Re: Etch-AMD64 Kernel und Probleme mit SB600 Chipsatz?

[Markus Schulz <msc@antzsystem.de>]

Am Donnerstag, 13. März 2008 schrieb Markus Schulz:
[...]
> Syslog:

Habe etwas unterschlagen bei der Syslog Ausgabe, es fehlt noch:

Mar 13 18:00:46 st90 mdadm: Fail event detected on md device /dev/md1, 
component device /dev/sda2
Mar 13 18:01:14 st90 kernel: ata1.00: limiting speed to UDMA/33
Mar 13 18:01:14 st90 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 
0x0 action 0x2 frozen
Mar 13 18:01:14 st90 kernel: ata1.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 
err 0x0 (timeout)
Mar 13 18:01:14 st90 kernel: ata1: soft resetting port
Mar 13 18:01:14 st90 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 
SControl 300)
Mar 13 18:01:15 st90 kernel: ata1.00: configured for UDMA/33
Mar 13 18:01:15 st90 kernel: ata1: EH complete
Mar 13 18:01:45 st90 kernel: ata1.00: limiting speed to UDMA/25
Mar 13 18:01:45 st90 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 
0x0 action 0x2 frozen
Mar 13 18:01:45 st90 kernel: ata1.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 
err 0x0 (timeout)
Mar 13 18:01:45 st90 kernel: ata1: soft resetting port
Mar 13 18:01:46 st90 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 
SControl 300)
Mar 13 18:01:47 st90 kernel: ata1.00: configured for UDMA/25
Mar 13 18:01:47 st90 kernel: ata1: EH complete
Mar 13 18:01:47 st90 kernel: SCSI device sda: 781422768 512-byte hdwr 
sectors (400088 MB)
Mar 13 18:02:17 st90 kernel: ata1.00: limiting speed to UDMA/16
Mar 13 18:02:17 st90 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 
0x0 action 0x2 frozen
Mar 13 18:02:17 st90 kernel: ata1.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 
err 0x0 (timeout)
Mar 13 18:02:17 st90 kernel: ata1: soft resetting port
Mar 13 18:02:17 st90 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 
SControl 300)
Mar 13 18:02:18 st90 kernel: ata1.00: configured for UDMA/16
Mar 13 18:02:18 st90 kernel: ata1: EH complete
Mar 13 18:02:18 st90 kernel: sda: Write Protect is off
Mar 13 18:02:18 st90 kernel: sda: Mode Sense: 00 3a 00 00
Mar 13 18:02:48 st90 kernel: ata1.00: limiting speed to PIO4
Mar 13 18:02:48 st90 kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 
0x0 action 0x2 frozen
Mar 13 18:02:48 st90 kernel: ata1.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 
err 0x0 (timeout)
Mar 13 18:02:49 st90 kernel: ata1: soft resetting port
Mar 13 18:02:49 st90 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 
SControl 300)
Mar 13 18:02:50 st90 kernel: ata1.00: configured for PIO4
Mar 13 18:02:50 st90 kernel: ata1: EH complete
Mar 13 18:02:50 st90 kernel: SCSI device sda: drive cache: write back
Mar 13 18:02:50 st90 kernel: SCSI device sda: 781422768 512-byte hdwr 
sectors (400088 MB)
Mar 13 18:02:50 st90 kernel: sda: Write Protect is off
Mar 13 18:02:50 st90 kernel: sda: Mode Sense: 00 3a 00 00
Mar 13 18:02:50 st90 kernel: RAID1 conf printout:
Mar 13 18:02:50 st90 kernel:  --- wd:1 rd:2
Mar 13 18:02:50 st90 kernel:  disk 0, wo:1, o:0, dev:sda2
Mar 13 18:02:50 st90 kernel:  disk 1, wo:0, o:1, dev:sdb2
Mar 13 18:02:50 st90 kernel: SCSI device sda: drive cache: write back
Mar 13 18:02:50 st90 kernel: RAID1 conf printout:
Mar 13 18:02:50 st90 kernel:  --- wd:1 rd:2
Mar 13 18:02:50 st90 kernel:  disk 1, wo:0, o:1, dev:sdb2

-- 
Markus Schulz

"One disk to rule them all, One disk to find them. One disk to bring 
them all and in the darkness grind them. In the Land of Redmond where 
the shadows lie." -- The Silicon Valley Tarot   Henrique Holschuh