Re: Memory-Upgrade 2GB->4GB korrekt?
Hallo Andre,
Am Donnerstag, 12. Juni 2008 17:41:25 schrieb Andre Bischof:
> Frank Störzer schrieb:
> ...
>
> >> Andersherum kurz gefragt: Wenn ich auf meinem bestehenden
> >> 32Bit-Debian-Testing den linux-image-2.6.24-1-amd64 installiere,
> >> sollte das grundsätzlich laufen, richtig? 64Bit-Kernel,
> >> 32Bit-Userland?
> >
> > sollte, habe aber selber keine Erfahrung mit dieser Konfiguration.
>
> Hm, leider klappt das nicht, oder ich verstehe etwas falsch. Ich habe
> sowohl den amd64- als auch den bigmem-Kernel installiert, beide
> adressieren nicht die vollen 4GB. Muß ich noch was im Bios umstellen?
Schuss ins Blaue: Schau mal nach, ob es eine Einstellung fürs
Memory-Remapping im BIOS gibt. Einen anderen Grund, warum nicht mehr
als 3,25GB beim amd64 erkannt werden kann ich mir sonst nicht
vorstellen.
>
> Hier die relevanten Informationen:
>
> ----------------------
> root@linux:~# uname -r
> 2.6.24-1-amd64
> ----------------------
>
> root@linux:~# hwinfo --memory
> 01: None 00.0: 10102 Main Memory
> ...
> Memory Size: 3 GB + 256 MB
> Config Status: cfg=new, avail=yes, need=no, active=unknown
>
> top:
> Mem: 3356620k total
>
> root@linux:~# cat /proc/meminfo
> MemTotal: 3356620 kB
>
>
> ----------------------
> root@linux:~# uname -r
> 2.6.24-1-686-bigmem
> ----------------------
>
> root@linux:~# hwinfo --memory
> 01: None 00.0: 10102 Main Memory
> [Created at memory.61]
> Unique ID: rdCR.CxwsZFjVASF
> Hardware Class: memory
> Model: "Main Memory"
> Memory Range: 0x00000000-0xce1e3fff (rw)
> Memory Size: 3 GB + 256 MB
> Config Status: cfg=new, avail=yes, need=no, active=unknown
>
> top:
> Mem: 3377040k total
>
> root@linux:~# cat /proc/meminfo
> MemTotal: 3377040 kB
>
>
> Jemand eine Idee?
Außer das nicht aktivierte Memory-Remap keine ...
>
> Andre
>
Gruß
Frank
Reply to: