Hallo,
ich habe einen Desktop-PC mit Debain 12 bookworm. Seit heute
funktionieren kurz nach dem Einloggen die hinteren USB3 Ports nicht
mehr. Tastatur und Maus waren daran angeschlossen. Diese funktionierten
dann nicht mehr. Ich habe dann ein ssh auf den PC gemacht und die
Fehlerursache gesucht. Per ssh konnte ich ganz normal arbeiten. Ich habe
dann die Maus und die Tastatur an den vorderen USB-Ports angeschlossen
und dort funktioniert alles einwandfrei.
rolf@i7-5820K-debian:/etc$ cat debian_version
12.1
rolf@i7-5820K-debian:~$ uname -a
Linux i7-5820K-debian 6.1.0-10-amd64 #1 SMP PREEMPT_DYNAMIC Debian
6.1.38-1 (2023-07-14) x86_64 GNU/Linux
Es ist dieses Mainboard: MSI X99A SLI PLUS
rolf@i7-5820K-debian:~$ lspci | grep USB
00:14.0 USB controller: Intel Corporation C610/X99 series chipset USB
xHCI Host Controller (rev 05)
00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB
Enhanced Host Controller #2 (rev 05)
00:1d.0 USB controller: Intel Corporation C610/X99 series chipset USB
Enhanced Host Controller #1 (rev 05)
05:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0
Controller (rev 01)
06:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host
Controller
dmesg sagt u.a.:
[ 89.818921] DMAR: DRHD: handling fault status reg 2
[ 89.818933] DMAR: [DMA Read NO_PASID] Request device [05:00.0] fault
addr 0xfff96000 [fault reason 0x06] PTE Read access is not set
[ 89.819156] DMAR: DRHD: handling fault status reg 102
[ 89.819167] DMAR: [DMA Read NO_PASID] Request device [05:00.0] fault
addr 0xfff96000 [fault reason 0x06] PTE Read access is not set
[ 89.826918] DMAR: DRHD: handling fault status reg 202
[ 89.826926] DMAR: [DMA Read NO_PASID] Request device [05:00.0] fault
addr 0xfff96000 [fault reason 0x06] PTE Read access is not set
[ 89.826932] xhci_hcd 0000:05:00.0: WARNING: Host System Error
Mit google-Suche nach "xhci_hcd 0000:05:00.0: WARNING: Host System
Error" habe ich jemanden gefunden, der das gleiche Problem hatte:
https://forum.mechaenetia.com/t/gregs-computer-stuff/127/35
So here is the dmesg output for what happened, just for reference. This
happens a few seconds after plugging in ANY device into the Backside
Ports. The Device will work, and then this Error will eventually pop up
in dmesg and nothing will work on those Ports until after reboot.
[ 204.763891] xhci_hcd 0000:05:00.0: WARNING: Host System Error
[ 204.763934] xhci_hcd 0000:05:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT
domain=0x000f address=0xfeda5000 flags=0x0000]
Turns out this is a Kernel Issue, and I needed to disable “IOMMU” in the
UEFI. And now it just works.
It was a WTF Bug, but with the power of Linux and looking it up on the
Interwebz, I got it fixed.
Im UEFI habe ich bisher noch nichts geändert.
Mit bullseye hatte ich dieses Problem nicht.
Kann mir jemand helfen?