Solución a conectarme a internet mediante infovía con pon
Hola,
el problema era simplemente que al pedirme el nombre de usuario lo ponía si el
@proveedor (me conecto por infovía) por lo que el login fallaba.
Aunque examinando el ppp.log he visto que salen varias lineas que antes no
salian por lo que las pongo aqui por si alguien sabe de que se trata.
Aug 16 19:47:30 Estruch pppd[498]: pppd 2.3.5 started by root, uid 0
Aug 16 19:47:31 Estruch chat[499]: abort on (BUSY)
Aug 16 19:47:31 Estruch chat[499]: abort on (NO CARRIER)
Aug 16 19:47:31 Estruch chat[499]: abort on (VOICE)
Aug 16 19:47:31 Estruch chat[499]: abort on (NO DIALTONE)
Aug 16 19:47:31 Estruch chat[499]: abort on (NO ANSWER)
Aug 16 19:47:31 Estruch chat[499]: send (AT&F2^M)
Aug 16 19:47:31 Estruch chat[499]: expect (OK)
Aug 16 19:47:31 Estruch chat[499]: AT&F2^M^M
Aug 16 19:47:31 Estruch chat[499]: OK
Aug 16 19:47:31 Estruch chat[499]: -- got it
Aug 16 19:47:31 Estruch chat[499]: send (ATDT055^M)
Aug 16 19:47:32 Estruch chat[499]: expect (CONNECT)
Aug 16 19:47:32 Estruch chat[499]: ^M
Aug 16 19:47:50 Estruch chat[499]: ATDT055^M^M
Aug 16 19:47:50 Estruch chat[499]: CONNECT
Aug 16 19:47:50 Estruch chat[499]: -- got it
Aug 16 19:47:50 Estruch chat[499]: send (\d)
Aug 16 19:47:51 Estruch pppd[498]: Serial connection established.
Aug 16 19:47:52 Estruch pppd[498]: Using interface ppp0
Aug 16 19:47:52 Estruch pppd[498]: Connect: ppp0 <--> /dev/ttyS2
#--------asta aqui normal--------------#
Aug 16 19:47:52 Estruch pppd[498]: sent [LCP ConfReq id=0x1 <magic 0xffff4495> <
pcomp> <accomp>]
Aug 16 19:47:52 Estruch pppd[498]: rcvd [LCP ConfReq id=0x1 <mru 1524> <asyncmap
0xa0000> <auth pap> <pcomp> <accomp> < 13 0e 01 69 6e 66 6f 76 69 61 2d 4d 50 5
0>]
Aug 16 19:47:52 Estruch pppd[498]: sent [LCP ConfRej id=0x1 < 13 0e 01 69 6e 66
6f 76 69 61 2d 4d 50 50>]
Aug 16 19:47:52 Estruch pppd[498]: rcvd [LCP ConfAck id=0x1 <magic 0xffff4495> <
pcomp> <accomp>]
Aug 16 19:47:52 Estruch pppd[498]: rcvd [LCP ConfReq id=0x2 <mru 1524> <asyncmap
0xa0000> <auth pap> <pcomp> <accomp>]
Aug 16 19:47:52 Estruch pppd[498]: sent [LCP ConfAck id=0x2 <mru 1524> <asyncmap
0xa0000> <auth pap> <pcomp> <accomp>]
Aug 16 19:47:52 Estruch pppd[498]: sent [PAP AuthReq id=0x1 user="milogin
" password="mipass"]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [PAP AuthAck id=0x1 ""]
Aug 16 19:47:53 Estruch pppd[498]: Remote message:
Aug 16 19:47:53 Estruch pppd[498]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <com
press VJ 0f 01>]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [CCP ConfReq id=0x1 < 11 06 00 01 01 03>
]
Aug 16 19:47:53 Estruch pppd[498]: sent [CCP ConfReq id=0x1]
Aug 16 19:47:53 Estruch pppd[498]: sent [CCP ConfRej id=0x1 < 11 06 00 01 01 03>
]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [IPCP ConfReq id=0x1 <addr 172.16.1.19>]
Aug 16 19:47:53 Estruch pppd[498]: sent [IPCP ConfAck id=0x1 <addr 172.16.1.19>]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>
]
Aug 16 19:47:53 Estruch pppd[498]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [CCP ConfRej id=0x1]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [IPCP ConfNak id=0x2 <addr 195.235.10.19
6>]
Aug 16 19:47:53 Estruch pppd[498]: sent [IPCP ConfReq id=0x3 <addr 195.235.10.19
6>]
Aug 16 19:47:53 Estruch pppd[498]: rcvd [IPCP ConfAck id=0x3 <addr 195.235.10.19
6>]
#------------acaba lo raro------------------#
Aug 16 19:47:53 Estruch pppd[498]: local IP address 195.235.10.196
Aug 16 19:47:53 Estruch pppd[498]: remote IP address 172.16.1.19
#---------aqui desconecto (poff) -------------#
Aug 16 19:52:09 Estruch pppd[498]: Terminating on signal 15.
Aug 16 19:52:09 Estruch pppd[498]: sent [LCP TermReq id=0x2 "User request"]
Aug 16 19:52:09 Estruch pppd[498]: rcvd [LCP TermAck id=0x2]
Aug 16 19:52:09 Estruch pppd[498]: Connection terminated.
Aug 16 19:52:09 Estruch pppd[498]: Exit.
Otra duda, los scripts o programas que quiero que corran al conectarme donde los
tengo que poner? En el fichero ip-up o en la carpeta ip-up.d? De que forma debo
poner las ordenes o scripts?
Un saludo,
J. Parera
Reply to: