Hallo Leute, ich wollte gerade ein aptitude dist-upgrade fahren, da bekam ich Fehlremeldungen von aptitude zurück das aptitute nicht schreiben kann wegen der HD (sinngemäß). Ich habe mir mal die syslog angeschaut und nach diesem konnte ich mein System nur noch ausschalten. Von außen über ssh war es nicht mehr ansprechbar. Wechsel auf strg+alt+F1 brachte nur einen rennenden Bildschirm mit smartmeldungen. Hier ein Auszug aus der Syslog. Oct 1 07:22:18 pinguinstall smartd[3110]: Device: /dev/sda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 253 to 100 Oct 1 07:22:18 pinguinstall smartd[3110]: Device: /dev/sda, SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 187 to 139 Oct 1 07:22:18 pinguinstall smartd[3110]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 187 to 139 Oct 1 07:22:18 pinguinstall smartd[3110]: Device: /dev/sda, SMART Usage Attribute: 200 Multi_Zone_Error_Rate changed from 253 to 100 Oct 1 07:46:03 pinguinstall kernel: [ 3257.028096] ata1.00: cmd 35/00:c8:a3:a9:68/00:01:0c:00:00/e0 tag 0 dma 233472 out Oct 1 07:46:03 pinguinstall kernel: [ 3257.028100] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Oct 1 07:46:03 pinguinstall kernel: [ 3257.028106] ata1.00: status: { DRDY } Oct 1 07:46:08 pinguinstall kernel: [ 3262.076124] ata1: link is slow to respond, please be patient (ready=0) Oct 1 07:46:13 pinguinstall kernel: [ 3267.060659] ata1: soft resetting link Oct 1 07:46:14 pinguinstall kernel: [ 3267.416442] ata1.00: configured for UDMA/133 Oct 1 07:46:14 pinguinstall kernel: [ 3267.416466] ata1: EH complete Oct 1 07:46:14 pinguinstall kernel: [ 3267.419400] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Oct 1 07:46:14 pinguinstall kernel: [ 3267.419587] sd 0:0:0:0: [sda] Write Protect is off Oct 1 07:46:14 pinguinstall kernel: [ 3267.419596] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 1 07:46:14 pinguinstall kernel: [ 3267.430402] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 1 07:52:19 pinguinstall smartd[3110]: Device: /dev/sda, SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 139 to 118 Oct 1 07:52:19 pinguinstall smartd[3110]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 139 to 118 Bin ein wenig Ratlos. Wie kann ich ansetzen. Nach dem Neustart scheint jetzt wieder Ruhe zu sein. Gibt es denn keine Möglichkeit smartd so zu konfigurieren, das wenn etwas wirklich wichtiges auftritt, das man ne Mail bekommt? Danke Dirk
Attachment:
signature.asc
Description: PGP signature