Re: Festplatte - DriveReady SeekComplete Error
Sven Hartge wrote:
> Claus Malter <debian@sprayen.de> wrote:
>
>
>>Sep 28 17:33:37 distributor kernel: hdb: dma_intr: status=0x51 { DriveReady
>>SeekComplete Error }
>>Sep 28 17:33:38 distributor kernel: hdb: dma_intr: error=0x40 {
>>UncorrectableError }, LBAsect=61603928, sector=61603928
>
>
> Selbst wenn du meinst, das jetzt alles OK sei: eine Platte, die auch nur
> _einmal_ einen solchen Fehler lieferte, wird von mir dem Händler
> persönlich um die Ohren gehauen, alternativ via RMA an den Hersteller
> geschickt. Bisher hat sich noch niemand geweigert, mir die Platte zu
> tauschen (wenn noch Garantie bestand natürlich).
Garantie besteht leider keine mehr.
>
> Was sagt "smartctl -a" zu der Platte? Poste bitte die _komplette_
> Ausgabe.
Bei mittlerweile drei Festplatten hat smartctl Fehler gefunden. Beim Ausführen
von smartctl habe ich auch wieder Fehlermeldungen im Syslog gefunden. Hier der
gesamte Output von smartctl -a /dev/hdx, der mir leider nicht all zu viel sagt.
Bin mal gespannt, was man daraus erkennen kann.
############
# /dev/hdb #
############
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6Y120L0
Serial Number: Y40MV53E
Firmware Version: YAR41VW0
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sat Oct 1 09:05:08 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 63) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 204 200 063 Pre-fail Always - 5514
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 252 246 063 Pre-fail Always - 13
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 250 187 Pre-fail Always - 40918
9 Power_On_Minutes 0x0032 237 237 000 Old_age Always - 243h+30m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 151
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 55
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 11578
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 247 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 196 000 Old_age Offline - 5
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 245 000 Old_age Always - 0
202 TA_Increase_Count 0x000a 253 250 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 10
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 196 192 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 5327 inconsistent with error log pointer 5
ATA Error Count: 5327 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5327 occurred at disk power-on lifetime: 5335 hours (222 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 97 00 00 f0 Error: UNC 8 sectors at LBA = 0x00000097 = 151
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 97 00 00 f0 08 5d+03:31:00.896 READ DMA
ca 00 00 4f 0c 84 fd 08 5d+03:31:00.752 WRITE DMA
ca 00 00 4f 0b 84 fd 08 5d+03:31:00.752 WRITE DMA
ca 00 00 4f 0a 84 fd 08 5d+03:31:00.752 WRITE DMA
ca 00 00 4f 09 84 fd 08 5d+03:31:00.736 WRITE DMA
Error 5326 occurred at disk power-on lifetime: 5291 hours (220 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 90 05 2c f3 Error: UNC 6 sectors at LBA = 0x032c0590 = 53216656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 90 05 2c f3 08 3d+01:15:42.464 READ DMA
c8 00 08 88 05 2c f3 08 3d+01:15:41.264 READ DMA
c8 00 08 80 05 2c f3 08 3d+01:15:40.096 READ DMA
c8 00 08 78 05 2c f3 08 3d+01:15:38.928 READ DMA
c8 00 08 70 05 2c f3 08 3d+01:15:37.760 READ DMA
Error 5325 occurred at disk power-on lifetime: 5291 hours (220 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 88 05 2c f3 Error: UNC 7 sectors at LBA = 0x032c0588 = 53216648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 88 05 2c f3 08 3d+01:15:41.264 READ DMA
c8 00 08 80 05 2c f3 08 3d+01:15:40.096 READ DMA
c8 00 08 78 05 2c f3 08 3d+01:15:38.928 READ DMA
c8 00 08 70 05 2c f3 08 3d+01:15:37.760 READ DMA
c8 00 08 68 05 2c f3 08 3d+01:15:36.576 READ DMA
Error 5324 occurred at disk power-on lifetime: 5291 hours (220 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 80 05 2c f3 Error: UNC 8 sectors at LBA = 0x032c0580 = 53216640
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 05 2c f3 08 3d+01:15:40.096 READ DMA
c8 00 08 78 05 2c f3 08 3d+01:15:38.928 READ DMA
c8 00 08 70 05 2c f3 08 3d+01:15:37.760 READ DMA
c8 00 08 68 05 2c f3 08 3d+01:15:36.576 READ DMA
c8 00 08 60 05 2c f3 08 3d+01:15:35.344 READ DMA
Error 5323 occurred at disk power-on lifetime: 5291 hours (220 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 05 2c f3 Error: UNC 8 sectors at LBA = 0x032c0578 = 53216632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 78 05 2c f3 08 3d+01:15:38.928 READ DMA
c8 00 08 70 05 2c f3 08 3d+01:15:37.760 READ DMA
c8 00 08 68 05 2c f3 08 3d+01:15:36.576 READ DMA
c8 00 08 60 05 2c f3 08 3d+01:15:35.344 READ DMA
c8 00 08 58 05 2c f3 08 3d+01:15:33.904 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
############
# /dev/hdf #
############
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 4W060H4
Serial Number: W406RJXC
Firmware Version: AAH41310
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sat Oct 1 09:03:16 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 47) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0027 252 252 063 Pre-fail Always - 386
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 3
5 Reallocated_Sector_Ct 0x0033 252 252 063 Pre-fail Always - 4
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 252 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 249 248 187 Pre-fail Always - 3196
9 Power_On_Minutes 0x0032 246 246 000 Old_age Always - 296h+56m
10 Spin_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 275
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 253 253 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 252 252 000 Old_age Always - 2
202 TA_Increase_Count 0x000a 252 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 252 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 252 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 252 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 252 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 247 inconsistent with error log pointer 5
ATA Error Count: 247 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 247 occurred at disk power-on lifetime: 2326 hours (96 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 f0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 4f c2 f0 08 5d+13:27:31.840 SMART RETURN STATUS
ec 00 00 77 c1 49 f0 08 5d+13:27:31.824 IDENTIFY DEVICE
c8 00 08 87 01 04 f2 08 5d+10:38:11.376 READ DMA
c8 00 08 8f b4 6e f2 08 5d+10:38:11.376 READ DMA
c8 00 08 27 ef 6b f2 08 5d+10:38:11.376 READ DMA
Error 246 occurred at disk power-on lifetime: 2316 hours (96 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 77 00 58 f2 Error: UNC 8 sectors at LBA = 0x02580077 = 39321719
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 00 58 f2 08 4d+21:39:20.512 READ DMA
c8 00 08 77 00 10 f7 08 4d+21:39:20.496 READ DMA
c8 00 38 07 4e ab f4 08 4d+21:40:12.800 READ DMA
c8 00 60 9f 4d ab f4 08 4d+21:40:12.800 READ DMA
c8 00 80 1f 4d ab f4 08 4d+21:40:12.800 READ DMA
Error 245 occurred at disk power-on lifetime: 2316 hours (96 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 77 00 38 f4 Error: UNC 8 sectors at LBA = 0x04380077 = 70778999
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 00 38 f4 08 4d+21:38:26.272 READ DMA
c8 00 08 7f 10 28 f4 08 4d+21:38:26.272 READ DMA
c8 00 78 bf 77 0b f7 08 4d+21:38:26.224 READ DMA
c8 00 80 3f 77 0b f7 08 4d+21:38:26.224 READ DMA
c8 00 80 bf 76 0b f7 08 4d+21:38:26.208 READ DMA
Error 244 occurred at disk power-on lifetime: 2316 hours (96 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 77 00 38 f4 Error: UNC 8 sectors at LBA = 0x04380077 = 70778999
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 00 38 f4 08 4d+21:25:08.736 READ DMA
c8 00 08 77 10 30 f4 08 4d+21:25:08.720 READ DMA
c8 00 08 77 00 30 f4 08 4d+21:25:08.720 READ DMA
c8 00 08 97 10 20 f4 08 4d+21:25:08.656 READ DMA
c8 00 38 57 29 22 f1 08 4d+21:25:08.624 READ DMA
Error 243 occurred at disk power-on lifetime: 2316 hours (96 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 77 00 58 f2 Error: UNC 8 sectors at LBA = 0x02580077 = 39321719
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 77 00 58 f2 08 4d+21:20:53.712 READ DMA
c8 00 08 77 10 50 f2 08 4d+21:20:53.696 READ DMA
c8 00 08 77 00 50 f2 08 4d+21:20:53.680 READ DMA
c8 00 08 8f 10 40 f2 08 4d+21:20:53.664 READ DMA
c8 00 30 8f a1 de f0 08 4d+21:20:53.648 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
############
# /dev/hdf #
############
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 32049U3
Serial Number: N3H3NVNC
Firmware Version: BAC51KJ0
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sat Oct 1 09:05:51 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 19) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 340651
3 Spin_Up_Time 0x0027 252 252 063 Pre-fail Always - 2
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 66061
8 Seek_Time_Performance 0x0027 251 251 187 Pre-fail Always - 142992346561567
9 Power_On_Minutes 0x0032 227 227 000 Old_age Always - 9171h+27m
10 Spin_Retry_Count 0x002b 252 252 223 Pre-fail Always - 2
11 Calibration_Retry_Count 0x002b 252 252 223 Pre-fail Always - 4
12 Power_Cycle_Count 0x0032 251 251 000 Old_age Always - 848
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 17157
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 273430
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 34360079019
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 340651
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 340651
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 340651
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 340651
207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 2
208 Spin_Buzz 0x002a 252 252 000 Old_age Always - 2
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 2108 inconsistent with error log pointer 5
ATA Error Count: 2108 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2108 occurred at disk power-on lifetime: 2304 hours (96 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 f0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 01 4f c2 f0 08 5d+13:43:37.168 SMART RETURN STATUS
ec 00 00 39 29 ce f0 08 5d+13:43:37.152 IDENTIFY DEVICE
c8 00 08 31 29 ce f0 08 5d+10:49:06.544 READ DMA
c8 00 08 c9 7f c1 f1 08 5d+10:49:06.544 READ DMA
c8 00 08 c1 7f c1 f1 08 5d+10:49:06.528 READ DMA
Error 2107 occurred at disk power-on lifetime: 8530 hours (355 days + 10 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 00 00 b0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 00 00 b0 08 00:08:45.216 IDENTIFY PACKET DEVICE
Error 2106 occurred at disk power-on lifetime: 2237 hours (93 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 00 00 b0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 00 00 b0 00 00:04:32.400 IDENTIFY PACKET DEVICE
Error 2105 occurred at disk power-on lifetime: 8530 hours (355 days + 10 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 00 00 b0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 00 00 b0 08 00:08:32.816 IDENTIFY PACKET DEVICE
c8 00 04 01 00 00 f0 08 00:04:54.640 READ DMA
c8 00 02 01 9f 62 f2 08 00:04:54.608 READ DMA
c8 00 08 00 00 00 f0 08 00:04:54.352 READ DMA
c8 00 08 00 ae 62 f2 08 00:04:54.336 READ DMA
Error 2104 occurred at disk power-on lifetime: 2237 hours (93 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 05 01 00 00 b0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 05 01 00 00 b0 00 00:04:32.400 IDENTIFY PACKET DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
> S°
>
Claus
Reply to: