etch, raid przestał działać.
Witam serdecznie.
Miałem skonfigurowany raid 1 na serwerze i pracował bez problemu aż ....
i widzę tylko:
......
Loading MD modules
md: raid1 personality registered for level 1
Success: loaded module raid1
Done.
Begin: Assembling all MD arrays ...
md: md0 Stopped
md: bind<hdc1>
md: bind<hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
mdadm: /dev/md0 has been started with 2 drivers
md: md1 Stopped
md: bind<hdc2>
md: bind<hda2>
raid1: raid set md1 active with 2 out of 2 mirrors
mdadm: /dev/md1 has been started with 2 drivers
md: md2 Stopped
md: bind<hdc3>
md: bind<hda3>
raid1: raid set md2 active with 2 out of 2 mirrors
mdadm: /dev/md2 has been started with 2 drivers
Success: assembled all arrays
Done.
Done.
Begin: Running /scripts/local-premount...
Done.
mount: Mounting /dev/md0 on /root failed: invalid argument
Begin: Running /scripts/local-bottom
Done.
Done.
Begin: Running /scripts/init-bottom
mount: Mounting /root/dev on /dev/.static/dev failed no such file or
directory
Done.
mount: Mounting /sys/ on /root/sys failed no such file or directory
Done.
mount: Mounting /proc/ on /root/proc failed no such file or directory
Done.
Target filesystem doesn't have /sbin/init
/bin/sh: can't access tty; job control turned off
(initramfs)_
Nadmienię iż cat /proc/mdstat pokazuje że md0, md1, md2 są aktywne,
pracują (UU) i żadne dyski nie zostały pominięte.
Proszę o pomoc bo nie wiem jak to ugryźć.
jarek m.
--
List przeskanowano programem ArcaMail, ArcaVir 2008
przeskanowano 2008-02-27 10:24:19, silnik: 2008.01.01 12:00:00, bazy: 2008.02.26 17:38:13
This message has been scanned by ArcaMail, ArcaVir 2008
scanned 2008-02-27 10:24:19, engine: 2008.01.01 12:00:00, base: 2008.02.26 17:38:13
http://www.arcabit.com
Reply to: