SATA Frust
Hi,
immer wieder habe ich ärger beim Installieren von Sarge (31r4) auf neuer
Hardware,
gerade jetzt wo ich einen hübschen neuen Server bekommen hab möchte ich
unbeding
Debian am laufen haben, der Installer aber erkennt die Platten nicht,
die neueste
Knoppix erkennt diese aber:
knoppix# dmesg
mptbase: Initiating ioc0 bringup
ioc0: SAS1068: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1068, FwRev=00063200h, Ports=1, MaxQ=511, IRQ=16
scsi 0:0:0:0: Direct-Access ATA HDS725050KLA360 AB5A PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA HDS725050KLA360 AB5A PQ: 0 ANSI: 5
scsi 0:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
SCSI device sda: 976562176 512-byte hdwr sectors (500000 MB)
scherzhalber das ganze mit Ubuntu:
ubuntu# dmesg
[42949376.020000] mptbase: Initiating ioc0 bringup
[42949377.540000] ioc0: SAS1068: Capabilities={Initiator}
[42949380.040000] scsi0 : ioc0: LSISAS1068, FwRev=00063200h, Ports=1,
MaxQ=511, IRQ=169
[42949380.040000] Vendor: ATA Model: HDS725050KLA360 Rev: AB5A
[42949380.040000] Type: Direct-Access ANSI SCSI
revision: 05
[42949380.050000] Vendor: ATA Model: HDS725050KLA360 Rev: AB5A
[42949380.050000] Type: Direct-Access ANSI SCSI
revision: 05
[42949380.050000] Vendor: Dell Model: VIRTUAL DISK Rev: 1028
[42949380.050000] Type: Direct-Access ANSI SCSI
revision: 05
[42949380.060000] SCSI device sda: 976562176 512-byte hdwr sectors
(500000 MB)
hat jemand ne Idee dazu ?
Thx Matthias
Reply to: