Witajcie.
Nie moge uruchomic polaczenia na SDI.
Wszystko idzie dobrze do momentu negocjowania
protokolu kompresji:
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2d8afc02> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x129fea2e> < 17 04 00 00>]Jun 16 17:12:00 drukarka pppd[885]
sent [LCP ConfRej id=0x1 < 17 04 00 00>]
rcvd [LCP ConfReq id=0x2 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x129fea2e>]
sent [LCP ConfAck id=0x2 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x129fea2e>]
rcvd [LCP ConfReq id=0x3 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x5a55fdaf> < 17 04 00 00>]
sent [LCP ConfRej id=0x3 < 17 04 00 00>]
rcvd [LCP ConfReq id=0x4 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x5a55fdaf>]
sent [LCP ConfAck id=0x4 <mru 1656> <asyncmap 0x0> <auth pap> <magic 0x5a55fdaf>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2d8afc02> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x2d8afc02>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x2d8afc02>]
sent [PAP AuthReq id=0x1 user="oke" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [proto=0xc02b] 01 05 00 0a 01 06 12 99 68 d2
Unsupported protocol 0xc02b received
sent [LCP ProtRej id=0x3 c0 2b 01 05 00 0a 01 06 12 99 68 d2]
itd. a potem:
Script /etc/ppp/ip-up started (pid 887)
Script /etc/ppp/ip-up finished (pid 887), status = 0x1
rcvd [proto=0xc02b] 05 08 00 04
Unsupported protocol 0xc02b received
sent [LCP ProtRej id=0x5 c0 2b 05 08 00 04]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
last message repeated 8 times
CCP: timeout sending Config-Requests
prosze o pomoc.