Grabar CDs en NEC 6650A
Buenos días,
Tengo un portatil Dell con una grabadora NEC DVD+/-RW ND-6650A y he
intentado grabar cds con cdrecord utilizando el comando como root (aunq
no tendría q ser necesario)
cdrecord dev=/dev/hdc Imagen.iso
Tengo la Debian testing y utilizo el núcleo 2.6.14 con el ide-cd.
CdRecord empieza a grabar pero al poco da un error se para la grabación.
Al intentar leer el Cd despues se ven los archivo pero dan error al
copiar, da la impresión que solo pudo grabar la tabla donde están los
archivos.
Alguna idea?
Daniel
P.S.: lo que me dice el cdrecord es lo siguiente:
cdrecord: Warning: Running on Linux-2.6.14.2
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1
'@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J.
Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+-RW ND-6650A'
Revision : '102C'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on
DVD support.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Starting to write CD/DVD at speed 24 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 71 D4 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.001s timeout 40s
write track data: error after 59678720 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.
Reply to: