k3b e gravador usb ..
(Ganha um doce quem me conseguir me ajudar .. ) ;)
Estou tendo um problema ao tentar usar o k3b, ou melhor, esse problema
jah me acompanha a meses .. ;)
Consigo gravar cd usando diretamente o cdrecord, mas nao consigo gravar
atraves do k3b que envia comandos atraves do cdrecord (duh..) :))
Meu hardware eh um Libretto U105 com uma dock que eh um gravador de cd..
A conexao entre a dock e o note, apesar de parecer algo que soh existe
neste modelo, conecta o drive como usb.. Hotswap.. Inclusive quando
manipulo ela pelo Windows (sim, uma vez lah que nunca booto ele no
Windows pre-instalado), aparece como USB ..
Versoes:
Debian Unstable totalmente nao-atualizado :(
k3b 0.12.15
Cdrecord-Clone 2.01.01a03
O k3b detecta um drive /dev/scd0 como sendo o dev=11,0,0 e especificando
esse device no cdrecord diretamente, nao funciona ...
O k3b estah enviando esta linha de comando para apagar um cd-rw:
/usr/bin/cdrecord.mmap -v gracetime=2 dev=11,0,0 speed=4 -tao driveropts=burnfree -eject blank=fast
Mandando essa linha de comando diretamente no prompt SEM especificar o
dev=11,0,0 ela irah funcionar!!
Meu /etc/cdrecord/cdrecord ..
#################
CDR_DEVICE=cdrom
CDR_FIFOSIZE=4m
# drive name device speed fifosize driveropts
cdrom= /dev/cdrom -1 -1 burnfree
############################################
Output do comando...
# /usr/bin/cdrecord.mmap -v gracetime=2 speed=4 -tao driveropts=burnfree
-eject blank=fast
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
/usr/bin/cdrecord: Warning: Running on Linux-2.6.16
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'debian-0.8debian2'.
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-822S '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x001B
Profile: 0x001A
Profile: 0x0013
Profile: 0x0014
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 0.042s
Nao achei uma maneira de fazer com que o k3b deixe de enviar a
especificacao do dispositivo... Acho que esta seria a solucao..
Obrigado pela atencao
JA Tavares
Reply to: