 3.1.0-1-amd64 uhci_hcd
[ 1.657436] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.657897] hub 5-0:1.0: USB hub found
[ 1.657913] hub 5-0:1.0: 2 ports detected
[ 1.717466] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 1.976154] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.977314] ata1.00: unexpected _GTF length (8)
[ 2.016091] usb 1-6: new high speed USB device number 3 using ehci_hcd
[ 2.024651] ata1.00: ATA-8: ST9320325AS, 0003SDM1, max UDMA/133
[ 2.024660] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.026807] ata1.00: unexpected _GTF length (8)
[ 2.027155] ata1.00: configured for UDMA/133
[ 2.027477] scsi 0:0:0:0: Direct-Access ATA ST9320325AS
0003 PQ: 0 ANSI: 5
[ 2.042141] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks:
(320 GB/298 GiB)
[ 2.042449] sd 0:0:0:0: [sda] Write Protect is off
[ 2.042464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.042609] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.121947] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 2.123606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.071274] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[ 3.071283] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.071290] usb 1-6: Product: USB2.0 UVC VGA WebCam
[ 3.071296] usb 1-6: Manufacturer: Azurewave
[ 3.071301] usb 1-6: SerialNumber: 200901010001
[ 3.440114] usb 3-1: new low speed USB device number 2 using uhci_hcd
[ 3.609097] usb 3-1: New USB device found, idVendor=192f, idProduct=0416
[ 3.609107] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.609114] usb 3-1: Product: USB Optical Mouse
[ 3.636762] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1
[ 3.637155] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID
v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 3.637223] usbcore: registered new interface driver usbhid
[ 3.637231] usbhid: USB HID core driver
[ 3.790574] PM: Starting manual resume from disk
[ 3.790583] PM: Hibernation image partition 8:7 present
[ 3.790587] PM: Looking for hibernation image.
[ 3.808205] PM: Image not found (code -22)
[ 3.808211] PM: Hibernation image not present or could not be loaded.
[ 3.852110] usb 5-1: new full speed USB device number 2 using uhci_hcd
[ 3.855617] kjournald starting. Commit interval 5 seconds
[ 3.855672] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.028379] usb 5-1: New USB device found, idVendor=13d3, idProduct=3315
[ 4.028388] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.028396] usb 5-1: Product: Bluetooth module
[ 4.028401] usb 5-1: Manufacturer: Broadcom Corp
[ 4.028406] usb 5-1: SerialNumber: 74F06DC0F2ED
[ 5.744390] udevd[247]: starting version 175
[ 6.337847] ACPI: acpi_idle yielding to intel_idle
[ 6.342072] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.346957] ACPI: Lid Switch [LID]
[ 6.347236] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.347257] ACPI: Sleep Button [SLPB]
[ 6.347488] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 6.347505] ACPI: Power Button [PWRB]
[ 6.347757] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.347772] ACPI: Power Button [PWRF]
[ 6.390400] wmi: Mapper loaded
[ 6.486543] ACPI: Battery Slot [BAT0] (battery present)
[ 6.487089] ACPI: AC Adapter [AC0] (off-line)
[ 6.750571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.890649] iTCO_vendor_support: vendor-support=0
[ 6.890829] cfg80211: Calling CRDA to update world regulatory domain
[ 6.902787] asus_wmi: ASUS WMI generic driver loaded
[ 6.918884] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.919161] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 6.919419] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.958181] Linux media interface: v0.10
[ 6.965511] Linux video capture interface: v2.00
[ 6.974079] brcmutil: module is from the staging directory, the
quality is unknown, you have been warned.
[ 6.982903] asus_wmi: Initialization: 0x0
[ 6.983054] asus_wmi: BIOS WMI version: 0.6
[ 6.983315] asus_wmi: SFUN value: 0x0
[ 6.984706] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input6
[ 7.009878] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 7.029186] input: USB2.0 UVC VGA WebCam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input7
[ 7.029510] usbcore: registered new interface driver uvcvideo
[ 7.029519] USB Video Class driver (1.1.1)
[ 7.138615] brcmsmac: module is from the staging directory, the
quality is unknown, you have been warned.
[ 7.148587] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[ 7.148641] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.148653] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 7.163031] [drm] Initialized drm 1.1.0 20060810
[ 7.221394] Bluetooth: Core ver 2.16
[ 7.221507] NET: Registered protocol family 31
[ 7.221515] Bluetooth: HCI device and connection manager initialized
[ 7.221525] Bluetooth: HCI socket layer initialized
[ 7.221532] Bluetooth: L2CAP socket layer initialized
[ 7.222356] Bluetooth: SCO socket layer initialized
[ 7.326951] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.326963] i915 0000:00:02.0: setting latency timer to 64
[ 7.384731] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 7.384747] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.384753] [drm] Driver supports precise vblank timestamp query.
[ 7.384847] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.401779] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.627136] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1,
caps: 0xd04733/0xa40000/0xa0400
[ 7.658394] Intel AES-NI instructions are not detected.
[ 7.691187] [drm] initialized overlay support
[ 7.699046] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input8
[ 7.714959] fbcon: inteldrmfb (fb0) is primary device
[ 7.842540] padlock_aes: VIA PadLock not detected.
[ 8.212820] usbcore: registered new interface driver btusb
[ 8.214459] asus_wmi: Backlight controlled by ACPI video driver
[ 8.504243] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.760123] [drm:intel_lvds_enable] *ERROR* timed out waiting for
panel to power on
[ 8.775237] Console: switching to colour frame buffer device 170x48
[ 8.788857] fb0: inteldrmfb frame buffer device
[ 8.788862] drm: registered panic notifier
[ 8.800108] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[ 8.808656] acpi device:2c: registered as cooling_device4
[ 8.809035] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 8.809263] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.809468] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.809621] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 8.809774] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 8.809842] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.894875] hda_codec: ALC269VB: BIOS auto-probing.
[ 8.899200] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.899490] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.220070] Bluetooth: hci0 command tx timeout
[ 10.058867] Adding 4004860k swap on /dev/sda7. Priority:-1
extents:1 across:4004860k
[ 10.737234] EXT3-fs (sda1): using internal journal
[ 10.906323] loop: module loaded
[ 13.121052] asus_wmi: Unknown key 58 pressed
[ 14.666204] kjournald starting. Commit interval 5 seconds
[ 14.667008] EXT3-fs (sda9): using internal journal
[ 14.667019] EXT3-fs (sda9): mounted filesystem with ordered data mode
[ 14.801224] kjournald starting. Commit interval 5 seconds
[ 14.801856] EXT3-fs (sda8): using internal journal
[ 14.801866] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 14.921077] kjournald starting. Commit interval 5 seconds
[ 14.921578] EXT3-fs (sda5): using internal journal
[ 14.921589] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 15.321431] kjournald starting. Commit interval 5 seconds
[ 15.322023] EXT3-fs (sda6): using internal journal
[ 15.322033] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 17.530463] RPC: Registered named UNIX socket transport module.
[ 17.530473] RPC: Registered udp transport module.
[ 17.530479] RPC: Registered tcp transport module.
[ 17.530486] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.595021] FS-Cache: Loaded
[ 17.665442] FS-Cache: Netfs 'nfs' registered for caching
[ 17.702017] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.083679] fuse init (API version 7.17)
[ 22.262950] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 23.278951] Bluetooth: RFCOMM TTY layer initialized
[ 23.279491] Bluetooth: RFCOMM socket layer initialized
[ 23.279499] Bluetooth: RFCOMM ver 1.11
[ 23.327936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.327945] Bluetooth: BNEP filters: protocol multicast
[ 27.726085] ieee80211 phy0: brcms_ops_config: change monitor mode:
false (implement)
[ 27.730024] ieee80211 phy0: brcms_ops_config: change power-save
mode: false (implement)
[ 27.734590] ieee80211 phy0: brcms_ops_bss_info_changed: qos
enabled: false (implement)
[ 27.739384] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.751147] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 27.837896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.431486] lp: driver loaded but no devices found
[ 31.694629] ppdev: user-space parallel port driver
[ 144.346469] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps
Full Duplex>
[ 144.347593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 144.384400] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 145.987790] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps
Full Duplex>
[ 155.104071] eth0: no IPv6 routers present
[ 155.808071] ------------[ cut here ]------------
[ 155.808100] WARNING: at
/build/buildd-linux-2.6_3.1.8-2-amd64-XPJTbL/linux-2.6-3.1.8/debian/build/source_amd64_none/net/sched/sch_generic.c:255
dev_watchdog+0xe9/0x148()
[ 155.808108] Hardware name: 1215P
[ 155.808114] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
[ 155.808119] Modules linked in: parport_pc ppdev lp parport
acpi_cpufreq mperf cpufreq_userspace cpufreq_conservative
cpufreq_stats cpufreq_powersave bnep rfcomm binfmt_misc uinput fuse
nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc loop
snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi joydev snd_rawmidi
cryptd aes_x86_64 snd_seq_midi_event snd_seq aes_generic ecb snd_timer
snd_seq_device btusb i915 drm_kms_helper snd bluetooth drm brcmsmac(C)
mac80211 i2c_algo_bit uvcvideo eeepc_wmi brcmutil(C) videodev media
v4l2_compat_ioctl32 soundcore iTCO_wdt crc16 asus_wmi
iTCO_vendor_support cfg80211 snd_page_alloc i2c_core sparse_keymap
pci_hotplug rfkill evdev psmouse serio_raw ac battery power_supply wmi
button processor video ext3 jbd mbcache usbhid hid sd_mod crc_t10dif
uhci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore atl1c thermal
thermal_sys [last unloaded: scsi_wait_scan]
[ 155.808303] Pid: 0, comm: kworker/0:1 Tainted: G C 3.1.0-1-amd64 #1
[ 155.808309] Call Trace:
[ 155.808313] <IRQ> [<ffffffff81045791>] ? warn_slowpath_common+0x78/0x8c
[ 155.808332] [<ffffffff8104583d>] ? warn_slowpath_fmt+0x45/0x4a
[ 155.808341] [<ffffffff8128803d>] ? netif_tx_lock+0x40/0x72
[ 155.808361] [<ffffffff8128819e>] ? dev_watchdog+0xe9/0x148
[ 155.808371] [<ffffffff8105189c>] ? run_timer_softirq+0x19a/0x261
[ 155.808380] [<ffffffff8106a95d>] ? tick_handle_oneshot_broadcast+0xdc/0xfa
[ 155.808389] [<ffffffff812880b5>] ? netif_tx_unlock+0x46/0x46
[ 155.808399] [<ffffffff8104ad58>] ? __do_softirq+0xb9/0x177
[ 155.808409] [<ffffffff8106552b>] ? timekeeping_get_ns+0xd/0x2a
[ 155.808418] [<ffffffff8133506c>] ? call_softirq+0x1c/0x30
[ 155.808428] [<ffffffff8100f845>] ? do_softirq+0x3c/0x7b
[ 155.808437] [<ffffffff8104afc0>] ? irq_exit+0x3c/0x9a
[ 155.808446] [<ffffffff8100f575>] ? do_IRQ+0x82/0x98
[ 155.808455] [<ffffffff8132e16e>] ? common_interrupt+0x6e/0x6e
[ 155.808459] <EOI> [<ffffffff811d586f>] ? intel_idle+0xd4/0xf9
[ 155.808476] [<ffffffff811d584e>] ? intel_idle+0xb3/0xf9
[ 155.808487] [<ffffffff81251e5a>] ? cpuidle_idle_call+0xf0/0x175
[ 155.808496] [<ffffffff8100d250>] ? cpu_idle+0x9c/0xe0
[ 155.808505] [<ffffffff81320633>] ? start_secondary+0x1d5/0x1db
[ 155.808512] ---[ end trace 592c05a5ee2abd2c ]---
[ 155.834084] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 155.834248] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps
Full Duplex>
[ 1997.500138] usb 1-2: new high speed USB device number 5 using ehci_hcd
[ 1997.637240] usb 1-2: New USB device found, idVendor=0930, idProduct=6545
[ 1997.637254] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1997.637265] usb 1-2: Product: DT 101 G2
[ 1997.637273] usb 1-2: Manufacturer: Kingston
[ 1997.637281] usb 1-2: SerialNumber: 001CC0EC34D2EB1150000092
[ 1998.298129] usbcore: registered new interface driver uas
[ 1998.310592] Initializing USB Mass Storage driver...
[ 1998.311000] scsi4 : usb-storage 1-2:1.0
[ 1998.311503] usbcore: registered new interface driver usb-storage
[ 1998.311512] USB Mass Storage support registered.
[ 1999.399057] scsi 4:0:0:0: Direct-Access Kingston DT 101 G2
PMAP PQ: 0 ANSI: 0 CCS
[ 2000.285818] sd 4:0:0:0: [sdb] 30233472 512-byte logical blocks:
(15.4 GB/14.4 GiB)
[ 2000.286420] sd 4:0:0:0: [sdb] Write Protect is off
[ 2000.286433] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2000.287036] sd 4:0:0:0: [sdb] No Caching mode page present
[ 2000.287048] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2000.291167] sd 4:0:0:0: [sdb] No Caching mode page present
[ 2000.291182] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2000.304748] sdb: sdb1
[ 2000.307530] sd 4:0:0:0: [sdb] No Caching mode page present
[ 2000.307541] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2000.307549] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2006.753574] FAT-fs (sdb1): utf8 is not a recommended IO charset for
FAT filesystems, filesystem will be case sensitive!
[ 9077.177937] keyboard: can't emulate rawmode for keycode 240
[ 9077.177963] keyboard: can't emulate rawmode for keycode 240
[ 9077.177978] asus_wmi: Unknown key 57 pressed
[ 9077.376719] keyboard: can't emulate rawmode for keycode 240
[ 9077.376780] keyboard: can't emulate rawmode for keycode 240
[ 9077.376796] asus_wmi: Unknown key 58 pressed
[ 9094.539551] keyboard: can't emulate rawmode for keycode 240
[ 9094.539601] keyboard: can't emulate rawmode for keycode 240
[ 9094.539626] asus_wmi: Unknown key 57 pressed
[ 9094.545563] keyboard: can't emulate rawmode for keycode 240
[ 9094.545595] keyboard: can't emulate rawmode for keycode 240
[ 9094.545613] asus_wmi: Unknown key 58 pressed
germ@Galileo:~$
fstab tiene estas líneas:
GNU nano 2.2.6 Fichero: fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=9174390d-f5b8-405c-9d2e-692a2e8fd3a8 / ext3
errors=remount-ro 0 1
# /home was on /dev/sda9 during installation
UUID=977c59bd-adf4-4fec-8991-dc11dbad9afb /home ext3
defaults 0 2
# /tmp was on /dev/sda8 during installation
UUID=90a8508a-1357-47eb-a14d-45d7f3c214a1 /tmp ext3
defaults 0 2
# /usr was on /dev/sda5 during installation
UUID=ccf39ead-ab70-4d1d-81be-0ce80d6d4218 /usr ext3
defaults 0 2
# /var was on /dev/sda6 during installation
UUID=11b3f08c-f502-403d-9568-38cdfaa194cb /var ext3
defaults 0 2
# swap was on /dev/sda7 during installation
UUID=fda561aa-c736-43b1-83eb-22d906c868e6 none swap sw
0 0
#/dev/sdb1 /media/cdrom0 udf,iso9660 user, noauto 0 0
/dev/sdb1 /media/usb vfat rw,user,noauto 0 0
iso9660 es la codificación de las locales? qué debería poner ahí? no
tengo cdrom. es una netbook.
Muchas gracias por sus respuestas. Saludos,
Gerardo
El 30/01/12, Camaleón <noelamac@gmail.com> escribió:
> El Mon, 30 Jan 2012 14:06:19 -0300, Gerardo A. Mirkin escribió:
>
> Ese html...
>
>> Cuando intento guardar archivos con acentos en /media/usb (por ejemplo,
>> un archivo de texto síntesis.odt) no me permite. Si lo guardo sin acento
>> (por ejemplo, sintesis.odt) no hay problema. Ese problema no se presenta
>> si guardo los archivos al disco rígido en mi directorio. No sé si el
>> problema es debido a algo relativo a permisos o locales. Muchas gracias.
>
> Cuando insertas la llave USB, ejecuta "dmesg" y revisa lo que te dice.
> Seguramente tengas que montar la llave con un valor para "iocharset="
> distinto del predeterminado.
>
> Saludos,
>
> --
> Camaleón
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> Archive: http://lists.debian.org/jg6nv9$n8f$11@dough.gmane.org
>
>
Reply to: