kein sound in unstable
Hallo,
ich habe seit etwa zwei Wochen auf meinem mit Debian unstable
betriebenen Notebook (ein Thinkpad T520) das seltsame Verhalten, dass
kein Sound mehr aus den Lautsprechern kommt. Folgende Symptome:
- die Mute-Lampe im Mute-Schalter leuchtet ständig
- Betätigen des Mute-Schalters löst das richtige X-Event aus und wird
vom KDE in Unstable auch korrekt verarbeitet, in der Software
wechselt der Mute-Status ordentlich, die Lampe im Mute-Schalter
bleibt jedoch an.
- Wenn ich Dinge über pulseaudio abzuspielen versuche, schlagen die
Pegelanzeiger in pavucontrol aus
- speaker-test auf dmix:CARD=PCH,DEV=0 und hw:CARD=PCH,DEV=0 wirft
"Setting of hwparams failed: Invalid Argument"; speaker-test auf
plughw:CARD=PCH,DEV=0 bleibt stumm. Habe ich überhaupt das richtige
Device ausgewählt (siehe [1])? Kann das daran liegen dass pulseaudio
läuft? Wie kann ich pulseaudio darum bitten, das Device freizugeben?
Die Hardware ist in Ordnung, ein anderes Unstable auf der Hardware
(auch mit KDE, auch aktuell) macht brav Lärm.
Bevor ich jetzt hergehe und die Paketlisten der beiden Systeme
akribisch vergleiche, woran kann das liegen? Irgend eine Library
vielleicht? Kriegt man aus pulseaudio irgendwelche Debugging-Info
heraus?
Grüße
Marc
[1]
|[2/500]mh@swivel:~$ aplay --list-pcms
|default
| Playback/recording through the PulseAudio sound server
|null
| Discard all samples (playback) or generate zero samples (capture)
|sysdefault:CARD=PCH
| HDA Intel PCH, CX20590 Analog
| Default Audio Device
|front:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| Front speakers
|surround21:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 2.1 Surround output to Front and Subwoofer speakers
|surround40:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 4.0 Surround output to Front and Rear speakers
|surround41:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 4.1 Surround output to Front, Rear and Subwoofer speakers
|surround50:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 5.0 Surround output to Front, Center and Rear speakers
|surround51:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
|surround71:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
|hdmi:CARD=PCH,DEV=0
| HDA Intel PCH, HDMI 0
| HDMI Audio Output
|hdmi:CARD=PCH,DEV=1
| HDA Intel PCH, HDMI 1
| HDMI Audio Output
|hdmi:CARD=PCH,DEV=2
| HDA Intel PCH, HDMI 2
| HDMI Audio Output
|dmix:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| Direct sample mixing device
|dmix:CARD=PCH,DEV=3
| HDA Intel PCH, HDMI 0
| Direct sample mixing device
|dmix:CARD=PCH,DEV=7
| HDA Intel PCH, HDMI 1
| Direct sample mixing device
|dmix:CARD=PCH,DEV=8
| HDA Intel PCH, HDMI 2
| Direct sample mixing device
|dsnoop:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| Direct sample snooping device
|dsnoop:CARD=PCH,DEV=3
| HDA Intel PCH, HDMI 0
| Direct sample snooping device
|dsnoop:CARD=PCH,DEV=7
| HDA Intel PCH, HDMI 1
| Direct sample snooping device
|dsnoop:CARD=PCH,DEV=8
| HDA Intel PCH, HDMI 2
| Direct sample snooping device
|hw:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| Direct hardware device without any conversions
|hw:CARD=PCH,DEV=3
| HDA Intel PCH, HDMI 0
| Direct hardware device without any conversions
|hw:CARD=PCH,DEV=7
| HDA Intel PCH, HDMI 1
| Direct hardware device without any conversions
|hw:CARD=PCH,DEV=8
| HDA Intel PCH, HDMI 2
| Direct hardware device without any conversions
|plughw:CARD=PCH,DEV=0
| HDA Intel PCH, CX20590 Analog
| Hardware device with all software conversions
|plughw:CARD=PCH,DEV=3
| HDA Intel PCH, HDMI 0
| Hardware device with all software conversions
|plughw:CARD=PCH,DEV=7
| HDA Intel PCH, HDMI 1
| Hardware device with all software conversions
|plughw:CARD=PCH,DEV=8
| HDA Intel PCH, HDMI 2
| Hardware device with all software conversions
|[3/501]mh@swivel:~$ speaker-test -Ddmix:CARD=PCH,DEV=0
|
|speaker-test 1.1.1
|
|Playback device is dmix:CARD=PCH,DEV=0
|Stream parameters are 48000Hz, S16_LE, 1 channels
|Using 16 octaves of pink noise
|Sample format not available for playback: Invalid argument
|Setting of hwparams failed: Invalid argument
|[6/504]mh@swivel:~$ speaker-test -Dplughw:CARD=PCH,DEV=0 -l 1
|
|speaker-test 1.1.1
|
|Playback device is plughw:CARD=PCH,DEV=0
|Stream parameters are 48000Hz, S16_LE, 1 channels
|Using 16 octaves of pink noise
|Rate set to 48000Hz (requested 48000Hz)
|Buffer size range from 64 to 16384
|Period size range from 32 to 8192
|Using max buffer size 16384
|Periods = 4
|was set period_size = 4096
|was set buffer_size = 16384
| 0 - Front Left
|Time per period = 2,645442
|[7/505]mh@swivel:~$
--
-------------------------------------- !! No courtesy copies, please !! -----
Marc Haber | " Questions are the | Mailadresse im Header
Mannheim, Germany | Beginning of Wisdom " | http://www.zugschlus.de/
Nordisch by Nature | Lt. Worf, TNG "Rightful Heir" | Fon: *49 621 72739834
Reply to: