udev nach Update auf Sarge
Hallo,
seit meinem Updateversuch von etch auf sarge funktionieren meine
udev-Regeln nicht mehr.
Ich habe versucht, die Syntax auf die neuen Gegebeheiten anzupassen. Die
Regeln stehen im Original natürlich jeweils in einer Zeile.
>>>>>>>> cat /etc/udev/media.rules
KERNEL=="fd0", SYMLINK+="media/floppy"
KERNEL=="hdb", SYMLINK+="media/dvd-rom"
KERNEL=="hdd", SYMLINK+="media/dvd-ram"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="223 U HS-CF",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-cf/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="223 U HS-CF",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-cf/part%n"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="223 U HS-MS",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-ms/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="223 U HS-MS",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-ms/part%n"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="223 U HS-SM",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-sm/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="223 U HS-SM",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-sm/part%n"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="223 U HS-SD/MMC",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-sdmmc/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="223 U HS-SD/MMC",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/card-sdmmc/part%n"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="00BB-00KEA0",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/usb-backup/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="00BB-00KEA0",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/usb-backup/part%n"
BUS=="usb", KERNEL=="sd?", SYSFS{model}=="1600BB External",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/usb-harddisk/disc"
BUS=="usb", KERNEL=="sd??*", SYSFS{model}=="1600BB External",
SUBSYSTEM=="block", NAME{all_partitions}=="%k",
SYMLINK+="media/usb-harddisk/part%n"
BUS=="usb", KERNEL=="sd?", SUBSYSTEM=="block",
NAME{all_partitions}=="%k", SYMLINK+="media/usb-storage/disc"
BUS=="usb", KERNEL=="sd??*", SUBSYSTEM=="block",
NAME{all_partitions}=="%k", SYMLINK+="media/usb-storage/part%n"
Laut udevtest müssten jedoch, hier z.B. für fd0, Symlinks erzeugt
werden. /etc/init.d/udev restart bleibt jedoch erfolglos.
>>>>>>>> udevtest /sys/block/fd0
parse_file: reading '/etc/udev/rules.d/00media.rules' as rules file
parse_file: reading '/etc/udev/rules.d/020_permissions.rules' as rules file
parse_file: reading '/etc/udev/rules.d/025_libgphoto2.rules' as rules file
parse_file: reading '/etc/udev/rules.d/025_libsane-extras.rules' as
rules file
parse_file: reading '/etc/udev/rules.d/025_libsane.rules' as rules file
parse_file: reading '/etc/udev/rules.d/025_logitechmouse.rules' as rules
file
parse_file: reading '/etc/udev/rules.d/11-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/20compat-full.rules' as rules file
parse_file: reading '/etc/udev/rules.d/30devfs.rules' as rules file
parse_file: reading '/etc/udev/rules.d/libnjb.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z20_persistent-input.rules' as
rules file
parse_file: reading '/etc/udev/rules.d/z20_persistent.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z25_persistent-cd.rules' as rules
file
parse_file: reading '/etc/udev/rules.d/z25_persistent-net.rules' as
rules file
parse_file: reading
'/etc/udev/rules.d/z45_persistent-net-generator.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z50_run.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z55_hotplug.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z60_hdparm.rules' as rules file
parse_file: reading
'/etc/udev/rules.d/z60_xserver-xorg-input-wacom.rules' as rules file
parse_file: reading '/etc/udev/rules.d/z75_cd-aliases-generator.rules'
as rules file
parse_file: reading '/etc/udev/rules.d/z99_hal.rules' as rules file
This program is for debugging only, it does not create any node,
or run any program specified by a RUN key. It may show incorrect results,
if rules match against subsystem specfic kernel event variables.
main: looking at device '/block/fd0' from subsystem 'block'
udev_rules_get_name: add symlink 'media/floppy'
udev_rules_get_name: add symlink 'fd0'
udev_rules_get_name: rule applied, 'fd0' becomes 'floppy/0'
udev_device_event: device '/block/fd0' already in database, validate
currently present symlinks
udev_node_add: creating device node '/dev/floppy/0', major = '2', minor
= '0', mode = '0660', uid = '0', gid = '25'
udev_node_add: creating symlink '/dev/media/floppy' to '../floppy/0'
udev_node_add: creating symlink '/dev/fd0' to 'floppy/0'
main: run: 'socket:/org/kernel/udev/monitor'
main: run: 'socket:/org/freedesktop/hal/udev_event'
Kann mir das jemand erklären? Danke für Hinweise.
Viele Grüße
Michael
Reply to: