[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Wer hat Woody Isdn und T-Online am laufen



On Fri, 13 Dec 2002 13:55:09 +0100, you wrote:

Hallo Liste,
noch ein Vergleich beider Systeme.


Mandrake:

Dec 13 04:00:27 tiltin2 kernel: ISDN subsystem Rev:
1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
Dec 13 04:00:27 tiltin2 kernel: HiSax: Linux Driver for passive ISDN
cards
Dec 13 04:00:27 tiltin2 kernel: HiSax: Version 3.5 (module)
Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer1 Revision 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer2 Revision 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: TeiMgr Revision 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer3 Revision 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: LinkLayer Revision 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: Approval certification valid
Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with ELSA Microlink
PCI cards
Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with Eicon Technology
Diva 2.01 PCI cards
Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with Sedlbauer
Speedfax + cards
Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with HFC-S PCI A based
cards
Dec 13 04:00:27 tiltin2 kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax
(0)
Dec 13 04:00:27 tiltin2 kernel: HiSax: AVM PCI driver Rev. 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: PCI: Found IRQ 5 for device 00:0d.0
Dec 13 04:00:27 tiltin2 kernel: AVM PCI: stat 0x2020a
Dec 13 04:00:27 tiltin2 kernel: AVM PCI: Class A Rev 2
Dec 13 04:00:27 tiltin2 kernel: HiSax: AVM Fritz!PCI config irq:5
base:0xD800
Dec 13 04:00:27 tiltin2 kernel: AVM PCI: ISAC version (0): 2086/2186
V1.1
Dec 13 04:00:27 tiltin2 kernel: AVM Fritz PnP/PCI: IRQ 5 count 0
Dec 13 04:00:27 tiltin2 kernel: AVM Fritz PnP/PCI: IRQ 5 count 5
Dec 13 04:00:27 tiltin2 kernel: HiSax: DSS1 Rev. 1.1.4.1
Dec 13 04:00:27 tiltin2 kernel: HiSax: 2 channels added
Dec 13 04:00:27 tiltin2 kernel: HiSax: MAX_WAITING_CALLS added
Dec 13 04:00:27 tiltin2 ipppd[12174]: Found 2 devices: /dev/ippp0,
/dev/ippp0
Dec 13 04:00:27 tiltin2 ipppd[12175]: ipppd i2.2.11 (isdn4linux
version of pppd by MH) started
Dec 13 04:00:27 tiltin2 ipppd[12175]: init_unit: 0 
Dec 13 04:00:27 tiltin2 ipppd[12175]: Connect[0]: /dev/ippp0, fd: 12
Dec 13 04:00:27 tiltin2 ipppd[12175]: init_unit: 1 
Dec 13 04:00:27 tiltin2 ipppd[12175]: Connect[1]: /dev/ippp0, fd: 13
Dec 13 04:00:28 tiltin2 kernel: ippp0: dialing 1 00191011...
Dec 13 04:00:30 tiltin2 ipppd[12175]: Local number: 42, Remote number:
00191011, Type: outgoing
Dec 13 04:00:30 tiltin2 ipppd[12175]: PHASE_WAIT -> PHASE_ESTABLISHED,
ifunit: 0, linkunit: 0, fd: 12
Dec 13 04:00:30 tiltin2 kernel: isdn_net: ippp0 connected
Dec 13 04:00:30 tiltin2 ipppd[12175]: ioctl(SIOCSIFMTU): Invalid
argument, 11 ippp0 1524.
Dec 13 04:00:31 tiltin2 ipppd[12175]: Remote message: 
Dec 13 04:00:31 tiltin2 ipppd[12175]: MPPP negotiation, He: No We: No
Dec 13 04:00:31 tiltin2 ipppd[12175]: CCP enabled! Trying CCP. 
Dec 13 04:00:31 tiltin2 ipppd[12175]: CCP: got ccp-unit 0 for link 0
(protocol: 0x80fd)
Dec 13 04:00:31 tiltin2 ipppd[12175]: ccp_resetci! 
Dec 13 04:00:31 tiltin2 last message repeated 2 times
Dec 13 04:00:31 tiltin2 ipppd[12175]: local  IP address 62.157.45.172
Dec 13 04:00:31 tiltin2 ipppd[12175]: remote IP address
193.158.135.161
Dez 13 04:00:39 tiltin2 net_monitor.real[12122]: launched command:
/usr/sbin/logdrake --file=/var/log/messages &
Dez 13 04:00:39 tiltin2 logdrake[12237]: ### Program is starting ###
Dez 13 04:00:49 tiltin2 net_monitor.real[12122]: launched command:
/etc/sysconfig/network-scripts/net_cnx_down &
Dec 13 04:00:49 tiltin2 ipppd[12175]: Modem hangup
Dec 13 04:00:49 tiltin2 ipppd[12175]: Connection terminated.
Dec 13 04:00:49 tiltin2 ipppd[12175]: taking down PHASE_DEAD link 0,
linkunit: 0
Dec 13 04:00:49 tiltin2 ipppd[12175]: LCP is down
Dec 13 04:00:49 tiltin2 ipppd[12175]: closing fd 12 from unit 0
Dec 13 04:00:49 tiltin2 ipppd[12175]: link 0 closed , linkunit: 0
Dec 13 04:00:49 tiltin2 ipppd[12175]: reinit_unit: 0 
Dec 13 04:00:49 tiltin2 ipppd[12175]: Connect[0]: /dev/ippp0, fd: 12
Dec 13 04:00:49 tiltin2 kernel: isdn_net: local hangup ippp0


Woody:

NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 1233k freed
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 280k freed
Adding Swap: 240932k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1
loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: AVM PCI driver Rev. 1.1.4.1
AVM PnP: Class A Rev 2
AVM PCI/PnP: reset
spurious 8259A interrupt: IRQ7.
AVM PCI/PnP: S1 0
HiSax: AVM Fritz!PnP config irq:5 base:0xD800
AVM PnP: ISAC version (0): 2086/2186 V1.1
AVM Fritz PnP/PCI: IRQ 5 count 0
AVM Fritz PnP/PCI: IRQ 5 count 3
HiSax: DSS1 Rev. 1.1.4.1
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
isdn: Verbose-Level is 3
HiSax: debugging flags card 1 set to 4
ippp, open, slot: 0, minor: 0, state: 0000
ippp_ccp: allocated reset data structure ce6cf000


Ist halt mal wieder ein wenig hoffnug..

Gruß Tilo Johannsen


Tilo-Johannsen@T-Online.de



Reply to: