[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ¡¡'KERNEL AYUDA!! (Compilar)



Empieza a extenderse la manía (no tengo nada en contra) de compilar los kernels de la serie 2.4.x muy peladitos, por lo que es necesario adjuntarles una imagen con los módulos básicos para el arranque, como los del sistema de archivos.

En definitiva, te falta en el lilo, debajo de "image=/vmlinuz" algo así como "initrd=/initrd.img". Acuerdate de actualizar el sector de arranque una vez editao el "lilo.conf" (simplemente teclea "lilo").

Por cierto, apt-get te avisa al instalar cualquier imagen del kernel que requiera de esto.

Saludos.

xxx pss a ti te lo voy a dexir escribió:

Ola...soy el que mandó ayer un mail diciendo que tenia problemas con la compilacion del kernel...bueno antes de nada gracias a los que respondieron...bueno aki sigo con las dudas....

Me recomendaron que hiciera un "apt-get install kernel-image-2.4.18-1-586" bueno....pues lo ice y se me bajo un archivo de unos 8 mbs que descomprimido se quedo en 24....bueno....entonces reinicie y al acerlo me salia en el LILO : Linux Old, Linux ....bueno le di a linuz y me da un mensaje de error que pone:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
request_module[block-major-22]: root fs not mounted
VFS: Cannot open root device "1606" or 16:06
Please append a correct "root=" boot option
Kernel Panic: VFS: Unable to mount fs on 16:06
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<



El error lo he copiado a mano asique alomejor cambia algun espacio o algo, bueno....me dijeron que podria ser por una mala configuracion del lilo, pues aki os posteo mi conf del lilo:


lba32

# Overrides the default mapping between harddisk names and the BIOS'
# harddisk order. Use with caution.
disk=/dev/hdc
bios=0x80


# Specifies the boot device.  This is where Lilo installs its boot
# block.  It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/hdc

# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller.  Using `compact' is especially recommended when
# booting from a floppy disk.  It is disabled here by default
# because it doesn't always work.
#
# compact

# Installs the specified file as the new boot sector
# You have the choice between: bmp, compat, menu and text
# Look in /boot/ and in lilo.conf(5) manpage for details
#
install=/boot/boot-menu.b

# Specifies the location of the map file
#
map=/boot/map

# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration.  If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.

# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well.  Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000

# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20

# You can put a customized boot message up if you like.  If you use
# `prompt', and this computer may need to reboot unattended, you
# for a keypress.  `single-key' goes with the `alias' lines in the
# `image' configurations below.  eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
prompt
timeout=150
#       prompt
#       single-key
#       delay=100
#       timeout=100

# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
vga=normal

# Kernel command line options that apply to all installed images go
# here.  See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""

# Boot up Linux by default.
#
default=Linux

image=/vmlinuz
       label=Linux
       read-only
       optional
#       restricted
#       alias=1

image=/vmlinuz.old
       label=LinuxOLD
       read-only
       optional
#       restricted
#       alias=2


<


Alguien me puede decir que tengo que cambiar??? Por cierto, si le doy a linuxOld si que me carga el linux, pero el antiguo con el kernel 2.2 que tengo ahoramismo, gracias

Porfavor es de vital importancia, gracias

_________________________________________________________________
Descubre el mayor catálogo de coches de la Red en MSN Motor. http://motor.msn.es/researchcentre/






Reply to: