auto negotiation sarge 3c59x (dlugie)
Czesc Grupo,
mam maly problemik - polaczenie router-server nie chce mi dzialac na
100baseTx-FD. Sprawdzalem juz router (ssr2000 cabletrona), kabel - sa na
100% sprawne. Jesli na routerze ustawie na sztywno 100full, to link
znika. Jesli mam ustawione na auto, to mam na interface bledy.
Kernel to 2.6.7 z paczki z www.debian-hardened.org
Zanim wymienie karte, chcialym sie zapytac, czy moglbym cos innego
sprobowac, bo chcialbym uniknac downtime...
eth0 Protokoll:Ethernet Hardware Adresse 00:01:02:0C:1D:0A
inet Adresse:x.x.x.x Bcast:x.x.x.x Maske:255.255.255.224
inet6 Adresse: x::x:x:x:x/64 Gltigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1176338 errors:0 dropped:0 overruns:23 frame:0
TX packets:1062965 errors:0 dropped:0 overruns:0 carrier:56302
Kollisionen:217018 Sendewarteschlangenlnge:1000
RX bytes:867031193 (826.8 MiB) TX bytes:728961659 (695.1 MiB)
Interrupt:5 Basisadresse:0x9800
:/home/wojtek# mii-tool -v
eth0: link ok
product info: vendor 00:10:18, model 23 rev 6
basic mode: autonegotiation enabled
basic status: link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
:/home/wojtek# mii-diag -v
mii-diag.c:v2.09 9/06/2003 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Using the default interface 'eth0'.
Using the new SIOCGMIIPHY value on PHY 24 (BMCR 0x1000).
Basic mode control register 0x1000: Auto-negotiation enabled.
You have link beat, and everything is working OK.
This transceiver is capable of 100baseTx-FD 100baseTx 10baseT-FD
10baseT.
Able to perform Auto-negotiation, negotiation not complete.
Your link partner does not do autonegotiation, and this transceiver
type
does not report the sensed link speed.
End of basic transceiver information.
libmii.c:v2.10 4/22/2003 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
MII PHY #24 transceiver registers:
1000 780d 0040 6176 05e1 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
1000 0000 0000 0000 0000 0000 0200 0000
0030 0004 0f00 ff40 0020 0000 0000 000b.
Basic mode control register 0x1000: Auto-negotiation enabled.
Basic mode status register 0x780d ... 780d.
Link status: established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation not complete.
Vendor ID is 00:10:18:--:--:--, model 23 rev. 6.
No specific information is known about this transceiver type.
I'm advertising 05e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD
10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 0000:.
Negotiation did not complete.
Jakis pomysl?
Pozdrowienia
Wojtek
Reply to: