Moin,
ich habe vor ein paar Wochen eine alte Intel X25m in meinen Fileserver
eingebaut (nur fürs OS). Seit dem kriege ich täglich solche Meldungen.
Gerne (aber nicht nur) um 04:00 Uhr rum, da läuft das Backup von dieser
Kiste.
Nov 23 04:05:06 jigsaw kernel: [2886256.092450] ata1: drained 512 bytes to clear DRQ
Nov 23 04:05:06 jigsaw kernel: [2886256.092473] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 23 04:05:06 jigsaw kernel: [2886256.096806] ata1.00: failed command: SMART
Nov 23 04:05:06 jigsaw kernel: [2886256.101174] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
Nov 23 04:05:06 jigsaw kernel: [2886256.101174] res 58/00:ff:08:4f:c2/00:00:00:00:00/00 Emask 0x2 (HSM violation)
Nov 23 04:05:06 jigsaw kernel: [2886256.109681] ata1.00: status: { DRDY DRQ }
Nov 23 04:05:06 jigsaw kernel: [2886256.114116] ata1.00: hard resetting link
Nov 23 04:05:06 jigsaw kernel: [2886256.426772] ata1.01: hard resetting link
Nov 23 04:05:06 jigsaw kernel: [2886256.888130] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 23 04:05:06 jigsaw kernel: [2886256.888155] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 23 04:05:06 jigsaw kernel: [2886256.907284] ata1.00: configured for UDMA/133
Nov 23 04:05:06 jigsaw kernel: [2886256.924371] ata1.01: configured for UDMA/133
Nov 23 04:05:06 jigsaw kernel: [2886256.944364] ata1: drained 512 bytes to clear DRQ
Nov 23 04:05:06 jigsaw kernel: [2886256.944384] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 23 04:05:06 jigsaw kernel: [2886256.948872] ata1.00: failed command: SMART
Nov 23 04:05:06 jigsaw kernel: [2886256.953173] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
Nov 23 04:05:06 jigsaw kernel: [2886256.953173] res 58/00:ff:0b:4f:c2/00:00:00:00:00/00 Emask 0x2 (HSM violation)
Nov 23 04:05:06 jigsaw kernel: [2886256.961790] ata1.00: status: { DRDY DRQ }
Nov 23 04:05:06 jigsaw kernel: [2886256.966330] ata1.00: hard resetting link
Nov 23 04:05:06 jigsaw kernel: [2886257.275060] ata1.01: hard resetting link
Nov 23 04:05:06 jigsaw kernel: [2886257.740090] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 23 04:05:06 jigsaw kernel: [2886257.740110] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 23 04:05:06 jigsaw kernel: [2886257.762110] ata1.00: configured for UDMA/133
Nov 23 04:05:06 jigsaw kernel: [2886257.781204] ata1.01: configured for UDMA/133
Kann jemand daraus ablesen, was da wahrscheinlich nicht stimmt?
Controller, Kabel, SSD?
Gruß,
Jochen.
--
I am getting worse rather than better.
[Agree] [Disagree]
<http://archive.slowlydownward.com/NODATA/data_enter2.html>
Attachment:
signature.asc
Description: Digital signature