Monitor-Auflösung nach Neustart verändert?
Hallo zusammen,
stehe vor einem Rätsel, nach Start des Rechners hat sich heute Morgen
die Auflösung von 1280x1024 nach 800x600 verändert.
Es werden keine besseren Auflösungsmöglichkeiten angeboten.
Die xorg.conf lässt auch keine Rückschlüsse zu.
Das System "Lenny" mit NVidia-Grafikkarte und TFT-Monitor.
Ein "nvidia-xconfig" ergab:
+++++++
boss:/home/heiner# nvidia-xconfig
Using X configuration file: "/etc/X11/xorg.conf".
VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf.
Device section "Configured Video Device" must have a
Driver line.
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
boss:/home/heiner#
++++++++
Die "xorg.conf" mit kernel 2.6.26-1 sieht wie folgt aus:
++++++++
/# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@ninsei) Fri Sep 5 22:23:08 UTC
2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
++++++++++++
Die Fragen, die ich mir nicht beantworten kann sind:
Warum verstellt sich die bislang funktionierende Auflösung von
1280X1024, über
Nacht und ohne irgendwelches Zutun, auf 800x600.
Wie bekomme ich den Urzustand wieder hin?
Im voraus schon vielen Dank,
viele Grüße
Heiner
*********************************************
Heiner Gewiehs * Marketg-Fachkaufm.
info_ät_gewiehs_dot.de
www.buergerliche.org
*********************************************
/
Reply to: