Hallo,
bis zum Update auf Bullseye hatte ich mit meinem Epson XP 3015 keine Probleme mit dem scannen.
Aber nun wird von Xsane kein Scanner gefunden.
# sudo
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If
the
# result is different from what you expected, first make sure
your
# scanner is powered up and properly connected to your
computer.
# No SCSI scanners found. If you expected something different,
make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x1136) at
libusb:005:002
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x0b05 [AsusTek Computer Inc.],
product=0x18f3 [AURA LED Controller]) at libusb:003:002
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not
be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other
proprietary ports
# can't be detected by this program.
Mit dmesg sehe ich aber:
--- [ 11.312128]
squashfs: version 4.0
(2009/01/31) Phillip Lougher
[
14.290568] igb
0000:03:00.0 enp3s0: igb: enp3s0
NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[
14.614146] IPv6:
ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[
18.076823] igb
0000:03:00.0 enp3s0: igb: enp3s0
NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[
1193.144386] usb 5-3: USB
disconnect, device number 2
[
1193.436708] usb 5-3: new
high-speed USB device number 4 using xhci_hcd
[
1193.772835] usb 5-3: device
descriptor read/64, error -71
[
1194.040110] usb 5-3: New USB
device found, idVendor=04b8, idProduct=1136, bcdDevice= 1.00
[
1194.040113] usb 5-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
[
1194.040115] usb 5-3: Product:
XP-3100 Series
[
1194.040116] usb 5-3:
Manufacturer: EPSON
[
1194.040117] usb 5-3:
SerialNumber: 5836424D3032343171
[
1194.104803] usblp 5-3:1.1: usblp1: USB
Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid
0x1136
[
1194.129736] usblp1: removed
[
1194.788611] usb 5-3: USB
disconnect, device number 4
[
1195.104742] usb 5-3: new
high-speed USB device number 5 using xhci_hcd
[
1195.292112] usb 5-3: New USB
device found, idVendor=04b8, idProduct=1136, bcdDevice= 1.00
[
1195.292116] usb 5-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
[
1195.292118] usb 5-3: Product:
XP-3100 Series
[
1195.292118] usb 5-3:
Manufacturer: EPSON
[
1195.292119] usb 5-3:
SerialNumber: 5836424D3032343171
[
1195.352791] usblp 5-3:1.1: usblp1: USB
Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid
0x1136
[
1195.378034] usblp1: removed
[
1195.760739] usb 5-3: USB
disconnect, device number 5
[
1198.724714] usb 5-3: new
high-speed USB device number 6 using xhci_hcd
[
1198.884364] usb 5-3: New USB
device found, idVendor=04b8, idProduct=1136, bcdDevice= 1.00
[
1198.884368] usb 5-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
[
1198.884369] usb 5-3: Product:
XP-3100 Series
[
1198.884370] usb 5-3:
Manufacturer: EPSON
[
1198.884371] usb 5-3:
SerialNumber: 5836424D3032343171
[
1198.936536] usblp 5-3:1.1: usblp1: USB
Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid
0x1136
[
1198.959569] usblp1: removed
Die Installation ist auch vorhanden wie in dieser Anleitung
beschrieben
https://wiki.ubuntuusers.de/Scanner/Epson/
Der Drucker/Scanner sagt mir wenn ich es von diesem aus versuche: Kommunikationsfehler, Verbindung überprüfen. Das USB Kabel hab ich schon an alle Möglichkeiten angesteckt mit selben Misserfolg.
An was kann es liegen?
-- Beste Grüße Sigi