Hp LaserJet 1020 : Debian Sarge , prawie dziala
Dostałem drukarkę jak w Temacie i mam mały problem. Postępowałem w miarę
zgodnie z instrukcjami :
http://ubuntuforums.org/showpost.php?p=483421&postcount=4
oraz :
http://support.ideainformatica.com/hplj1020/
Dodałem drukarkę w KDE. Klikam Test i nie drukuje ale mniejsza o to.
Uruchamiam komputer raz jeszcze. Włączam drukarkę i co dostaje
w /var/log/messages
Jan 1 22:08:46 localhost kernel: hub.c: new USB device 00:07.2-2,
assigned address 2
Jan 1 22:08:46 localhost kernel: usb.c: USB device 2 (vend/prod
0x3f0/0x2b17) is not claimed by any active driver.
Jan 1 22:08:50 localhost kernel: usb.c: registered new driver usblp
Jan 1 22:08:50 localhost kernel: printer.c: usblp0: USB Bidirectional
printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
Jan 1 22:08:50 localhost kernel: printer.c: v0.13: USB Printer Device
Class driver
Jan 1 22:08:50 localhost usb.agent[2693]: printer: loaded
successfully
Jan 1 22:08:50 localhost usb.agent[2693]: hplj1020: loaded
successfully
Jan 1 22:08:50 localhost /etc/hotplug/usb/hplj1020: loading HP LaserJet
1020 firmware /lib/firmware/sihp1020.dl to /dev/usb/lp0 ...
Jan 1 22:08:52 localhost /etc/hotplug/usb/hplj1020: ... download
successful.
wchodzę w Kwrite i drukuj robię, no i ładnie drukuje:
a w logu dostaje
Jan 1 22:09:52 localhost foo2zjs-wrapper: gs -sPAPERSIZE=a4 -g4960x7016
-r600x600 -sDEVICE=pbmraw
Jan 1 22:09:52 localhost foo2zjs-wrapper: foo2zjs -r600x600 -g4960x7016
-p9 -m1 -n1 -d1 -s7 -u 112x100 -l 112x100 -P
Śllcznie: Co następuje dalej, klikam drukuj raz jeszcze i mam w logu:
Jan 1 22:11:29 localhost foo2zjs-wrapper: foo2zjs-wrapper -P -r600x600
-p9 -s7 -m1 -d1 -n1 -I0
a potem już tylko:
Jan 1 22:11:34 localhost kernel: usb_control/bulk_msg: timeout
Jan 1 22:11:54 localhost last message repeated 2 times
Jan 1 22:12:14 localhost kernel: usb_control/bulk_msg: timeout
Jan 1 22:12:54 localhost last message repeated 4 times
Jan 1 22:13:54 localhost last message repeated 6 times
Jan 1 22:14:54 localhost last message repeated 6 times
Jan 1 22:15:54 localhost last message repeated 6 times
Jan 1 22:16:04 localhost kernel: usb_control/bulk_msg: timeout
Jakiś pomysł co zrobić bym mógł drukować więcej niż jeden raz ??
Co może być winą:
Jan 1 22:12:14 localhost kernel: usb_control/bulk_msg: timeout
Jeszcze tylko nadmienie, że po drugim kliknięciu wydrukuj na drukarce na
przemian miga jedna i druga dioda A w print jobs mam State: Processing
i plik nie znika z listy.
Wyłączyłem drukarkę, włączyłem i wydrukowałem (dało radę
wydrukować :-) ):
Jan 1 22:25:49 localhost kernel: usb.c: USB disconnect on device
00:07.2-2 address 2
Jan 1 22:25:49 localhost kernel: printer.c: usblp0: removed
Jan 1 22:27:13 localhost kernel: hub.c: new USB device 00:07.2-2,
assigned address 3
Jan 1 22:27:13 localhost kernel: printer.c: usblp0: USB Bidirectional
printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
Jan 1 22:27:17 localhost usb.agent[3029]: printer: already loaded
Jan 1 22:27:17 localhost usb.agent[3029]: hplj1020: loaded
successfully
Jan 1 22:27:17 localhost /etc/hotplug/usb/hplj1020: loading HP LaserJet
1020 firmware /lib/firmware/sihp1020.dl to /dev/usb/lp0 ...
Jan 1 22:27:19 localhost /etc/hotplug/usb/hplj1020: ... download
successful.
Jan 1 22:27:59 localhost foo2zjs-wrapper: foo2zjs-wrapper -P -r600x600
-p9 -s7 -m1 -d1 -n1 -I0
Jan 1 22:28:03 localhost kernel: usb_control/bulk_msg: timeout
Jan 1 22:28:03 localhost foo2zjs-wrapper: gs -sPAPERSIZE=a4 -g4960x7016
-r600x600 -sDEVICE=pbmraw
Jan 1 22:28:03 localhost foo2zjs-wrapper: foo2zjs -r600x600 -g4960x7016
-p9 -m1 -n1 -d1 -s7 -u 112x100 -l 112x100 -P
klikam drukuj raz jeszcze :
Jan 1 22:31:34 localhost kernel: usb_control/bulk_msg: timeout
Jan 1 22:32:04 localhost last message repeated 3 times
czyli to co już znamy.
Z góry dziękuje za wszelkie pomocne sugestie, gdzie szukać przyczyny.
Reply to: