|
Hallo,
ich hab ein Problem mit einem Tyan TX46 mit 4 Dualcore-Opterons und Debian 2.6.15 und einer neuen Adaptec 29320ALP SCSI-Karte mit einem angesclossenem externen EonStore Raid-System (4TB). Das System erkennt die SCSI-Karte, lädt den ACI7901 Treiber und legt mir auch sdc und sdd an. Das wars aber dann auch schon. Beim Versuch ein Filesystem zu generieren schreibt das System noch ca. 1604 von etwas mehr als 13000 Inode-Tables und bleibt dort lange Zeit hängen. Es tut zwar so als ob es dann weiter gehen würde – tuts aber nicht wirklich. Auf dem Raid-System passieren keine I/Os mehr. In den messages findet sich ein Dump der Adaptec Karte, der für mich aber nicht sehr aufschlussreich ist. Hat irgendwer eine Lösung? Ich brauch den Plattenplatz dringend!
So schauen Teile der messages aus:
…….. May 2 09:24:41 tyan1 kernel: SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB) May 2 09:24:41 tyan1 kernel: SCSI device sda: drive cache: write through May 2 09:24:41 tyan1 kernel: SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB) May 2 09:24:41 tyan1 kernel: SCSI device sda: drive cache: write through May 2 09:24:41 tyan1 kernel: sda: sda1 sda2 < sda5 > May 2 09:24:41 tyan1 kernel: sd 4:0:0:0: Attached scsi disk sda May 2 09:24:41 tyan1 kernel: SCSI device sdb: 142264000 512-byte hdwr sectors (72839 MB) May 2 09:24:41 tyan1 kernel: SCSI device sdb: drive cache: write through May 2 09:24:41 tyan1 kernel: SCSI device sdb: 142264000 512-byte hdwr sectors (72839 MB) May 2 09:24:41 tyan1 kernel: SCSI device sdb: drive cache: write through May 2 09:24:41 tyan1 kernel: sdb: sdb1 May 2 09:24:41 tyan1 kernel: sd 4:0:1:0: Attached scsi disk sdb May 2 09:24:41 tyan1 kernel: scsi6 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 May 2 09:24:41 tyan1 kernel: <Adaptec 29320ALP Ultra320 SCSI adapter> May 2 09:24:41 tyan1 kernel: aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs May 2 09:24:41 tyan1 kernel: May 2 09:24:41 tyan1 kernel: Vendor: IFT Model: A08U-G2421 Rev: 342N May 2 09:24:41 tyan1 kernel: Type: Direct-Access ANSI SCSI revision: 03 May 2 09:24:41 tyan1 kernel: target6:0:6: asynchronous. May 2 09:24:41 tyan1 kernel: scsi6:A:6:0: Tagged Queuing enabled. Depth 32 May 2 09:24:41 tyan1 kernel: target6:0:6: Beginning Domain Validation May 2 09:24:41 tyan1 kernel: target6:0:6: wide asynchronous. May 2 09:24:41 tyan1 kernel: target6:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS PCOMP (6.25 ns, offset 127) May 2 09:24:41 tyan1 kernel: target6:0:6: Ending Domain Validation May 2 09:24:41 tyan1 kernel: SCSI device sdc: 3481600000 512-byte hdwr sectors (1782579 MB) May 2 09:24:41 tyan1 kernel: SCSI device sdc: drive cache: write back May 2 09:24:41 tyan1 kernel: SCSI device sdc: 3481600000 512-byte hdwr sectors (1782579 MB) May 2 09:24:41 tyan1 kernel: SCSI device sdc: drive cache: write back May 2 09:24:41 tyan1 kernel: sdc: unknown partition table May 2 09:24:41 tyan1 kernel: sd 6:0:6:0: Attached scsi disk sdc May 2 09:24:41 tyan1 kernel: Vendor: IFT Model: A08U-G2421 Rev: 342N May 2 09:24:42 tyan1 kernel: Type: Direct-Access ANSI SCSI revision: 03 May 2 09:24:42 tyan1 kernel: scsi6:A:6:1: Tagged Queuing enabled. Depth 32 May 2 09:24:42 tyan1 kernel: SCSI device sdd: 3352070144 512-byte hdwr sectors (1716260 MB) May 2 09:24:42 tyan1 kernel: SCSI device sdd: drive cache: write back May 2 09:24:42 tyan1 kernel: SCSI device sdd: 3352070144 512-byte hdwr sectors (1716260 MB) May 2 09:24:42 tyan1 kernel: SCSI device sdd: drive cache: write back May 2 09:24:42 tyan1 kernel: sdd: unknown partition table May 2 09:24:42 tyan1 kernel: sd 6:0:6:1: Attached scsi disk sdd …….. May 2 09:26:33 tyan1 kernel: scsi6: ILLEGAL_PHASE 0x80 May 2 09:26:33 tyan1 kernel: (scsi6:A:6:0): Abort Message Sent May 2 09:27:00 tyan1 kernel: sd 6:0:6:0: Attempting to queue an ABORT message:CDB: 0x2a 0x0 0x0 0x8 0x0 0x10 0x0 0x4 0x0 0x0 May 2 09:29:50 tyan1 kernel: scsi6: At time of recovery, card was not paused May 2 09:29:50 tyan1 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< May 2 09:29:50 tyan1 kernel: scsi6: Dumping Card State at program address 0x192 Mode 0x11 May 2 09:29:50 tyan1 kernel: Card was paused May 2 09:29:50 tyan1 kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] May 2 09:29:50 tyan1 kernel: SAVED_MODE[0x11] DFFSTAT[0x13]:(CURRFIFO_NONE|FIFO0FREE) May 2 09:29:50 tyan1 kernel: SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] May 2 09:29:50 tyan1 kernel: LASTPHASE[0xa0]:(P_MESGOUT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) May 2 09:29:50 tyan1 kernel: SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] May 2 09:29:50 tyan1 kernel: SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] May 2 09:29:50 tyan1 kernel: PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) May 2 09:29:50 tyan1 kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] May 2 09:29:50 tyan1 atd[6920]: (pam_unix) session opened for user zueger by (uid=1) May 2 09:29:50 tyan1 kernel: LQOSTAT1[0x8]:(LQOSTOPI2) LQOSTAT2[0x21]:(LQOSTOP0) May 2 09:29:50 tyan1 kernel: May 2 09:29:50 tyan1 kernel: SCB Count = 32 CMDS_PENDING = 32 LASTSCB 0x12 CURRSCB 0x3 NEXTSCB 0xff02 May 2 09:29:50 tyan1 kernel: qinstart = 148 qinfifonext = 148 May 2 09:29:50 tyan1 kernel: QINFIFO: May 2 09:29:51 tyan1 kernel: WAITING_TID_QUEUES: May 2 09:29:51 tyan1 kernel: Pending list: May 2 09:29:51 tyan1 kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 11 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 6 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 18 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 4 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 5 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 31 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 14 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 27 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 23 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 0 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 10 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 28 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 29 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 30 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 24 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 9 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 25 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 26 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 21 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 16 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 17 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 19 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 12 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:51 tyan1 kernel: 7 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:52 tyan1 kernel: 15 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:52 tyan1 kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x67] May 2 09:29:52 tyan1 kernel: Total 32 May 2 09:29:52 tyan1 kernel: Kernel Free SCB list: May 2 09:29:52 tyan1 kernel: Sequencer Complete DMA-inprog list: May 2 09:29:52 tyan1 kernel: Sequencer Complete list: May 2 09:29:52 tyan1 kernel: Sequencer DMA-Up and Complete list: May 2 09:29:52 tyan1 kernel: May 2 09:29:52 tyan1 kernel: scsi6: FIFO0 Free, LONGJMP == 0x822d, SCB 0x1b May 2 09:29:52 tyan1 kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) May 2 09:29:52 tyan1 kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) May 2 09:29:52 tyan1 kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] May 2 09:29:52 tyan1 kernel: SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 May 2 09:29:52 tyan1 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) May 2 09:29:52 tyan1 kernel: scsi6: FIFO1 Active, LONGJMP == 0x80ff, SCB 0x3 May 2 09:29:52 tyan1 kernel: SEQIMODE[0x3f]:(Eto offline device May 2 09:29:52 tyan1 kernel: sd 6:0:6:0: rejecting I/O to offline device May 2 09:29:52 tyan1 last message repeated 85 times May 2 09:29:52 tyan1 kernel: sd 6:0:6:0: rejecting I/O to offto offline device May 2 09:29:52 tyan1 kernel: sd 6:0:6:0: rejecting I/O to offline device May 2 09:29:52 tyan1 last message repeated 1393 times ……….
Lg J. Züger
Johann Züger Austrian Research Centers GmbH - ARC TechGate Tower, Ebene 6 Donau-City-Straße 1 A - 1220 Wien Tel.: + 43 (0) 50 550 - 4592 Fax: + 43 (0) 50 550 - 4599 Email: johann.zueger@arcs.ac.at
|