Debian Testing - Hilfe bei der Auswertung von SMART
Hallo Liste,
auf meinem noch recht neuen Thinkpad Carbon X1 mit Debian Testing
bekomme ich seit letzten Donnerstag täglich eine Meldung mit einer
zunehmenden Anzahl nicht näher bezeichneten Einträgen für Fehler.
This message was generated by the smartd daemon running on:
host name: debian03
DNS domain: jens
The following warning/error was logged by the smartd daemon:
Device: /dev/nvme0, number of Error Log entries increased from 473 to
475
Device info:
SAMSUNG MZVLB1T0HALR-000L7, S/N:S3TPNX0K912413, FW:4L2QEXA7, 1.02 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Sun Oct 13 07:37:00
2019
CEST
Another message will be sent in 24 hours if the problem persists.
Auf der Suche was diese Fehler sein sollen komme ich allerdings nicht
weiter, denn die Ausgaben von smartctl stehen dazu nach meiner Meinung
im Widerspruch.
root@debian03:/home/jens# smartctl -H /dev/nvme0
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-1-amd64] (local
build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
root@debian03:/home/jens# smartctl -a /dev/nvme0
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-1-amd64] (local
build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVLB1T0HALR-000L7
Serial Number: S3TPNX0K912413
Firmware Version: 4L2QEXA7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 1.024.209.543.168 [1,02 TB]
Unallocated NVM Capacity: 0
Controller ID: 4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1.024.209.543.168 [1,02 TB]
Namespace 1 Utilization: 325.909.024.768 [325 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 8981bddced
Local Time is: Sun Oct 27 21:34:55 2019 CET
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero
Sav/Sel_Feat
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 82 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.02W - - 0 0 0 0 0 0
1 + 6.30W - - 1 1 1 1 0 0
2 + 3.50W - - 2 2 2 2 0 0
3 - 0.0760W - - 3 3 3 3 210 1200
4 - 0.0050W - - 4 4 4 4 2000 8000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 37 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 8.398.680 [4,30 TB]
Data Units Written: 13.226.557 [6,77 TB]
Host Read Commands: 47.529.271
Host Write Commands: 82.483.195
Controller Busy Time: 282
Power Cycles: 244
Power On Hours: 264
Unsafe Shutdowns: 77
Media and Data Integrity Errors: 0
Error Information Log Entries: 473
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 37 Celsius
Temperature Sensor 2: 38 Celsius
Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged
^^^^^^^^^^^^^^^^^
Was kann ich tun um diese 2 Aussagen in Übereinstimmung zu bringen?
--
Jens Liebmann
Reply to: