FritzCard ISA PnP - Verbindungsabbruch nach 10 Sekunden - ISDN - HiSax
Hallo!
Seit einigen Stunden versuche ich meine FritzCard ISA PnP unter Debian
Woody mit Kernel 2.4.20 ans Laufen zu bringen - ohne Erfolg. Wer kann
mir helfen?
Ich benutze die hisax-module mit den Parametern:
type=27 i0=0x240
Die Verbindung wird (zumindest laut Logfiles) aufegbaut und nach ca. 10
s wieder getrennt.
cat /proc/interrupt:
CPU0
0: 240059 XT-PIC timer
1: 5428 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2 XT-PIC soundblaster
8: 1 XT-PIC rtc
11: 203852 XT-PIC eth0
12: 85524 XT-PIC PS/2 Mouse
15: 4423 XT-PIC aic7xxx
NMI: 0
ERR: 7
cat /dev/isdnctrl:
10:27.58 debugging flags card 1 set to 3ff
10:29.31 Ch0 LL->HL SETL2 card 1 3
10:29.31 Ch0 LL->HL SETL3 card 1 0
10:29.31 Ch0 LL->HL DIAL 60214426558 -> 019102345 (7,0)
10:29.31 Ch0 callc State ST_NULL Event EV_DIAL
10:29.31 Ch0 callc ChangeState ST_OUT_DIAL
10:29.31 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no
routine
10:33.31 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no
routine
10:37.31 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no
routine
10:37.31 Ch0 callc State ST_OUT_DIAL Event EV_NOSETUP_RSP
10:37.31 Ch0 HL->LL STAT_DHUP
10:37.31 Ch0 callc ChangeState ST_NULL
10:37.91 Ch0 LL->HL SETL2 card 1 3
10:37.91 Ch0 LL->HL SETL3 card 1 0
10:37.91 Ch0 LL->HL HANGUP
10:37.91 Ch0 callc State ST_NULL Event EV_HANGUP no routine
tail /var/log/messages:
Aug 5 18:47:16 obelix kernel: ippp0: dialing 1 019102345...
Aug 5 18:47:25 obelix kernel: isdn_net: local hangup ippp0
Aug 5 18:47:25 obelix kernel: ippp0: Chargesum is 0
Gruss,
Oliver.
Reply to: