[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Re: Computador compartilhado por 2 pessoas?



On Thu, Jan 20, 2011 at 7:15 PM, Marcelo Laia <marcelolaia@gmail.com> wrote:
Bom, to quase lá ....

Consegui fazer os dois monitores funcionar com as duas cabeças. Mas,
antes, eu tive que reverter para o gdm, pois eu estava usando o gdm3.
Pergunta: quando o gdm3 substituir o gdm, como fazer? Mas, isso é pra
depois.

No primeiro terminal, onde estou neste momento, esta funcionando
(quase)tudo! O problema está no teclado. Eu já configurei para usar o
evdev, mas o teclado numerico nao funciona. A seta para cima abre o
printscreen e o printscreen nao abre nada. Alem disso, as setas so
andam com o toque, ou seja, se eu segurar uma seta pressionada por 10
minutos, ela so anda um passo. Assim, como o teclado numerico nao esta
funcionando, eu uso as setas do teclado numerico. Mas, a cada seta,
tiro 10 printscreen da tela! Sem contar que minha filha quase me
bateu, pois nao aguenta mais tirar print da tela! Quanto ao teclado,
minha suposicao é de que a tecla NumLock é que nao esta funcionado.
Assim, tenho 3 teclas nao funcionando adequadamente: seta para cima
(tira print da tela), printscreen (nao acontece nada) e NumLock (nao
acontece nada ao pressiona-la).

No segundo terminal, eu consigo ver a tela do GDM para login, o mouse
funciona perfeitamente, mas nao acontece nada quando tento digitar
algo. Ou seja, o teclado nao esta funcionando.

Eu já testei as configurações desse site
http://en.wikibooks.org/wiki/Multiterminal_with_evdev#xorg.conf

O meu Xorg.0.log esta assim:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux inael 2.6.32-5-686-bigmem #1 SMP Wed
Jan 12 04:40:25 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem
root=UUID=c0183d2f-d659-44cf-a313-615848ec00e2 ro quiet
Build Date: 02 December 2010  01:08:37AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
       Before reporting problems, check http://wiki.x.org
       to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
       (++) from command line, (!!) notice, (II) informational,
       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 20 19:09:20 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "Mouse0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(**) Option "AllowEmptyInput" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
       Entry deleted from font path.
(==) FontPath set to:
       /usr/share/fonts/X11/misc,
       /usr/share/fonts/X11/100dpi/:unscaled,
       /usr/share/fonts/X11/75dpi/:unscaled,
       /usr/share/fonts/X11/Type1,
       /usr/share/fonts/X11/100dpi,
       /usr/share/fonts/X11/75dpi,
       /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
       built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Duplicate core keyboard devices.  Removing core keyboard
attribute from "Keyboard1"
(II) Loader magic: 0x81ec060
(II) Module ABI versions:
       X.Org ANSI C Emulation: 0.4
       X.Org Video Driver: 6.0
       X.Org XInput driver : 7.0
       X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0421:0000:0000 nVidia Corporation G86
[GeForce 8500 GT] rev 161, Mem @ 0xfa000000/16777216,
0xc0000000/536870912, 0xf8000000/33554432, I/O @ 0x0000bf00/128, BIOS
@ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
       compiled for 4.0.2, module version = 1.0.0
       Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.31  Tue Jun  1 23:22:44 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       Module class: X.Org Server Extension
       ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.1.0
       ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
       compiled for 1.7.6.901, module version = 2.3.2
       Module class: X.Org XInput Driver
       ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       Module class: X.Org Server Extension
       ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.13.0
       Module class: X.Org Server Extension
       ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.1.0
       ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
       compiled for 4.0.2, module version = 1.0.0
       Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.4.0
       Module class: X.Org XInput Driver
       ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.5.0
       Module class: X.Org XInput Driver
       ABI class: X.Org XInput driver, version 7.0
(II) NVIDIA dlloader X Driver  195.36.31  Tue Jun  1 22:21:58 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
       compiled for 1.7.7, module version = 1.0.0
       ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "MetaModes" "1280x800_60.00 +0+0; CRT-0:
nvidia-auto-select +0+0"
(**) Jan 20 19:09:22 NVIDIA(0): Enabling RENDER acceleration
(II) Jan 20 19:09:22 NVIDIA(0): Support for GLX with the Damage and
Composite X extensions is
(II) Jan 20 19:09:22 NVIDIA(0):     enabled.
(WW) Jan 20 19:09:23 NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
(II) Jan 20 19:09:23 NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at
PCI:1:0:0 (GPU-0)
(--) Jan 20 19:09:23 NVIDIA(0): Memory: 524288 kBytes
(--) Jan 20 19:09:23 NVIDIA(0): VideoBIOS: 60.86.34.00.21
(II) Jan 20 19:09:23 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jan 20 19:09:23 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 20 19:09:23 NVIDIA(0): Connected display device(s) on GeForce
8500 GT at PCI:1:0:0:
(--) Jan 20 19:09:23 NVIDIA(0):     AOC 511Vw (CRT-0)
(--) Jan 20 19:09:23 NVIDIA(0):     CRT-1
(--) Jan 20 19:09:23 NVIDIA(0): AOC 511Vw (CRT-0): 400.0 MHz maximum pixel clock
(--) Jan 20 19:09:23 NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
(II) Jan 20 19:09:23 NVIDIA(0): Display Device found referenced in
MetaMode: CRT-0
(II) Jan 20 19:09:23 NVIDIA(0): Assigned Display Device: CRT-0
(WW) Jan 20 19:09:23 NVIDIA(0): No valid modes for
"1280x800_60.00+0+0"; removing.
(II) Jan 20 19:09:23 NVIDIA(0): Validated modes:
(II) Jan 20 19:09:23 NVIDIA(0):     "CRT-0:nvidia-auto-select+0+0"
(II) Jan 20 19:09:23 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) Jan 20 19:09:23 NVIDIA(0): DPI set to (95, 92); computed from
"UseEdidDpi" X config
(--) Jan 20 19:09:23 NVIDIA(0):     option
(==) Jan 20 19:09:24 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "MetaModes" "1280x800_60.00 +0+0; CRT-1:
nvidia-auto-select +0+0"
(**) Jan 20 19:09:24 NVIDIA(1): Enabling RENDER acceleration
(II) Jan 20 19:09:24 NVIDIA(1): NVIDIA GPU GeForce 8500 GT (G86) at
PCI:1:0:0 (GPU-0)
(--) Jan 20 19:09:24 NVIDIA(1): Memory: 524288 kBytes
(--) Jan 20 19:09:24 NVIDIA(1): VideoBIOS: 60.86.34.00.21
(II) Jan 20 19:09:24 NVIDIA(1): Detected PCI Express Link width: 16X
(--) Jan 20 19:09:24 NVIDIA(1): Interlaced video modes are supported on this GPU
(--) Jan 20 19:09:24 NVIDIA(1): Connected display device(s) on GeForce
8500 GT at PCI:1:0:0:
(--) Jan 20 19:09:24 NVIDIA(1):     AOC 511Vw (CRT-0)
(--) Jan 20 19:09:24 NVIDIA(1):     CRT-1
(--) Jan 20 19:09:24 NVIDIA(1): AOC 511Vw (CRT-0): 400.0 MHz maximum pixel clock
(--) Jan 20 19:09:24 NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
(II) Jan 20 19:09:24 NVIDIA(1): Display Device found referenced in
MetaMode: CRT-1
(II) Jan 20 19:09:24 NVIDIA(1): Assigned Display Device: CRT-1
(WW) Jan 20 19:09:24 NVIDIA(1): No valid modes for
"1280x800_60.00+0+0"; removing.
(II) Jan 20 19:09:24 NVIDIA(1): Validated modes:
(II) Jan 20 19:09:24 NVIDIA(1):     "CRT-1:nvidia-auto-select+0+0"
(II) Jan 20 19:09:24 NVIDIA(1): Virtual screen size determined to be 1024 x 768
(WW) Jan 20 19:09:24 NVIDIA(1): Unable to get display device CRT-1's
EDID; cannot compute DPI
(WW) Jan 20 19:09:24 NVIDIA(1):     from CRT-1's EDID.
(==) Jan 20 19:09:24 NVIDIA(1): DPI set to (75, 75); computed from
built-in default
(==) Jan 20 19:09:24 NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 20 19:09:24 NVIDIA: Using 768.00 MB of virtual memory for
indirect memory access.
(II) Jan 20 19:09:24 NVIDIA(0): Initialized GPU GART.
(II) Jan 20 19:09:24 NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) Jan 20 19:09:25 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 20 19:09:25 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Jan 20 19:09:25 NVIDIA(1): Initialized GPU GART.
(II) Jan 20 19:09:25 NVIDIA(1): Setting mode "CRT-1:nvidia-auto-select+0+0"
(II) Jan 20 19:09:25 NVIDIA(1): Initialized OpenGL Acceleration
(==) NVIDIA(1): Disabling shared memory pixmaps
(II) Jan 20 19:09:25 NVIDIA(1): Initialized X Rendering Acceleration
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(**) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
SELinux: Disabled on system, not enabling in X server
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "evdev"
(**) Keyboard0: XkbRules: "evdev"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br-abnt2"
(**) Keyboard0: XkbLayout: "br-abnt2"
(**) Option "XkbVariant" "deadkeys"
(**) Keyboard0: XkbVariant: "deadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "CoreKeyboard" "False"
(**) Keyboard1: doesn't report core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "XkbRules" "evdev"
(**) Keyboard1: XkbRules: "evdev"
(**) Option "XkbModel" "abnt2"
(**) Keyboard1: XkbModel: "abnt2"
(**) Option "XkbLayout" "br-abnt2"
(**) Keyboard1: XkbLayout: "br-abnt2"
(**) Option "XkbVariant" "deadkeys"
(**) Keyboard1: XkbVariant: "deadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
[mi] miSpriteRealizeCursor called for floating device.
[mi] miSpriteRealizeCursor called for floating device.
[mi] miSpriteRealizeCursor called for floating device.
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) acceleration profile 0
(**) Mouse0: (accel) acceleration factor: 2.000
(**) Mouse0: (accel) acceleration threshold: 4
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE
(/dev/input/event4)
(**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4"
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
(II) PIXART USB OPTICAL MOUSE: Found relative axes
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE"
(type: MOUSE)
(II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device   USB Keyboard (/dev/input/event5)
(**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event5"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device   USB Keyboard (/dev/input/event6)
(**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event6"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event7)
(**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event7"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found absolute axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse: initialized for relative axes.
(WW) USB Optical Mouse: ignoring absolute axes.
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)

A principio, os dois teclados foram devidamente reconhecidos.

No terminal 1 eu tenho: teclado e mouse usb

No terminal 2 eu tenho: mouse usb e teclado ps/2

Alguma sugestao?

Obrigado

--
  O__   --- Marcelo Luiz de Laia                  Rodovia MGT 367, Km 583
 c/   /' _ -- Dep. de Engenharia Florestal      nº 5000, Alto da Jacuba
(*)   \ (*) - UFVJM, Diamantina, MG, Brasil  Ph: (+55) 38 3532 1248
~~~~~~- (www.ufvjm.edu.br/floresta)           FAX: (+55) 38 3532 1200
^^^^^^^^^^- Linux user number 487797          CEP: 39.100-000 - Brazil


--
To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTin54keS2mVRAUZ7cwEbOqN-KJs23pU6jX48QObq@mail.gmail.com" target="_blank">http://lists.debian.org/AANLkTin54keS2mVRAUZ7cwEbOqN-KJs23pU6jX48QObq@mail.gmail.com



Marcelo, 
O que está ocorrendo com o seu teclado é um bug conhecido. Não tem a ver com o xorg.conf. Você deve configurar o teclado para "evdev-managed" no seu ambiente gráfico. No kde você vai em Configurações do sistema > Regional e Idioma > Leiaute do teclado > na aba Leiaute vá em "Modelo de teclado" escolha "evdev managed keyboard". No Gnome não sei, mas deve ter algo semelhante.
Veja também o tópico original, com as dicas do polegato.

Reply to: