xinerama-Konfiguration
Etch
KDE 3.5.5
Xserver-xorg
Notebook Latitude D520
Hallo Liste,
ich bekomme es nicht hin, dass ich das Beamerbild und das LCD-Display im
Notebook gleichzeitig sehe.
Wenn ich das Notebook starte, liegt das Videosignal so an, dass offensichtlich
beide Ausgänge bedient werden sollen, aber es kommt kein Bild. Erst mit der
FN+F8-Taste kann ich umschalten und bekomme aber dann ein Bild 480x640
entweder auf dem Beamer oder dem Display.
Wunschvorstellung wäre, dass der Rechner einfach in dem Modus startet, dass
beide Ausgänge mit 1024x768 versorgt werden.
Danke barmherzige für Unterstützung.
Bernd Kloss
================================================
================================================
Aus der Xorg.0.log:
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated
Graphics Controller rev 3, Mem @ 0xeff00000/19, 0xd0000000/28, 0xefec0000/18,
I/O @ 0xeff8/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated
Graphics Controller rev 3, Mem @ 0xeff80000/19
(II) Addressable bus resource ranges are
.......
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
.......
(WW) I810(0): Bad V_BIOS checksum
(WW) I810(0): Invalid Monitor type specified for Pipe B
(WW) I810(0): Bad V_BIOS checksum
(WW) I810(0): Primary Pipe has been switched from original pipe (B to A)
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size:
(720,400)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size:
(1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE,
present: TRUE, size: (1627,0)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present:
TRUE, size: (1024,768)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present:
FALSE, size: (0,2063)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE,
size: (0,2063)
(II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE,
present: FALSE, size: (0,2063)
(II) I810(0): Display Info: LFP2 (second local flat panel): attached: FALSE,
present: FALSE, size: (0,2063)
(II) I810(0): Currently active displays on Pipe A:
(II) I810(0): CRT
(II) I810(0): No active displays on Pipe B.
(==) I810(0): Display is using Pipe A
(--) I810(0): Maximum frambuffer space: 65368 kByte
.......
(WW) I810(0): Direct rendering is not supported when Xinerama is enabled
(EE) I810(0): [dri] DRIScreenInit failed. Disabling DRI.
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(EE) AIGLX: Screen 0 is not DRI capable
(WW) I810(0): Changing XVideo pipe (0 to 1).
=========================================================
=========================================================
Die xorg.conf:
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
# Option "Emulate3Buttons" "true"
# neue Eintraege
Option "BaudRate" "1200"
Option "SampleRate" "60"
Option "ZAxisMapping" "4 5" # scrollrad
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "Intel-LCD" #Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller 1
Driver "i810"
BusID "PCI:0:2:0"
Option "MonitorLayout" "CRT, LFP"
Screen 0
EndSection
Section "Device"
Identifier "Intel-Beamer" #Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller 2
Driver "i810"
BusID "PCI:0:2:1"
Option "MonitorLayout" "CRT, LFP"
Option "Display" "CRT"
Screen 1
EndSection
Section "Monitor"
Identifier "LCD"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Beamer"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Notebook LCD"
Device "Intel-LCD"
Monitor "LCD"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Notebook Beamer"
Device "Intel-Beamer"
Monitor "Beamer"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Dual Head (Xinerama) Layout"
Screen 0 "Notebook LCD"
Screen 1 "Notebook Beamer"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "ServerFlags"
Option "Xinerama" "true"
EndSection
Section "DRI"
Mode 0666
EndSection
Reply to: