Debian, discos muy lentos (Pendrive,HD, Grabacion de dvd)
Hola a Todos espero que se encuentren muy bien.
Les comento.
Tengo un detalle con lenny, el problema radica en que es muy lento para escribir, demasiado, esto pasa al grabar un DVD, al Grabar Un Pendrive o al copiar al disco desde otra partición. no se por que sera, lo comenze a notar al grabar DVD se demora casi una hora, con Brasero. :S , la verdad es que no lo habia notado hasta que me puse a grabar DVD, y pasar info a un pendrive.
Es un Portatil HP Pavilion DV2925LA.
el hdparm tira esto , mas aya no se que deba hacer...
scorpio:/home/faravena# hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: FUJITSU MHZ2250BH G2
Serial Number: K617T862DESG
Firmware Revision: 8909
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Used: ATA-8-ACS revision 3f
Supported: 8 7 6 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* unknown 76[11]
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
164min for SECURITY ERASE UNIT. 164min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000e04226301d
NAA : 5
IEEE OUI : e
Unique ID : 04226301d
Checksum: correct
despues ejecuto para medir la copia
scorpio:/home/faravena# hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads: 2014 MB in 2.00 seconds = 1006.92 MB/sec
Timing buffered disk reads: 162 MB in 3.00 seconds = 53.92 MB/sec
y de hay no se que mas tengo que hacer, no se tampoco si los datos son correctos y si esto tiene o no que ver con la grabacion de DVD :S aver si me echan una mano.
| LINUX.
|
|
| This message doesn't contain viruses, because it has been created with
| Linux.
|
|_______________________________________________________________________
Reply to: