Nameserver 127.0.0.1 nach Wheezy update
Hello again,
nachdem ich meinen Squeeze Server auf Wheezy erneuert habe, habe ich nun
keinen Internet Zugang mehr, weil in der /etc/resolv.conf 127.0.0.1 drin
steht.
Habe alles abgesucht, aber ich weis nicht woher das kommt, denn:
----[ /etc/network/interfaces ]-----------------------------------------
auto lo
iface lo inet loopback
#=================== IPv4 ==============================================
auto eth0
iface eth0 inet static
address 78.47.104.44
netmask 255.255.255.240
network 78.47.104.32
broadcast 78.47.104.4
gateway 78.47.104.33
dns-nameserver 213.133.98.98 213.133.99.99 213.133.100.100
#up route add -net 78.47.104.44 netmask 255.255.255.240 gw 78.47.104.33 eth0
#=================== IPv6 ==============================================
iface eth0 inet6 static
address 2a01:04f8:0d13:c83:0000:0000:0000:0002
netmask 64
gateway 2a01:04f8:0d13:c83:0000:0000:0000:0001
#up ip -6 route add 2a01:04f8:0d13:c83:0000:0000:0000:0001 dev eth0
#down ip -6 route del 2a01:04f8:0d13:c83:0000:0000:0000:0001 dev eth0
#up ip -6 route add default 2a01:04f8:0d13:c83:0000:0000:0000:0001 dev eth0
#down ip -6 route del default 2a01:04f8:0d13:c83:0000:0000:0000:0001 dev eth0
------------------------------------------------------------------------
----[ /etc/dhcp/dhclient.conf ]-----------------------------------------
prepend domain-name-servers 213.133.98.98 213.133.99.99 213.133.100.100;
option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
netbios-name-servers, netbios-scope, interface-mtu,
rfc3442-classless-static-routes, ntp-servers;
------------------------------------------------------------------------
----[ /etc/resolvconf/resolv.conf.d/base ]------------------------------
nameserver 213.133.98.98
nameserver 213.133.99.99
nameserver 213.133.100.100
-------------------------------------------------------------------
Nun is die Frage, woher resolvconf das 127.0.0.1 her bekommt.
Das ist nirgends configuriert.
Irgendwelche ideen?
--
Michelle Konzack ITSystems
GNU/Linux Developer 0033-6-61925193
Reply to: