Re: Partition nicht erreichbar

[klaus zerwes <kzerwes@web.de>]

Wolf Wiegand schrieb:
> Hallo,

Morgen

[...]
> 
> $ dmesg | grep sda
> [    4.942019] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> [    4.942019] sd 0:0:1:0: [sda] Write Protect is off
> [    4.942019] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
> [    4.942019] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    4.947526] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> [    4.949723] sd 0:0:1:0: [sda] Write Protect is off
> [    4.949784] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
> [    4.954981] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    4.954981]  sda: sda1
> [    4.954982] sd 0:0:1:0: [sda] Attached SCSI disk
> [    7.062466] md: bind<sda>
> [    7.077184] raid0: looking at sda
> [    7.077184] raid0:   comparing sda(156290816) with sda(156290816)
> [    7.077323] md: unbind<sda>
> [    7.077381] md: export_rdev(sda)

Äh ... was macht md da?

> $ fdisk -l /dev/sda | grep LVM
> /dev/sda1               1       19457   156288321   8e  Linux LVM

lass mal das grep dahinter weg.

[...]
> 
> Danke -

gibt noch nichts zu danken ;-)

>  Wolf

Klaus


-- 
Klaus Zerwes
http://www.zero-sys.net