[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

smartctl: "Aborted by host" trotz "Completed without error" Firmwarebug Samsung ?



Hallo Debianer !

Seit längerem habe ich grössere Probleme mit den Festplatten unseres Root Servers. Deshalb habe ich mich natürlich ausgiebig mit den smartmontools beschäftigt. Die Ausgabe dieser verwirrt mich jedoch bei folgendem Sachverhalt. Ich habe mehrmals die Selftests laufen lassen (long) um zu sehen ob alles noch ok ist, da die Festplatte mich öfter mit pending sectors überraschte. Die ausgabe beim testen sieht dann ungefähr so aus:

smartctl -l selftest -d ata /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 3557 - # 2 Extended offline Aborted by host 00% 3546 - # 3 Extended offline Aborted by host 00% 3541 - # 4 Extended offline Aborted by host 00% 3536 -

nachdem der test abgeschlossen ist, sieht das so aus:

smartctl -l selftest -d ata /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3557 - # 2 Extended offline Aborted by host 00% 3546 - # 3 Extended offline Aborted by host 00% 3541 - # 4 Extended offline Aborted by host 00% 3536 -

Soweit ok ! Doch nun nach einem neuen Test siehts dann so aus:

smartctl -l selftest -d ata /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 3560 -
# 2  Extended offline    Aborted by host       00%      3557         -
# 3 Extended offline Aborted by host 00% 3546 - # 4 Extended offline Aborted by host 00% 3541 - # 5 Extended offline Aborted by host 00% 3536 -

Der erfolgreiche Test von Stunde 3557 ist nun "aborted by host" ?
Weitere Frage, was bedeuted diese Warnung von wegen "requires self-test log structure revision =1"

Um noch mehr Informationen zu geben hier mal ein:

smartctl -d ata -a /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HD502IJ
Serial Number:    S13TJ1NQ800498
Firmware Version: 1AA01113
User Capacity:    500,107,862,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Not recognized. Minor revision code: 0x52
Local Time is:    Wed Mar  4 10:17:18 2009 CET

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                       was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 248) Self-test routine in progress...
                                       80% of test remaining.
Total time to complete Offline
data collection:                 (7815) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
                                       Suspend Offline collection upon new
                                       command.
                                       Offline surface scan supported.
                                       Self-test supported.
                                       Conveyance Self-test supported.
                                       Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                       power-saving mode.
                                       Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                       General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 131) minutes.
Conveyance self-test routine
recommended polling time:        (  14) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 098 051 Pre-fail Always - 4 3 Spin_Up_Time 0x0007 093 093 011 Pre-fail Always - 3190 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 8503 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3557 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11 13 Read_Soft_Error_Rate 0x000e 100 098 000 Old_age Always - 4 183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 184 Unknown_Attribute 0x0033 100 100 099 Pre-fail Always - 0 187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 629 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x0022 064 060 000 Old_age Always - 672989220 194 Temperature_Celsius 0x0022 063 058 000 Old_age Always - 37 (Lifetime Min/Max 0/10781) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 31456051 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 80% 3557 - ########################## alle 00% Einträge waren "completed without error" !!! # 2 Extended offline Aborted by host 00% 3552 - ########################## alle 00% Einträge waren "completed without error" !!! # 3 Extended offline Aborted by host 00% 3546 - ########################## alle 00% Einträge waren "completed without error" !!! # 4 Extended offline Aborted by host 00% 3541 - ########################## alle 00% Einträge waren "completed without error" !!! # 5 Extended offline Aborted by host 00% 3536 - ########################## alle 00% Einträge waren "completed without error" !!! # 6 Short offline Aborted by host 00% 3532 - ########################## alle 00% Einträge waren "completed without error" !!! # 7 Extended offline Aborted by host 00% 3528 - ########################## alle 00% Einträge waren "completed without error" !!! # 8 Extended offline Aborted by host 00% 3522 - ########################## alle 00% Einträge waren "completed without error" !!! # 9 Extended offline Aborted by host 00% 3517 - #10 Extended offline Aborted by host 00% 3512 - #11 Extended offline Aborted by host 00% 3504 - #12 Extended offline Aborted by host 00% 3500 - #13 Extended offline Aborted by host 00% 3493 - #14 Extended offline Aborted by host 00% 3488 - #15 Extended offline Aborted by host 00% 3482 - #16 Extended offline Aborted by host 00% 3386 - #17 Extended offline Aborted by host 00% 3058 - #18 Extended offline Aborted by host 80% 3056 - #19 Extended offline Aborted by host 00% 3031 - #20 Extended offline Aborted by host 90% 3003 - #21 Extended offline Aborted by host 90% 3002 -

SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Und hier nocheinmal die Version meiner smartmontools:

dpkg -p smartmontools

Package: smartmontools
Priority: optional
Section: utils
Installed-Size: 656
Maintainer: Guido Guenther <agx@sigxcpu.org>
Architecture: amd64
Version: 5.36-8
Depends: libc6 (>= 2.3.5-1), debianutils (>= 2.2), lsb-base (>= 3.0-10)
Recommends: mailx | mailutils
Conflicts: smartsuite, ucsc-smartsuite
Filename: pool/main/s/smartmontools/smartmontools_5.36-8_amd64.deb
Size: 270302
MD5sum: 23c39dae8e07b758eb44d59ac795df55
Description: control and monitor storage systems using S.M.A.R.T.
The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI
hard disks. It is derived from the smartsuite package, and includes support
for ATA/ATAPI-5 disks. It should run on any modern Linux system.
SHA1: 769dbe443ca57c5a4a61f6084e37e4feaafa69a7
SHA256: 621b26b6f8a07e89e9534cb1ceeb4da26d130580904f76b1a2b641b84b518d7c
Tag: admin::monitoring, hardware::storage, interface::daemon, network::server, role::program, use::monitor







Reply to: