smartctl
Moin,
auf einem Lappi, der zeitweise ziemlichen Krach macht (den Ventilator hab' ich schon ausgetauscht), hab' ich die FP Ûberprüft, bin mir aber beim Auswerten des Tests nicht sicher:
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1246GSX
Serial Number: Z7BXF21US
Firmware Version: LB213J
User Capacity: 120 034 123 776 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 10 11:55:00 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1072
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2092
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 12457
10 Spin_Retry_Count 0x0033 141 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2088
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 42
193 Load_Cycle_Count 0x0032 014 014 000 Old_age Always - 869996
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 37 (Lifetime Min/Max 11/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 29
222 Loaded_Hours 0x0032 079 079 000 Old_age Always - 8461
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 344
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
General Purpose Logging (GPL) feature set supported
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 00% 12457 49930197
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 00% 12457 49930197
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Max Temperature: 46 Celsius
Lifetime Max Temperature: 48 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (104)
Index Estimated Time Temperature Celsius
105 2012-07-10 03:58 38 *******************
... ..( 24 skipped). .. *******************
130 2012-07-10 04:23 38 *******************
131 2012-07-10 04:24 39 ********************
... ..(103 skipped). .. ********************
235 2012-07-10 06:08 39 ********************
236 2012-07-10 06:09 38 *******************
... ..( 13 skipped). .. *******************
250 2012-07-10 06:23 38 *******************
251 2012-07-10 06:24 39 ********************
... ..( 31 skipped). .. ********************
283 2012-07-10 06:56 39 ********************
284 2012-07-10 06:57 40 *********************
... ..( 39 skipped). .. *********************
324 2012-07-10 07:37 40 *********************
325 2012-07-10 07:38 39 ********************
... ..(107 skipped). .. ********************
433 2012-07-10 09:26 39 ********************
434 2012-07-10 09:27 ? -
435 2012-07-10 09:28 25 ******
436 2012-07-10 09:29 26 *******
437 2012-07-10 09:30 28 *********
438 2012-07-10 09:31 28 *********
439 2012-07-10 09:32 28 *********
440 2012-07-10 09:33 29 **********
441 2012-07-10 09:34 29 **********
442 2012-07-10 09:35 29 **********
443 2012-07-10 09:36 30 ***********
444 2012-07-10 09:37 30 ***********
445 2012-07-10 09:38 30 ***********
446 2012-07-10 09:39 31 ************
... ..( 2 skipped). .. ************
449 2012-07-10 09:42 31 ************
450 2012-07-10 09:43 32 *************
... ..( 4 skipped). .. *************
455 2012-07-10 09:48 32 *************
456 2012-07-10 09:49 33 **************
... ..( 8 skipped). .. **************
465 2012-07-10 09:58 33 **************
466 2012-07-10 09:59 34 ***************
... ..( 6 skipped). .. ***************
473 2012-07-10 10:06 34 ***************
474 2012-07-10 10:07 35 ****************
... ..( 25 skipped). .. ****************
22 2012-07-10 10:33 35 ****************
23 2012-07-10 10:34 36 *****************
24 2012-07-10 10:35 36 *****************
25 2012-07-10 10:36 36 *****************
26 2012-07-10 10:37 37 ******************
27 2012-07-10 10:38 37 ******************
28 2012-07-10 10:39 38 *******************
29 2012-07-10 10:40 37 ******************
30 2012-07-10 10:41 37 ******************
31 2012-07-10 10:42 37 ******************
32 2012-07-10 10:43 38 *******************
33 2012-07-10 10:44 39 ********************
34 2012-07-10 10:45 40 *********************
35 2012-07-10 10:46 40 *********************
36 2012-07-10 10:47 41 **********************
37 2012-07-10 10:48 42 ***********************
38 2012-07-10 10:49 42 ***********************
39 2012-07-10 10:50 42 ***********************
40 2012-07-10 10:51 43 ************************
41 2012-07-10 10:52 43 ************************
42 2012-07-10 10:53 44 *************************
... ..( 2 skipped). .. *************************
45 2012-07-10 10:56 44 *************************
46 2012-07-10 10:57 45 **************************
... ..( 8 skipped). .. **************************
55 2012-07-10 11:06 45 **************************
56 2012-07-10 11:07 46 ***************************
... ..( 19 skipped). .. ***************************
76 2012-07-10 11:27 46 ***************************
77 2012-07-10 11:28 45 **************************
78 2012-07-10 11:29 45 **************************
79 2012-07-10 11:30 44 *************************
80 2012-07-10 11:31 43 ************************
81 2012-07-10 11:32 42 ***********************
82 2012-07-10 11:33 42 ***********************
83 2012-07-10 11:34 41 **********************
84 2012-07-10 11:35 41 **********************
85 2012-07-10 11:36 40 *********************
... ..( 2 skipped). .. *********************
88 2012-07-10 11:39 40 *********************
89 2012-07-10 11:40 39 ********************
... ..( 2 skipped). .. ********************
92 2012-07-10 11:43 39 ********************
93 2012-07-10 11:44 38 *******************
... ..( 9 skipped). .. *******************
103 2012-07-10 11:54 38 *******************
104 2012-07-10 11:55 37 ******************
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
============================
Wesentlich ist doch wohl "No Errors Logged"?
"smartctl -H" ergibt "PASSED".
Gruss
Klaus
Reply to: