Re: WEB STICK S4011 kompatibel mit Lenny?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
So ein wenig bin ich jetzt schon wieder weitergekommen
Aber irgendwie habe ich das Gefühl das der ppp nicht gescheit
Funktioniert. Oder wie sieht das für euch aus?
Langsam sehe ich den Wald vor lauter Bäumen nicht mehr :-)
*************************************
root@debian:~/$ gcom -d /dev/ttyUSB0
*************************************
Enter PIN number: 0000
Waiting for Registration..(120 sec max).
Registered on Home network: "MEDION Mobile",2
Signal Quality: 14,99
***********************
root@debian:~/$ wvdial
***********************
- --> Ignoring malformed input line: ";Do NOT edit this file by hand!"
- --> WvDial: Internet dialer version 1.60
- --> Cannot get information for serial port.
- --> Initializing modem.
- --> Sending: ATZ
ATZ
OK
- --> Sending: AT&F
AT&F
OK
- --> Sending: AT+CSQ
AT+CSQ
+CSQ: 14,99
OK
- --> Sending: AT+CGDCONT=1,"IP","tagesflat.eplus.de"
AT+CGDCONT=1,"IP","tagesflat.eplus.de"
OK
- --> Modem initialized.
- --> Sending: ATM1L3DT*99#
- --> Waiting for carrier.
ATM1L3DT*99#
CONNECT
- --> Carrier detected. Starting PPP immediately.
- --> Starting pppd at Fri Sep 25 14:19:41 2009
- --> Pid of pppd: 29109
- --> Disconnecting at Fri Sep 25 14:19:41 2009
- --> The PPP daemon has died: pppd options error (exit code = 2)
- --> man pppd explains pppd error codes in more detail.
- --> I guess that's it for now, exiting
- --> The PPP daemon has died. (exit code = 2)
******************************
Inhalt meiner /etc/wvdial.conf
******************************
[Dialer Defaults]
Modem = /dev/ttyUSB0
ISDN = off
Modem Type = USB Modem
Baud = 460800
Init = ATZ
Init2 = AT&F
Init3 = AT+CSQ
Init4 = AT+CGDCONT=1,"IP","tagesflat.eplus.de"
Init5 =
Init6 =
Init7 =
Init8 =
Init9 =
Phone = *99#
Phone1 =
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM1L3DT
Ask Password = off
Password = gprs
Username = eplus
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = off
;Do NOT edit this file by hand!
******************************
Inhalt meiner /etc/ppp/options
******************************
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
******************************
Inhalt meiner /etc/ppp/pap-secrets
******************************
# Every regular user can use PPP and has to use passwords from /etc/passwd
* hostname "" *
# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
# other accounts that should not be able to use pppd!
guest hostname "*" -
master hostname "*" -
root hostname "*" -
support hostname "*" -
stats hostname "*" -
# Here you should add your userid password to connect to your providers via
# PAP. The * means that the password is to be used for ANY host you connect
# to. Thus you do not have to worry about the foreign machine name. Just
# replace password with your password.
# If you have different providers with different passwords then you better
# remove the following line.
# * password
eplus * gprs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=s0DO
-----END PGP SIGNATURE-----
Reply to: