Kein X nach umsteif auf etch
Hallo,
da denkt zum Umstieg auf Etch "Diese Hardware ist so alt, die macht
bestimmt keine Probleme"....
Denkste.
Leute ich bekomme Xorg nicht ans laufen.
Der Monitor ist ein 95er "Siemens Nixdorf Mcm 1751"
Ich habe unter X bisher immer nur mit dpkg-reconfigure
konfiguriert, nie händisch.
Unter Sarge/Xfreee86 kein Problem, der Monitor lief gut.
Unter Etch/Xorg no way.
Entweder ich bekomme die Meldung "No screens found" oder nach änderung
an "VertRefresh" bekomme X nur un 800*600, NIE in 1024*768.
Hier die Kanditaten, die meiner meinug nach Relevand sind
,----[unter sarge perfekt ]
| HorizSync 30-64
| VertRefresh 100
`----
Ich hänge mal die xorg.conf anbei.
Schön wäre es, wenn es diese Meldung "No Screens found" nicht mehr
gäbe. diese Settings liefen ja unter Xfree86 gut...
Heino
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc 264VT4 [Mach64 VT4]"
Driver "ati"
BusID "PCI:0:18:0"
EndSection
Section "Monitor"
Identifier "Siemens"
Option "DPMS"
HorizSync 30-64
VertRefresh 100
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc 264VT4 [Mach64 VT4]"
Monitor "Siemens"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Reply to: