Re: iSCSI Target (LIO)
Liste alle aktuellen Sessions:
# iscsiadm -m session
tcp: [1] 192.168.90.239:3260,1033 iqn.1992-08.com.netapp:sn.62a9975d35cf11e5abb600a0985789e1:vs.6 (non-flash)
------------------------------
Zeige iSCSI Database bezüglich eingeloggter Sessions:
# iscsiadm -m session -o show -P 3
iSCSI Transport Class version 2.0-870
version 6.2.0.874-10
Target: iqn.1992-08.com.netapp:sn.62a9975d35cf11e5abb600a0985789e1:vs.6 (non-flash)
Current Portal: 192.168.90.239:3260,1033
Persistent Portal: 192.168.90.239:3260,1033
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1994-05.com.redhat:412deb1b2c62
Iface IPaddress: 192.168.4.4
Iface HWaddress: <empty>
Iface Netdev: <empty>
SID: 1
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
*********
Timeouts:
*********
Recovery Timeout: 5
Target Reset Timeout: 30
LUN Reset Timeout: 30
Abort Timeout: 15
*****
CHAP:
*****
username: mink
password: ***********
username_in: <empty>
password_in: *****************
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 1048576
ImmediateData: Yes
InitialR2T: Yes
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 3 State: running
scsi3 Channel 00 Id 0 Lun: 0
Attached scsi disk sdb State: running
Current Portal: 192.168.90.240:3260,1030
Persistent Portal: 192.168.90.240:3260,1030
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1994-05.com.redhat:412deb1b2c62
Iface IPaddress: 192.168.4.4
Iface HWaddress: <empty>
Iface Netdev: <empty>
SID: 2
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
*********
Timeouts:
*********
Recovery Timeout: 5
Target Reset Timeout: 30
LUN Reset Timeout: 30
Abort Timeout: 15
*****
CHAP:
*****
username: mink
password: **************
username_in: <empty>
password_in: ****************
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 1048576
ImmediateData: Yes
InitialR2T: Yes
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 4 State: running
scsi4 Channel 00 Id 0 Lun: 0
Attached scsi disk sdc State: running
------------------------------
Liste LUNS, die verbunden sind auf:
# lsscsi
[0:0:0:0] disk VMware Virtual disk 1.0 /dev/sda
[2:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0
[3:0:0:0] disk NETAPP LUN C-Mode 9400 /dev/sdb
[4:0:0:0] disk NETAPP LUN C-Mode 9400 /dev/sdc
On Thu, 2019-09-19 at 07:57 +0000, dirk.laurenz@ts.fujitsu.com wrote:
> Moin,
>
> wie kann ich einfach feststellen, dass mein iSCSI Target läuft?
> Da es ja Teil des Kernels ist, kann ich ja kaum auf einen Prozess gucken.
>
> Gruß,
>
> Dirk
Reply to: