Re: [SMARTD] Currently unreadable (pending) sectors

[Peter Jordan <usernetwork@gmx.info>]

Updates:

seit heute nacht liefert smartctl -A -d ata /dev/sdb unter anderem folendes:

SMART Error Log Version: 1
ATA Error Count: 3
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 348 hours (14 days + 12 hours)
  When the command that caused the error occurred, the device was active
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1d 7e ff 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 20 3e 81 ff 08 08      03:55:18.922  [RESERVED FOR SERIAL ATA]
  60 00 18 be 7e ff 08 08      03:55:18.921  [RESERVED FOR SERIAL ATA]
  60 00 10 be 7c ff 08 08      03:55:18.921  [RESERVED FOR SERIAL ATA]
  60 00 08 be 81 ff 08 08      03:55:18.921  [RESERVED FOR SERIAL ATA]
  60 80 00 be 80 ff 08 08      03:55:18.921  [RESERVED FOR SERIAL ATA]


Der Fehler wiederholt sich noch zweimal.

Was hast das zu bedeuten?

PJ