HP4630_Wheezy findet Scanner nicht
Hallo liebe Zeitgenossen,
ich benutze Wheezy 7.8 32Bit und habe mir kürzlich einen HP4630
All-in-one Drucker zugelegt (eigentlich heißt er 4632 und war als
solcher bei Aldi zu haben, unter der Haube steckt aber der bekannte
4630. Einziger Unterschied: 3 Jahre statt einem Garantie).
Nach der Installation mit 'Systemeinstellungen> Drucker> Drucker
hinzufügen' druckt er auch einwandfrei, nur der Scanner wird weder von
simplescan noch von xsane gefunden. Ich habe bereits 'hp-check' und
'hp-check --fix' laufen lassen, es wurden dabei fehlende und
unkompatible Komponenten ersetzt und die Gruppenzugehörigkeit
berichtigt, ohne Erfolg.
Die Suche hier in der Mailingliste hat mich nicht auf die richtige Spur
gebracht, ich muss auch gestehen, dass ich immer noch ein ziemlicher
Novize bin und manchmal nicht so richtig durchblicke. Ich arbeite aber
dran!
In der Anlage das Output von 'hp-check --fix' und 'lsusb'.
Kann mich jemand auf den richtigen Weg bringen?
Gruß
Frank
"Debian ist wie ein Mercedes-Benz aus den 60er oder 70er Jahren:
Zuverlässig, robust und gediegen.
Und: Immer in Rufweite hinter der Mode.
Schön, dass es das noch gibt."
"...Szene in den Kellergewölben des Mikroweich-Imperiums, wo die
Tastenolme im fahlen Licht ihrer Bildschirme jene kryptische Mixtur
zusammenhacken, die seit Jahr und Tag Tod und Verderben über das Land
bringt. Der Aufseher nähert sich geräuschlos dem Programmierer Mr.Simple
und legt ihm hinterrücks den schweren Griff seiner Peitsche auf die
Schulter: "Keep it stupid, Simple!"
fineweather@captain:~$ sudo hp-check --fix
[sudo] password for fineweather:
HP Linux Imaging and Printing System (ver. 3.12.6)
Dependency/Version Check Utility ver. 15
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are
installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied
package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check
both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Saving output in log file: /home/fineweather/hp-check.log
Initializing. Please wait...
warning: debian-7.8 version is not supported. Using debian-6.0.5 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u1 GNU/Linux
Host: captain
Proc: 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u1 GNU/Linux
Distribution: debian 7.8
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.12.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 7.8 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs Ghostscript REQUIRED 7.05 9.05 OK -
network Network-wget OPTIONAL - 1.13.4 OK -
dbus DBus REQUIRED - 1.6.8 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.22 OK -
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
cups CUPS REQUIRED 1.1 1.5.3 OK 'CUPS Scheduler is running'
-------------------------
| General Dependencies |
-------------------------
reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK -
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.3 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.13 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.3 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.9.3 OK -
cups-devel CUPS-SDK REQUIRED - 1.5.3 OK -
sane-devel SANE-SDK REQUIRED - 1.0.22 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.22 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.5.3 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.7.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 3.81 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.12.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.12.6 OK -
hpmudext IO-Extension REQUIRED - 3.12.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.12.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.12.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Officejet-4630-series
---------------------
Type: Unknown
Device URI: usb://HP/Officejet%204630%20series?serial=CN47V371T205Y0&interface=1
PPD: /etc/cups/ppd/Officejet-4630-series.ppd
PPD Description: HP Officejet 4620 Series, hpcups 3.12.6
Printer status: printer Officejet-4630-series is idle. enabled since Wed 04 Feb 2015 10:53:13 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
groups user-groups Required - - OK root lp lpadmin
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 1
Total Warnings: 1
Done.
fineweather@captain:~$
lsusb 5-2-2015
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc.
Bus 006 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 007 Device 002: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 001 Device 003: ID 03f0:c611 Hewlett-Packard
Reply to: