Wlan in testing einrichten
Hallo,
seit Tagen beschäftige ich mich mit lesen von Anleitungen wie ich auf
einem Samsung S3 305E7A das Wlan zum laufen bekommen könnte. Ich habe
sehr vieles gefunden, aber nun weiss ich erst recht nicht mehr was ich
machen soll damit es geht.
Meine Fragen sind unter anderem wie stelle ich fest was mein
ssid="Netzwerkname" ist?
Mit welchen Tools soll ich es machen,
networkmanager-kde
wicd
wpasupplicant
Soll ich mit WPA2 oder WPA sichern?
Meine Daten die ich habe:
# rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
#############################################
# iwlist chan
lo no frequency information.
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
eth0 no frequency information.
# iwlist scan
lo Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 50:67:F0:82:65:31
Channel:9
Frequency:2.452 GHz (Channel 9)
Quality=70/70 Signal level=-33 dBm
Encryption key:on
ESSID:"WLAN_06"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000000dfa6b1b6
Extra: Last beacon: 408ms ago
IE: Unknown: 0007574C414E5F3036
IE: Unknown: 010582848B962C
IE: Unknown: 030109
IE: Unknown: 2A0100
IE: Unknown: 32080C1218243048606C
eth0 Interface doesn't support scanning.
##################
# lspci -nn
|--|
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
04:00.0 Network controller [0280]: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
####################
# lsmod
Module Size Used by
nls_utf8 12456 0
nls_cp437 16553 0
vfat 17316 0
fat 45642 1 vfat
usb_storage 43870 0
uas 13296 0
powernow_k8 17574 0
mperf 12453 1 powernow_k8
cpufreq_powersave 12454 0
cpufreq_stats 12866 0
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
parport_pc 22364 0
ppdev 12763 0
lp 17149 0
parport 31858 3 lp,ppdev,parport_pc
bnep 17567 2
rfcomm 33656 0
bluetooth 119406 10 rfcomm,bnep
uinput 17440 1
nfsd 211858 2
nfs 312191 0
nfs_acl 12511 2 nfs,nfsd
auth_rpcgss 37143 2 nfs,nfsd
fscache 36739 1 nfs
lockd 67328 2 nfs,nfsd
sunrpc 173671 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
loop 22641 0
snd_hda_codec_realtek 188748 1
snd_hda_codec_hdmi 30783 1
snd_hda_intel 26345 3
snd_hda_codec 78031 3
snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
arc4 12458 2
uvcvideo 57744 0
videodev 70889 1 uvcvideo
ath9k 73540 0
ath9k_common 12728 1 ath9k
v4l2_compat_ioctl32 16655 1 videodev
ath9k_hw 322017 2 ath9k_common,ath9k
media 18148 2 videodev,uvcvideo
ath 21370 3 ath9k_hw,ath9k_common,ath9k
snd_hwdep 13186 1 snd_hda_codec
psmouse 64455 0
mac80211 192768 1 ath9k
cfg80211 137140 3 mac80211,ath,ath9k
rfkill 19012 3 cfg80211,bluetooth
i2c_piix4 12536 0
i2c_core 23876 2 i2c_piix4,videodev
snd_pcm 63900 3
snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
serio_raw 12931 0
snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
evdev 17562 22
joydev 17266 0
pcspkr 12579 0
snd_seq 45093 0
snd_seq_device 13176 1 snd_seq
snd_timer 22917 2 snd_seq,snd_pcm
snd 52850 15
snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
ac 12624 0
k10temp 12611 0
soundcore 13065 1 snd
battery 13109 0
power_supply 13475 2 battery,ac
video 17628 0
processor 28106 3 powernow_k8
button 12937 0
ext4 350411 4
crc16 12343 2 ext4,bluetooth
jbd2 62015 1 ext4
mbcache 13065 1 ext4
dm_mod 63545 16
uvesafb 26146 0
cn 12947 2 uvesafb
usbhid 36379 0
hid 81288 1 usbhid
sr_mod 21899 0
cdrom 35401 1 sr_mod
sd_mod 36136 3
crc_t10dif 12348 1 sd_mod
thermal 17383 0
thermal_sys 18040 3 thermal,processor,video
ahci 24997 2
libahci 22860 1 ahci
libata 140589 2 libahci,ahci
ohci_hcd 22467 0
sdhci_pci 17976 0
sdhci 27053 1 sdhci_pci
ehci_hcd 40215 0
mmc_core 72460 2 sdhci,sdhci_pci
scsi_mod 162458 5 libata,sd_mod,sr_mod,uas,usb_storage
usbcore 128498 7
ehci_hcd,ohci_hcd,usbhid,uvcvideo,uas,usb_storage
usb_common 12354 1 usbcore
r8169 46980 0
--
Leider gelingt es mir bisher nicht das ich damit eine Verbindung
erhalte. Wahrscheinlich mache ich einen Fehler in der Konfigurierung. In
meiner Anleitung vom Router steht das ich das Passwort eingeben müsste,
aber bisher habe ich nicht gefunden wo oder wie ich das machen soll.
Ich wäre echt dankbar wenn mir wer helfen könnte, damit ich den Laptop
mit funktionierendem Wlan an die Besitzerin weitergeben kann. Ideal wäre
natürlich wenn er dann nicht nur bei mir sondern auch bei ihr und
anderswo ins Internet kommt.
Danke noch mal im voraus!
Einen Schönen Gruß,
Sigi
Reply to: