eigenartige Faxsendabbrueche
Hallo!
Ich habe inzwischen mein Fax getestet und leider will´s nicht so
richtig.
Ich habe also ein Fax verschickt, dieses Fax ist auch angekommen,
dennoch wurde es wieder in die queue gesteckt. Hier das Log aus der
Bestätigungsemail:
-------------------------------------
Your facsimile job to 05251FAXNUMMER was not sent because:
<no reason recorded>
The job will be retried at 13:52.
---- Transcript of session follows ----
Mar 12 13:43:16.28: [ 5058]: SESSION BEGIN 00000037 +49.951.NUMMER
Mar 12 13:43:16.30: [ 5058]: SEND FAX: JOB 37 DEST 05251NUMMER COMMID 00000151
Mar 12 13:43:16.30: [ 5058]: Try to connect to fax number 05251NUMMER in Hylafax mode on controller 1.
Mar 12 13:43:16.33: [ 5058]: Dial and starting transfer of TIFF-File docq/doc37.ps;01 with fine resolution.
Mar 12 13:43:35.13: [ 5058]: Connection established.
Mar 12 13:43:35.13: [ 5058]: StationID = 05251NUMMER
Mar 12 13:43:35.13: [ 5058]: BaudRate = 14400
Mar 12 13:43:35.13: [ 5058]: Flags = HighRes, MR_compr, MMR_compr
Mar 12 13:45:18.49: [ 5058]: Page 1 was sended.
Mar 12 13:46:42.50: [ 5058]: Page 2 was sended. - Last Page!
Mar 12 13:46:44.55: [ 5058]: Fax file completely transfered to CAPI.
Mar 12 13:47:11.45: [ 5058]: Connection dropped with Reason 0x3400 (No additional information).
Mar 12 13:47:11.48: [ 5058]: SESSION END
-------------------------------------
meine /etc/hylafax/config.faxCAPI
---------------/etc/hylafax/config.faxCAPI----------------------
SpoolDir: /var/spool/hylafax
FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd
PollRcvdCmd: /var/spool/hylafax/bin/pollrcvd
FaxReceiveUser: uucp
FaxReceiveGroup: dialout
LogFile: /var/spool/hylafax/log/capi4hylafax
LogTraceLevel: 4
LogFileMode: 0644
{
HylafaxDeviceName: faxCAPI
RecvFileMode: 0664
FAXNumber: +49.951.NUMMER
LocalIdentifier: "Stefan Schilling"
MaxConcurrentRecvs: 2
OutgoingController: 1
OutgoingMSN: NUMMER
SuppressMSN: 0
NumberPrefix:
UseISDNFaxService: 0
RingingDuration: 0
{
Controller: 1
AcceptSpeech: 1
UseDDI: 0
DDIOffset: 0
DDILength:
IncomingDDIs:
IncomingMSNs: NUMMER
AcceptGlobalCall: 0
}
}
--------------Ende /etc/hylafax/config.faxCAPI----------------------
/var/spool/hylafax/log/capi4hylafax.log:
---------/var/log/syslog--------------------
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling ?
with ? BEARER: 3.1 kHz audio, CCITT standardized coding
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling ?
with ? 64 kbit/s, Circuit mode
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling ?
with ? G.711 A-law
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling ?
with ? CHANNEL: BRI, any channel
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg RING
(3.1 kHz audio)
Mar 12 13:43:16 debian isdnlog: Mar 12 13:43:16 * tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg
CHANNEL: BRI, B1 needed
Mar 12 13:43:18 debian isdnlog: Mar 12 13:43:18 tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg
PROGRESS: Public network serving local user
Mar 12 13:43:18 debian isdnlog: Mar 12 13:43:18 tei 85 calling +49
5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg PROGRESS:
inband information available
Mar 12 13:43:18 debian isdnlog: Mar 12 13:43:18 tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg CCNR
moeglich
Mar 12 13:43:26 debian isdnlog: Mar 12 13:43:26 * tei 127 calling
+49 951/NUMMER, Bamberg with ? RING ()
Mar 12 13:43:26 debian isdnlog: Mar 12 13:43:26 tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg Time:
Sat Mar 12 13:43:00 2005
Mar 12 13:43:26 debian isdnlog: Mar 12 13:43:26 tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg COLP
+49 5251/NUMMER, Paderborn
Mar 12 13:43:26 debian isdnlog: Mar 12 13:43:26 tei 85 calling
+49 5251/NUMMER, Paderborn with +49 951/NUMMER, Bamberg CONNECT
(3.1 kHz audio)
[... haufenweise isdnlog-Meldungen über billigere Möglichkeiten ...]
Mar 12 13:47:11 debian isdnlog: Mar 12 13:47:11 tei 85 calling +49
ZIEL/NUMMER, Paderborn with +49 MEINE/NUMMER, Bamberg HANGUP
(4 CI 11.971 ¢ 0:03:45)
Mar 12 13:47:11 debian FaxQueuer[3397]: NOTIFY: bin/notify
"sendq/q37" "requeued" "" "13:52"
Mar 12 13:47:12 debian FaxQueuer[3397]: NOTIFY exit status: 0 (5066)
---------ENDE /var/spool/hylafax/log/capi4hylafax.log---------------
Anscheinend hatte ich vor einiger Zeit diesen Fehler schonmal, jedoch
lags damals daran, dass ich bei meiner Fritz!Classic einen I/O -
Fehler hatte. Ich habe damals die I/O - Adresse umgestellt und fertig.
Diesmal habe ich jedoch eine Fritz!PCI.
Im Übrigen tritt der Fehler nicht immer auf, d.h. es gibt durchaus
Übertragungen, die funktionieren:
debian:/usr/local/src# c2faxsend -v -d NUMMER -f TIFF capi4hylafax-01.02.02/fritz_pic.tif
Try to connect to fax number NUMMER in TIFF mode on controller 1.
Dial and starting transfer of TIFF-File capi4hylafax-01.02.02/fritz_pic.tif with fine resolution.
Connection established.
StationID = +49 951 NUMMER
BaudRate = 64000
Flags = HighRes, MR_compr, MMR_compr
Page 1 was sended. - Last Page!
Fax file completely transfered to CAPI.
Connection dropped with Reason 0x3400 (No additional information).
debian:/usr/local/src#
Die Empfangsemail:
Betreff: Facsimile received from +49 951 NUMMER:
Sender: +49 951 NUMMER
Pages: 1
Quality: Fine
Page: 1728 by 162
Received: 2005:03:12 14:15:24
TimeToRecv: 0:04
SignalRate: 14400 bit/s
DataFormat: 1-D MH
ErrCorrect: No
ReceivedOn: faxCAPI
CommID: c00000152
/var/spool/hylafax/log/capi4hylafax:
Mar 12 14:15:20.40: [ 5849]: CapiFaxSend - INFO: Flags =
HighRes, MR_compr, MMR_compr
Mar 12 14:15:22.78: [ 3818]: c2faxrecv - INFO: Connection established.
Mar 12 14:15:22.78: [ 3818]: c2faxrecv - INFO: StationID =
+49 951 NUMMER
Mar 12 14:15:22.78: [ 3818]: c2faxrecv - INFO: BaudRate = 64000
Mar 12 14:15:22.78: [ 3818]: c2faxrecv - INFO: Flags = HighRes,
MMR_compr
Mar 12 14:15:22.85: [ 3818]: c2faxrecv - INFO: Write fax in path
/var/spool/hylafax to file recvq/fax00031.tif.
Mar 12 14:15:24.31: [ 5849]: CapiFaxSend - INFO: Page 1 was sended.
- Last Page!
Mar 12 14:15:24.31: [ 5849]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
Mar 12 14:15:26.34: [ 3818]: c2faxrecv - INFO: Page 1 was received.
- Last Page!
Mar 12 14:15:28.95: [ 5849]: CapiFaxSend - INFO: Connection dropped
with Reason 0x3400 (No additional information).
Mar 12 14:15:29.03: [ 3818]: c2faxrecv - INFO: Fax received and
calling '/var/spool/hylafax/bin/faxrcvd "recvq/fax00031.tif"
"faxCAPI" "00000152" "" "+49 951 NUMMER" "" "NUMMER"'.
Mar 12 14:15:36.06: [ 3818]: c2faxrecv - INFO: Connection is droped
with reason 0x3400 (No additional information).
Mar 12 14:15:36.06: [ 3818]: c2faxrecv - INFO: SESSION END
Gibt es noch etwas, das ich vielleicht prüfen könnte?
Danke.
Ciao,
Stefan
Reply to: