[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

SPL: failed to boot from all boot devices - auf rock64 nach fehlerfreier Debian Installation



Hallo Debian Fans,

ich war auf die Performance Werte meines rock64 mit 4GB neugierig und
wollte deshalb dort ein Debian mit xfce installieren mit Kodi.
Falls das prima läuft, hätte ich diese Installation gegen die jetzige
unter libreelec mit Kodi Matrix abgelöst, da ich gerne auch mal im
Browser noch ein Film per Browser ansehen möchte, solange es in Kodi
nicht die passenden Addons (z.B. für Amazone Prime gibt).

Leider bekomme ich die Installation nicht ans laufen. Ich installiere
nach folgender Anleitung:
https://wiki.debian.org/InstallingDebianOn/Allwinner#Unsupported_Platforms

und nutze dabei die Variante: Installing from an SD card image
Mittels 'zcat firmware.rock64-rk3328.img.gz partition.img.gz > /dev/sdb'
wird dabei die SD Card vorbereitet.
Die Installation läuft auch fehlerfrei durch. Ich beachte dabei auch den
Hinweis: "Note that guided partitioning must be selected to use the
*whole* card and not only available space. Otherwise Debian installer
will not be removed from the card. To fix this then please use the
instruction for Creating a bootable SD Card with u-boot from above to
install a recent U-Boot version."
und nutze die gesamte SD Card in der geführten Installation als Ziel.
Leider wird mir auch nach dem 3. Versuch der Installation immer nach dem
fälligen Reboot am Ende der Installation folgender Fehler angezeigt:

-Boot TPL 2022.01+dfsg-1 (Jan 10 2022 - 22:07:13)
LPDDR3, 800MHz
BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=4096MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2022.01+dfsg-1 (Jan 10 2022 - 22:07:13 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

Wenn ich mir die zwei erstellten Partitionen von der SD Card anschaue,
sieht das auch alles recht brauchbar aus:
sdc                        8:32   1  14,9G  0 disk
├─sdc1                     8:33   1   487M  0 part
/media/heiko/5e99958e-85fc-4e20-bbdc-7ec8435f2c8f
├─sdc2                     8:34   1  13,4G  0 part
/media/heiko/5d3f1f69-e1e1-4624-99dc-c4ce2c677465
└─sdc3                     8:35   1   967M  0 part

ls -al /media/heiko/5e99958e-85fc-4e20-bbdc-7ec8435f2c8f
insgesamt 75405
drwxr-xr-x 4 root root     1024 Jan 18 20:23 .
drwxr-x--- 4 root root     4096 Jan 21 12:36 ..
-rw-r--r-- 1 root root     2226 Jan 18 20:23 boot.scr
-rw-r--r-- 1 root root     2226 Jan 18 20:00 boot.scr.bak
-rw-r--r-- 1 root root   265630 Dez 19 00:20 config-5.15.0-2-arm64
lrwxrwxrwx 1 root root       46 Jan 18 20:23 dtb ->
dtbs/5.15.0-2-arm64/rockchip/rk3328-rock64.dtb
lrwxrwxrwx 1 root root       46 Jan 18 20:23 dtb-5.15.0-2-arm64 ->
dtbs/5.15.0-2-arm64/rockchip/rk3328-rock64.dtb
drwxr-xr-x 3 root root     1024 Jan 17 00:16 dtbs
lrwxrwxrwx 1 root root       25 Jan 16 20:56 initrd.img ->
initrd.img-5.15.0-2-arm64
-rw-r--r-- 1 root root 48003203 Jan 18 20:23 initrd.img-5.15.0-2-arm64
lrwxrwxrwx 1 root root       25 Jan 16 20:56 initrd.img.old ->
initrd.img-5.15.0-2-arm64
drwx------ 2 root root    12288 Jan 16 20:47 lost+found
-rw-r--r-- 1 root root       83 Dez 19 00:20 System.map-5.15.0-2-arm64
lrwxrwxrwx 1 root root       22 Jan 16 20:56 vmlinuz ->
vmlinuz-5.15.0-2-arm64
-rw-r--r-- 1 root root 28614528 Dez 19 00:20 vmlinuz-5.15.0-2-arm64
lrwxrwxrwx 1 root root       22 Jan 16 20:56 vmlinuz.old ->
vmlinuz-5.15.0-2-arm64

 ls -al /media/heiko/5d3f1f69-e1e1-4624-99dc-c4ce2c677465
insgesamt 100
drwxr-xr-x  19 root root  4096 Jan 18 20:19 .
drwxr-x---   4 root root  4096 Jan 21 12:36 ..
lrwxrwxrwx   1 root root     7 Jan 16 20:48 bin -> usr/bin
drwxr-xr-x   2 root root  4096 Jan 16 20:47 boot
drwx------   2 root root  4096 Jan 17 00:01 .cache
drwxr-xr-x   4 root root  4096 Jan 16 20:49 dev
drwxr-xr-x 111 root root  4096 Jan 18 20:26 etc
drwxr-xr-x   3 root root  4096 Jan 17 00:19 home
lrwxrwxrwx   1 root root     7 Jan 16 20:48 lib -> usr/lib
drwx------   2 root root 16384 Jan 16 20:47 lost+found
drwxr-xr-x   2 root root  4096 Jan 16 20:47 media
drwxr-xr-x   2 root root  4096 Jan 16 20:49 mnt
drwxr-xr-x   2 root root  4096 Jan 16 20:49 opt
drwxr-xr-x   2 root root  4096 Aug 22 19:00 proc
drwx------   2 root root  4096 Jan 16 20:49 root
drwxr-xr-x   2 root root  4096 Jan 18 20:26 run
lrwxrwxrwx   1 root root     8 Jan 16 20:48 sbin -> usr/sbin
drwxr-xr-x   2 root root  4096 Jan 16 20:49 srv
drwxr-xr-x   2 root root  4096 Aug 22 19:00 sys
drwxrwxrwt   2 root root  4096 Jan 18 20:23 tmp
drwxr-xr-x  11 root root  4096 Jan 16 20:49 usr
drwxr-xr-x  11 root root  4096 Jan 16 20:49 var
-rw-------   1 root root  9392 Jan 18 20:19 .viminfo

fdisk -l /dev/sdc
Festplatte /dev/sdc: 59,64 GiB, 64021856256 Bytes, 125042688 Sektoren
Festplattenmodell: USB3.0 CRW   -SD
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: gpt
Festplattenbezeichner: 0E30AB16-CCBA-4BEF-9DA2-3718C9B5700C

Gerät         Anfang      Ende  Sektoren Größe Typ
/dev/sdc1       2048    999423    997376  487M Linux-Dateisystem
/dev/sdc2     999424 123039743 122040320 58,2G Linux-Dateisystem
/dev/sdc3  123039744 125040639   2000896  977M Linux Swap
D.h. auch der freie Platz am Anfang der SD Card wurde automatisch
berücksichtigt (oder sind 2048 Sektoren nicht genug ...)

Um Datenträger Probleme auszuschließen, wurden auch 2 verschiedene
funktionierende SD Cards genutzt. Ich habe auch schon per chroot ins
installierte System gewechselt und ein (fehlerfreies) update der initrd
durchgeführt - gebracht hat's nichts :-(

Zu dem Problem fand ich im Netz keine Lösung. da

Hat jemand einen Tip für mich? Die Install Logs habe ich gesichert,
finde darin aber selbst keine Fehler. Welchen
https://de.wikipedia.org/wiki/Pastebin Service könnt Ihr mir empfehlen,
falls jemand in Blick in die Logs werfen mag?

Oder doch einen Bug Report bei Debian aufmachen?


viele Grüße Heiko



Reply to: