HP Officejet Pro 6230 unter Debian 12 als Netzwerkdrucker betreiben
Hallo,
ich hatte bis heute einen HP Officejet Pro 6230 unter Debian 12 als Netzwerkdrucker betrieben.
Nach einem Update konnte ich leider gar nicht mehr drucken. Meine Versuche, das Setup wiederzubeleben, sind leider gescheitert.
Da ich nicht mehr genau nachvollziehen kann, wie ich damals den Drucker, der per USB angeschlossen ist, im Netzwerk bekannt gemacht habe, hoffe ich auf Antworten auf die folgenden Fragen. Vielen Dank im voraus, auch für weitergehende Hinweise und Literatur.
Was benötige ich auf dem Server, um von Clients im Netzwerk drucken zu können?
Benötige ich noch hplip, wenn alles jetzt driverless funktionieren sollte? Der Befehl driverless gibt keine Ausgabe.
Benötige ich ipp-usb?
Benötige ich cups-browsed?
Der Vollständigkeit halber die Ausgabe von hp-setup, wo der Drucker zwar erkannt und eingerichtet wird, aber dennoch die Testseite nicht gedruckt wird wegen:
error: Unable to communicate with device (code=12): hp:/usb/Officejet_Pro_6230?serial=TH124BN196
error: Unable to print to printer. Please check device and try again.
~# hp-setup -i
HP Linux Imaging and Printing System (ver. 3.22.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ?
Using connection type: usb
Setting up device: hp:/usb/Officejet_Pro_6230?serial=TH124BN196
---------------------
| PRINT QUEUE SETUP |
---------------------
Please enter a name for this print queue (m=use model name:'Officejet_Pro_6230'*, q=quit) ?m
Using queue name: Officejet_Pro_6230
Locating PPD file... Please wait.
Found PPD file: drv:///hpcups.drv/hp-officejet_pro_6230.ppd
Description:
Note: The model number may vary slightly from the actual model number on the device.
Does this PPD file appear to be the correct one (y=yes*, n=no, q=quit) ? y
Enter a location description for this printer (q=quit) ?Arbeitszimmer
Enter additonal information or notes for this printer (q=quit) ?v1
Adding print queue to CUPS:
Device URI: hp:/usb/Officejet_Pro_6230?serial=TH124BN196
Queue name: Officejet_Pro_6230
PPD file: drv:///hpcups.drv/hp-officejet_pro_6230.ppd
Location: Arbeitszimmer
Information: v1
---------------------
| PRINTER TEST PAGE |
---------------------
Would you like to print a test page (y=yes*, n=no, q=quit) ? y
warning: hp-testpage should not be run as root/superuser.
HP Linux Imaging and Printing System (ver. 3.22.10)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Unable to communicate with device (code=12): hp:/usb/Officejet_Pro_6230?serial=TH124BN196
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Done.
Viele Grüße
Robert
Reply to: