Magneto Optico
Hola lista.....
Resulta que me han regalado un viejo MO Fujitsu (y la correspondiente tarjeta scsii)
de 640Mb, lo he instalado y aparentemente todo ha ido bien, por lo que
parece en la salida del arranque (dmesg) realizado con un disco formateado
en windows introducido en la unidad, el problema es que no soy capaz de
montar la unidad para poder acceder a ella, la lectura del
Optical-Disk-HOWTO no me ha arrojado ninguna luz. Os adjunto la salida de
dmesg y os hago notar que tengo una grabadora ide emulada como scsii.
¿Podeis ayudarme o indicarme algún otro documento que leer?
--
=======NaClU2===================================IJAS========
_/ _/ _/_/_/ _/_/_/ Desde: 40º25'N 3º39'O
_/ _/ _/ _/ _/ mailto:cyb.org@technologist.com
_/ _/ _/ _/_/_/ _/_/_/ KRIPTOPOLIS (ANTI-L$$I)
_/ _/ _/ _/ _/ _/http://anas.worldonline.es/ijalonso
_/ _/_/_/ _/ _/ _/_/_/ http://club.telepolis.com/ijas
============================================================
Linux version 2.2.17 (herbert@arnor) (gcc version 2.95.2 20000313 (Debian GNU/Linux)) #1 Sun Jun 25 09:24:41 EST 2000
Detected 233291 kHz processor.
ide_setup: hdc=ide-cd
ide_setup: hdd=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 465.31 BogoMIPS
Memory: 224376k/229376k available (1732k kernel code, 416k reserved, 2712k data, 140k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Klamath) stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd9c4
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV2044D, ATA DISK drive
hdb: FUJITSU MPB3043ATU, ATA DISK drive
hdc: FX320S, ATAPI CDROM drive
hdd: Memorex CDRW-6424, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG SV2044D, 19464MB w/472kB Cache, CHS=2481/255/63
hdb: FUJITSU MPB3043ATU, 4125MB w/0kB Cache, CHS=525/255/63
hdc: ATAPI 32X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
aha152x: BIOS test: passed, auto configuration: ok, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: No Microchannel-bus support present -> Aborting.
megaraid: v107 (December 22, 1999)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.
Vendor: FUJITSU Model: M2513A Rev: 1700
Type: Direct-Access ANSI SCSI revision: 01
Detected scsi removable disk sda at scsi0, channel 0, id 3, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 2048 bytes. Sectors= 310352 [606 MB] [0.6 GB]
sda: Write Protect is off
Partition check:
sda: sda1 sda2 sda3 sda4
hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: hdb1 hdb2 hdb3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 128516k swap-space (priority -1)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.16 detected OK (220)
<SoundBlaster EMU8000 (RAM512k)>
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 1
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi1, channel 0, id 0, lun 2
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 3
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi1, channel 0, id 0, lun 4
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi1, channel 0, id 0, lun 5
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi1, channel 0, id 0, lun 6
Vendor: Memorex Model: CDRW-6424 Rev: 1.50
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr7 at scsi1, channel 0, id 0, lun 7
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr4: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr5: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr6: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr7: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device ide1(22,0)
cdrom: This disc doesn't have any tracks I recognize!
Reply to: