Cups will nicht mehr
Hallo,
ich habe das Problem unter Etch, dass Cups nicht mehr will (nach
irgendwelche Upgrades).
Der Drucker ist an usb angeschlossen. Der Drucker wird erkannt,
Kernel-seitig funktioniert ein
# cat foo.ps >/dev/usb/lp0
# lsusb -s 004
Bus 001 Device 004: ID 04f9:0022 Brother Industries, Ltd
Cups meldet in der Admin-Page nur "Printer not connected; will retry in
30 seconds..."
Cups kennt auch prinzipiell USB-Drucker:
# lpinfo -v
network socket
network beh
network http
network ipp
network lpd
direct parallel:/dev/lp0
direct scsi
serial serial:/dev/ttyS0?baud=115200
serial serial:/dev/ttyS1?baud=115200
network smb
Also, denke ich sollte ein
# lpadmin -p hl5150d -v usb://Brother/HL-5150D%20series
das Device entsprechend setzen:
# lpstat -v
device for hl5150d: usb://Brother/HL-5150D%20series
device for hl5150ddbl: usb://Brother/HL-5150D%20series
device for Virtual_Printer: cups-pdf:/
Nur, es kommt nix. Irgend was stimmt mit der DeviceURI nicht.
# grep DeviceURI /etc/cups/printers.conf
DeviceURI usb://Brother/HL-5150D%20series
DeviceURI usb://Brother/HL-5150D%20series
DeviceURI cups-pdf:/
Hat wer einen Tipp?
TIA -- Peter
--
Peter.Weiss@consol.de ConSol* Software GmbH
Phone +49 89 45841-100 Consulting & Solutions
Mobile +49 177 6040121 Franziskanerstr. 38
http://www.consol.de D-81669 München
Reply to: